Opens in a new tab

Home » Diodes, Integrated Circuits ICs » ADAU1701JSTZ-RL

ADAU1701JSTZ-RL

SigmaDSP 28/56-bit audio processor with 2x ADC + 4x DAC, 50 MIPS, 192kHz, self-boot from EEPROM, I2C/SPI control, 48-LQFP, ADI ADAU1701 series.

3860

Effective Inventory

Image for reference only

Manufacturer Part:

ADAU1701JSTZ-RL

Package:

48-Lead LQFP (7mm x 7mm)

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The ADAU1701JSTZ-RL is a complete single-chip SigmaDSP audio system from Analog Devices, integrating a 28/56-bit audio DSP core, stereo ADC, quad DAC, and microcontroller-like control interfaces on a single die. With 50 MIPS of digital audio processing power and a 28-bit x 28-bit multiplier with 56-bit accumulator for full double-precision processing, the device delivers studio-quality audio signal processing including equalization, crossover, bass enhancement, multiband dynamics processing, delay compensation, speaker compensation, and stereo image widening. The on-board stereo sigma-delta ADC achieves 100 dB SNR and -83 dB THD+N, while the four-channel DAC delivers 104 dB SNR and -90 dB THD+N. A key feature is the complete standalone operation capability: programs can be loaded from an external serial EEPROM via self-boot at power-up, requiring no microcontroller. The device also supports control via I2C or 4-wire SPI, includes an auxiliary ADC with 4-input multiplexer for analog controls, multipurpose GPIO pins, and an integrated PLL supporting multiple clock multiplier ratios. Packaged in a 48-lead LQFP (7mm x 7mm), the ADAU1701JSTZ-RL supports sampling rates up to 192 kHz and is programmed using the intuitive SigmaStudio graphical development tool.

Key Specifications

Parameter Value
DSP Core Architecture 28/56-bit SigmaDSP audio processor
DSP Performance 50 MIPS
Multiplier 28-bit x 28-bit with 56-bit accumulator (full double precision)
Program RAM 1024 instructions / cycle
Parameter RAM 1k words
Data / Delay Memory 2k words (40ms delay memory)
Audio ADCs 2-channel sigma-delta ADC, 100 dB SNR, -83 dB THD+N
Audio DACs 4-channel sigma-delta DAC, 104 dB SNR, -90 dB THD+N
Auxiliary ADC 4-input multiplexed auxiliary ADC for analog controls
Dynamic Range (In to Out) 98.5 dB analog-to-analog
Maximum Sample Rate 192 kHz
Serial Audio Interface I2S-compatible, left/right justified, TDM modes
Control Interfaces I2C bus, 4-wire SPI port
Self-Boot Yes – from serial EEPROM, standalone operation
GPIO / Multipurpose Pins Multiple MP pins for digital controls and outputs
Clock Source Crystal oscillator + PLL (64x, 256x, 384x, 512x fs)
Supply Voltage 3.3V (on-board 1.8V regulator for digital core)
Development Tool SigmaStudio graphical programming environment
Safeload Parameter Updates Yes – click-free parameter changes
Package 48-Lead LQFP (7mm x 7mm)
Packing Tape and reel, 500 pieces per reel
Operating Temperature -40 degrees C to +85 degrees C (commercial)

Features

  • Complete single-chip audio system: DSP + ADC + DAC + control
  • 28/56-bit architecture with 50 MIPS processing power
  • Full double-precision 56-bit processing for studio-grade audio
  • Stereo ADC with 100 dB SNR and -83 dB THD+N
  • 4-channel DAC with 104 dB SNR and -90 dB THD+N
  • Complete standalone operation – self-boot from EEPROM
  • Auxiliary 4-input ADC for analog volume/tone controls
  • Multipurpose GPIO pins for digital controls and indicators
  • Fully programmable via SigmaStudio graphical development tool
  • Extensive algorithm library: biquads, dynamics, delay, mixer, etc.
  • Safeload feature for click-free parameter updates
  • PLL generates master clock from external crystal
  • Supports 64x, 256x, 384x, and 512x clock multiplier ratios
  • I2S, left-justified, right-justified, and TDM serial modes
  • Sampling rates up to 192 kHz
  • On-board 1.8V regulator for 3.3V single-supply operation
  • Parameter save-back to EEPROM on power-down
  • 48-lead LQFP 7x7mm small footprint package
  • Tape and reel packaging (RL suffix) for automated assembly
  • Third-party plugin algorithms: SRS, BBE, DTS, etc.

Applications

  • Multimedia speaker systems and sound bars
  • MP3 player speaker docks and portable audio
  • Automotive head units and car audio systems
  • Mini-component stereos and home audio
  • Digital televisions and flat panel display audio
  • Studio monitors and professional audio equipment
  • Speaker crossovers and active speaker systems
  • Musical instrument effects processors
  • In-seat sound systems for aircraft and motor coaches
  • Headphone amplifiers with DSP processing
Product Introduction: ADAU1701JSTZ-RL Product Introduction

The ADAU1701JSTZ-RL is a highly integrated single-chip audio system from Analog Devices SigmaDSP product line, combining a powerful 28/56-bit digital audio processor with stereo ADCs, four-channel DACs, and comprehensive control interfaces all in a single 48-lead LQFP package. At the heart of the device is a 50 MIPS audio DSP core with 28-bit word length and 56-bit double-precision accumulator, enabling studio-quality audio signal processing with extremely low distortion and noise. The processing capabilities include equalization (parametric EQ, graphic EQ), crossovers, bass enhancement, multi-band dynamics processing (compression, limiting, expansion), delay compensation, speaker compensation, and stereo image enhancement – all configurable through the intuitive SigmaStudio graphical programming environment. The analog front end consists of two sigma-delta ADCs achieving 100 dB SNR and -83 dB THD+N, and four sigma-delta DACs delivering 104 dB SNR and -90 dB THD+N, providing a total analog-to-analog dynamic range of 98.5 dB. A standout feature is the self-boot capability, which allows the ADAU1701 to operate completely standalone without a microcontroller by loading its program from an external serial EEPROM at power-up. Parameters can be saved back to the EEPROM on power-down for persistent settings. For system integration, the device provides I2C and 4-wire SPI control interfaces, an auxiliary 4-input ADC for reading analog controls like volume pots, and multiple multipurpose GPIO pins that can be configured for digital inputs, outputs, serial data, or control functions. The integrated PLL generates the master clock from an external crystal, supporting 64x, 256x, 384x, and 512x sample rate multiplier ratios. The on-board 1.8V regulator allows operation from a single 3.3V supply, reducing external component count. The ADAU1701JSTZ-RL is supplied in tape and reel packaging for automated SMT assembly, with 500 pieces per reel.

Working Principle: ADAU1701JSTZ-RL Working Principle

The ADAU1701 operates as a complete digital audio processing system that can accept analog or digital audio input, process it with programmable DSP algorithms, and output the processed audio as analog or digital. At power-up, the device can boot in one of two modes: self-boot mode where it loads program code from an external serial EEPROM (selected by the SELFBOOT pin), or I2C/SPI control mode where an external microcontroller writes the program and parameters into the DSP memory. The DSP core uses a Harvard architecture with separate program and data memories. It executes audio processing algorithms on a sample-by-sample basis at the audio sampling rate, with each instruction executing in a single clock cycle. The 28-bit data path with 56-bit double-precision accumulator ensures that even with cascaded processing stages, the noise and distortion remain extremely low – comparable to high-end studio equipment. The safeload feature allows parameters to be updated during operation without causing clicks or pops in the audio, by writing to temporary registers that are then transferred to the active registers at a safe point in the audio cycle. The analog audio path uses sigma-delta conversion technology for both ADC and DAC. The ADC accepts current-mode inputs, allowing the full-scale voltage to be scaled with an external resistor. The DAC provides voltage outputs that can drive line-level loads directly. The PLL multiplies the external crystal frequency to generate the high-speed master clock required for the DSP core and sigma-delta converters. For analog control, the auxiliary ADC with its 4-input multiplexer can read potentiometers, rotary encoders, or other analog control signals, with the DSP handling the control logic and parameter mapping. GPIO pins provide additional flexibility for digital control inputs (pushbuttons, switches) and outputs (LED indicators, relay drivers, etc.).

Pin Description: ADAU1701JSTZ-RL Pin Definition and Functions
Pin Group Pins Description
Analog Audio Inputs ADC0, ADC1, ADC_RES Stereo audio ADC inputs (current mode, set full-scale with external resistor)
Analog Audio Outputs OUT0-OUT3 Four DAC output channels
Power Supply DVDD, AVDD, IOVDD, PVDD Digital 1.8V, Analog 3.3V, I/O 3.3V, Power 3.3V; decouple each to ground
Ground AGND, DGND, PGND Analog, digital, and power grounds
Oscillator XTALOUT, MCLKI Crystal oscillator pins for master clock generation
PLL PLL_MODE[1:0], PLL_LF PLL mode selection pins and loop filter
Control Interface SDA/COUT, SCL/CCLK, ADDR[0:1], CLATCH/WP I2C / SPI control port pins
Reset & Boot RESET, SELFBOOT Active-low reset and self-boot mode select
Multipurpose Pins MP0-MP11 12 multipurpose pins: GPIO, serial audio I/O, digital control, etc.
Auxiliary ADC AUXADC0-AUXADC3 4-channel auxiliary ADC inputs for analog control signals
Filter Pins FILTA, FILTD, CM ADC filter, DAC filter, and common-mode voltage reference
Application Scenarios: In which products and applications is ADAU1701JSTZ-RL used
  • Multimedia speaker systems: 2.1, 5.1 channel home theater audio
  • MP3 player docking stations and portable speaker systems
  • Automotive head units and car audio signal processing
  • Mini-component stereos and bookshelf speaker systems
  • Digital TV and flat panel display audio enhancement
  • Studio monitor speakers and nearfield monitors
  • Active speaker crossovers and bi-amped/tri-amped speaker systems
  • Musical instrument effects pedals and processors
  • Aircraft and motor coach in-seat entertainment audio
  • Soundbars and sound bases with virtual surround processing
Alternative Models: What chips are recommended as replacements for ADAU1701JSTZ-RL
Model Manufacturer Key Difference
ADAU1702 Analog Devices Same DSP core, 512 instructions / 0.5k data memory (smaller RAM), lower cost
ADAU1401 Analog Devices Automotive grade version, -40C to +105C, AEC-Q100 qualified
ADAU1761 Analog Devices SigmaDSP with integrated CODEC, 4k data memory, low-power, LFCSP
ADAU1452 Analog Devices 1452MIPS enhanced SigmaDSP, much higher performance, no integrated ADC/DAC
CS48L21 Cirrus Logic Audio DSP with integrated codec, alternative vendor for similar applications

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1