Opens in a new tab

A2412S-2WRS

Isolated DC-DC converter module, 24V input, 12V output, 2W, 1500VDC isolation, SIP-7 package, 86% efficiency, -40 degC to +105 degC, MORNSUN A_S-2WR2 series.

9840

Effective Inventory

Image for reference only

Manufacturer Part:

A2412S-2WRS

Package:

SIP-7 (Through-Hole)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The A2412S-2WRS is a 2W isolated DC-DC converter module with a 24V input and 12V single output, manufactured by MORNSUN (Guangzhou Mornsun Science & Technology). Part of the A_S-2WR2 series, this compact SIP-packaged module provides 1500VDC input-output isolation with high efficiency up to 86%. Designed for general-purpose PCB mounting applications, the module features a wide operating temperature range of -40°C to +105°C (with derating above 85°C) and requires no external components for basic operation. The miniature SIP-7 package measures only 19.65 x 7.05 x 10.16mm, making it suitable for space-constrained designs in industrial control, instrumentation, and communication equipment. The A2412S-2WRS meets CISPR32/EN55032 Class B EMC standards with appropriate external filtering components and provides 10% minimum load requirement for stable operation.

Key Specifications

Parameter Value
Input Voltage (Nominal) 24 VDC
Input Voltage Range 21.6 V to 26.4 VDC (10% of nominal)
Output Voltage 12 VDC (regulated single output)
Output Current (Rated) 167 mA (2W / 12V)
Output Power 2 W
Isolation Voltage 1500 VDC (1 minute, 1mA max leakage)
Efficiency (Typical) Up to 86%
Line Regulation 1.2% (typ) for 1% input change
Load Regulation 8% (typ) at 12V output, 10%-100% load
Ripple & Noise 75 mV (typ), 200 mV (max) / 20MHz bandwidth
Temperature Coefficient 0.03 %/degC (full load)
Switching Frequency 100 kHz (typ) at full load, nominal input
Minimum Load 10% of rated load (recommended for stability)
Insulation Resistance 1000 MOhm (min) @ 500VDC
Isolation Capacitance 20 pF (typ) @ 100kHz/0.1V
Operating Temperature -40 degC to +105 degC (derating above 85 degC)
Storage Temperature -55 degC to +125 degC
MTBF 3,500,000 hours (MIL-HDBK-217F @ 25 degC)
Package SIP-7 (Single In-line Package, 7 pins)
Dimensions 19.65 x 7.05 x 10.16 mm
Weight 2.4 g (typical)

Features

  • High power density in compact SIP-7 package
  • High efficiency up to 86% for reduced thermal dissipation
  • 1500VDC input-output isolation for safety and noise immunity
  • Wide operating temperature range: -40 degC to +105 degC
  • No external components required for basic operation
  • Industry-standard SIP pinout for drop-in compatibility
  • Low ripple and noise performance
  • Low temperature coefficient: 0.03%/degC
  • CISPR32/EN55032 Class B EMC compliant (with external filter components)
  • UL94V-0 flame-retardant plastic case
  • MTBF of 3.5 million hours per MIL-HDBK-217F
  • RoHS compliant and environmentally friendly
  • Designed for PCB through-hole mounting

Applications

  • Industrial control and automation equipment
  • Instrumentation and measurement systems
  • Communication and networking equipment
  • Distributed power supply architectures
  • Battery-operated and portable equipment
  • Isolated sensor interface circuits
  • Medical and healthcare devices (non-patient contact)
  • Data acquisition and signal conditioning
Product Introduction: A2412S-2WRS Product Introduction

The A2412S-2WRS is a 2-watt isolated DC-DC converter module from MORNSUN’s A_S-2WR2 series, designed for general-purpose PCB mounting applications requiring galvanic isolation between input and output circuits. With a 24V nominal input (21.6V to 26.4V range) and a regulated 12V single output rated at 167mA, this module provides a compact and efficient power solution for distributed power architectures. The 1500VDC isolation rating provides electrical separation between input and output, helping to break ground loops, reduce noise coupling, and enhance system safety. The module achieves high efficiency up to 86%, minimizing power loss and thermal rise in the application. The SIP-7 single-in-line package with dimensions of just 19.65 x 7.05 x 10.16mm provides excellent power density for space-constrained designs. Operating temperature range extends from -40 degC to +105 degC, with power derating required above 85 degC for reliable operation. No external components are required for basic operation, simplifying design and reducing bill of materials. For applications requiring stricter electromagnetic compliance, external filter components can be added to achieve CISPR32/EN55032 Class B EMC performance. The module features a plastic case with UL94V-0 flame-retardant rating and is compatible with wave soldering processes. With an MTBF (mean time between failures) rating of 3.5 million hours per MIL-HDBK-217F at 25 degC, the A2412S-2WRS provides high reliability for demanding applications. A minimum load of 10% of rated output is recommended to ensure stable operation across all conditions. The A2412S-2WRS is widely used in industrial control systems, instrumentation and measurement equipment, communication devices, data acquisition systems, and other applications requiring isolated power conversion in a compact form factor.

Working Principle: A2412S-2WRS Working Principle

The A2412S-2WRS is a fixed-frequency flyback DC-DC converter that operates by switching the input DC voltage at high frequency (typically 100 kHz) through a transformer to provide galvanic isolation and voltage transformation between the input and output. The converter consists of several key functional blocks: an input filter that conditions the input voltage and suppresses switching noise reflected back to the source; an oscillator and switching regulator that controls the power MOSFET to drive the transformer primary; a transformer that provides galvanic isolation and steps the voltage to the desired output level; a rectifier (typically a Schottky diode for low forward drop) that converts the high-frequency AC from the transformer secondary back to DC; an output filter capacitor that smooths the rectified output to provide low-ripple DC; and a feedback control loop that regulates the output voltage by adjusting the switching duty cycle. The flyback topology stores energy in the transformer’s magnetic field during the switch ON time and delivers it to the output during the switch OFF time, making it naturally suited for isolated step-down (or step-up) conversion with relatively low power levels. The isolation is provided by the transformer’s primary-to-secondary insulation, which is rated at 1500VDC for this device. The switching frequency of approximately 100 kHz represents a balance between component size (higher frequency allows smaller magnetics and capacitors) and switching losses (higher frequency increases losses and reduces efficiency). The regulation is achieved through a feedback mechanism that samples the output voltage and adjusts the duty cycle accordingly. For isolated converters like this, the feedback signal is typically transferred across the isolation boundary using either an optocoupler or a transformer-coupled feedback winding. The converter enters discontinuous conduction mode at light loads, which can increase output ripple; hence the recommendation for a minimum 10% load to maintain stable operation and specified performance.

Pin Description: A2412S-2WRS Pin Definition and Functions
Pin No. Name Description
1 Vin (+) Positive input voltage – connect to 24V DC supply; connect input capacitor near this pin
2 0V (GND) Input return / common – input ground connection; connect to input supply return
3 NC / Case No internal connection / case pin – may be connected to chassis or shield ground if desired
4 -Vo Negative output – output return / common; connect to output load return
5 NC No connection – not internally connected; leave floating or connect to common
6 +Vo Positive output – 12V DC output; connect output capacitor and load
7 NC No connection – not internally connected; leave floating
Application Scenarios: In which products and applications is A2412S-2WRS used
  • Industrial PLC and distributed control system isolated power supplies
  • Instrumentation and measurement system isolated sensor interfaces
  • Telecommunication and networking equipment isolated rails
  • 4-20mA current loop transmitter power supplies
  • Data acquisition and signal conditioning isolated circuits
  • Portable and battery-powered instrumentation
  • Medical equipment isolated auxiliary power (non-patient contact)
  • Building automation and HVAC control systems
  • Test and measurement equipment isolation barriers
Alternative Models: What chips are recommended as replacements for A2412S-2WRS
Model Manufacturer Key Difference
B2412S-2WR2 MORNSUN Same specs, B-series with enhanced EMC performance (Class B without filters)
F2412S-2WR3 MORNSUN 3000VDC higher isolation, same power and package
A2412S-2WR3 MORNSUN 2W, 24V to 12V, R3 generation with improved performance
WRB2412S-2WR3 MORNSUN Wide 4:1 input range (9-36V), regulated output, SIP package
REC24-1205DRW/H2 RECOM 2W, 24V to 12V, alternative manufacturer, DIP/SIP

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1