Opens in a new tab

25LC320A-I

Microchip 25-series SPI EEPROM, 32Kbit/4KB, 10MHz, 2.5-5.5V, 32B page (A revision), WP+HOLD, 1M cycles, industrial -40~85°C, 8-pin

18000

Effective Inventory

Image for reference only

Manufacturer Part:

25LC320A-I

Package:

8-pin PDIP/SOIC/TSSOP/DFN options, A revision with 32-byte page size (improved from original 16-byte)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The 25LC320A-I is a 32 Kbit (4 K x 8) SPI serial EEPROM from Microchip Technology, operating at 2.5 V to 5.5 V with industrial temperature range (-40 °C to +85 °C). The ‘A’ revision offers enhanced features compared to the original 25LC320, including a 32-byte page size and improved performance. This compact non-volatile memory is ideal for storing configuration parameters, sensor calibration data, and device identification information.

Organized as 4,096 bytes (4 KB), the 25LC320A features byte write and 32-byte page write capability with typical 3 ms write cycle time. The device supports SPI modes 0,0 and 1,1 at clock frequencies up to 10 MHz, providing efficient data transfer for small to medium parameter storage applications.

The device includes comprehensive write protection: hardware Write-Protect (WP) pin and software-configurable block protection (BP0, BP1) allowing protection of 1/4, 1/2, or the entire memory array. A /HOLD pin enables pausing of serial communication. With over 1 million erase/write cycles and greater than 200-year data retention, the 25LC320A offers Microchip’s proven EEPROM reliability in a small, cost-effective 8-pin package.

Key Specifications

Parameter Value
Memory Type SPI Serial EEPROM
Density 32 Kbit (4 Kbyte)
Organization 4,096 x 8 bits
Interface SPI (Modes 0,0 and 1,1)
Max Clock Frequency 10 MHz
Operating Voltage 2.5 V to 5.5 V
Page Size 32 bytes (A revision)
Page Write Time 5 ms max (typical 3 ms)
Read Current 2 mA max @ 5.5 V
Standby Current 5 µA max
Write Protect HW WP pin + SW block protection (BP0/1)
HOLD Function Yes
Endurance 1,000,000 cycles
Data Retention > 200 years
Operating Temperature -40 °C to +85 °C (industrial)
Packages 8-pin PDIP, SOIC, TSSOP, DFN

Features

  • 32 Kbit (4 K x 8) SPI serial EEPROM
  • 10 MHz max clock frequency
  • SPI modes 0,0 and 1,1
  • 2.5 V to 5.5 V operation
  • 32-byte page write
  • Block protection (BP0, BP1)
  • Hardware WP pin + /HOLD pin
  • Sequential read
  • Self-timed write cycle
  • Power-on reset / brown-out
  • > 1M cycles, > 200-year retention
  • Industrial temperature range
  • RoHS compliant

Applications

  • Configuration parameter storage
  • Sensor calibration and trim data
  • Device serial number and ID
  • Power supply settings
  • Display configuration data
  • Small event logging
  • Consumer electronics settings
  • IoT sensor nodes
Product Introduction: 25LC320A-I Product Introduction

The 25LC320A-I is a 32 Kbit (4,096 x 8-bit) SPI serial EEPROM from Microchip Technology, featuring the ‘A’ revision with enhanced specifications including a 32-byte page size (double that of the original 25LC320). The -I suffix denotes industrial temperature range (-40°C to +85°C), and LC indicates 2.5 V minimum operating voltage.

With 4 KB of non-volatile storage, the 25LC320A is designed for storing configuration parameters, sensor calibration data, device serial numbers, and user preferences. It occupies a sweet spot between smaller 8K/16K devices (too limited for some applications) and larger 64K/128K devices (overkill for simple parameter storage), providing ample capacity for most embedded configuration needs at minimal cost.

The ‘A’ revision brought several improvements over the original 25LC320, most notably doubling the page size from 16 to 32 bytes, which significantly improves write throughput for multi-byte data. The SPI interface supports both Mode 0 (0,0) and Mode 3 (1,1) at up to 10 MHz clock frequency.

Write protection features include a hardware Write-Protect (WP) pin and software block protection bits (BP0, BP1) in the status register, providing protection for none, 1/4, 1/2, or the entire memory array. A /HOLD pin allows pausing SPI communication for bus sharing. Built-in power-on reset and brown-out detection ensure reliable operation during power transitions.

The device features over 1 million erase/write cycles and greater than 200-year data retention, consistent with Microchip’s high EEPROM reliability standards. Available in multiple 8-pin packages including PDIP (through-hole), SOIC, TSSOP, and DFN (surface mount) to accommodate various design requirements.

Working Principle: 25LC320A-I Working Principle

Same architecture as other 25-series SPI EEPROMs with 4 KB density:
1. 4,096 bytes EEPROM array, 32-byte pages (A revision)
2. 4-wire SPI: /CS, SCK, SI, SO. Modes 0 and 3, 10 MHz max
3. Standard instructions: READ, WRITE, WREN, WRDI, RDSR, WRSR
4. Status register with WIP, WEL, BP0, BP1, WPEN bits
5. Block protection: 0, 1/4, 1/2, or full array
6. Low power: 2 mA read, 5 µA standby
7. POR and brown-out protection

Pin Description: 25LC320A-I Pin Definition and Functions

Standard 8-pin 25-series pinout: /CS (1), SO (2), /WP (3), Vss (4), SI (5), SCK (6), /HOLD (7), Vcc (8). 8-pin PDIP/SOIC/TSSOP/DFN packages. Industrial -40°C to +85°C.

Application Scenarios: In which products and applications is 25LC320A-I used
  • Configuration Parameter Storage: Embedded systems storing device configuration, mode settings, and power-on defaults. 4 KB capacity handles typical configuration tables without excess.
  • Sensor Calibration and Trim Data: Smart sensors and analog front-ends storing per-unit calibration coefficients, offset/gain trim values, and temperature compensation tables.
  • Device Serial Number and ID: Board-level identification, product serialization, and MAC address storage. Write protection locks factory data against accidental modification.
  • Power Supply Settings: Programmable power converters and battery chargers storing output voltage/current setpoints, protection thresholds, and operating profiles.
Alternative Models: What chips are recommended as replacements for 25LC320A-I
Manufacturer Part Number Density Page Size Notes
Microchip 25LC320-I/SN (non-A) 32 Kbit 16 B Original, smaller page
Microchip 25AA320A-I/SN 32 Kbit 32 B 1.8V min voltage
Microchip 25LC640A-I/SN 64 Kbit 32 B Double density
STMicro M95320-WDW6TP 32 Kbit 32 B ST M95 series

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1