Opens in a new tab

Home » Diodes, Integrated Circuits ICs » ADAU1772BCPZ

ADAU1772BCPZ

Low-power 4ADC/2DAC audio codec with DSP, 38us analog-to-analog latency, 102dB/107dB SNR, ANC headsets, ASRC, PDM I/O, self-boot, 40-LFCSP 6x6mm, ADI SigmaDSP.

4280

Effective Inventory

Image for reference only

Manufacturer Part:

ADAU1772BCPZ

Package:

40-Lead LFCSP (6mm x 6mm, EP)

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The ADAU1772BCPZ is a low-power audio codec with integrated digital audio processor from Analog Devices, specifically designed for noise-cancelling headsets and headphone applications. Featuring four analog-to-digital converters (ADCs) and two digital-to-analog converters (DACs) along with a programmable audio processing engine, the device provides a complete headset solution requiring only a few passive components, a crystal, and an EEPROM for booting. The signal path from analog input through DSP to analog output is optimized for ultra-low latency (38 microseconds analog-to-analog), critical for active noise cancellation applications. The ADCs achieve 102 dB SNR through the PGA and ADC path, while the combined DAC and headphone path delivers 107 dB SNR, both A-weighted. The 24-bit converters support sample rates from 8 kHz to 192 kHz with full-duplex asynchronous sample rate converters (ASRCs). The on-board PLL accepts input clocks from 8 MHz to 27 MHz. Additional features include four single-ended analog inputs configurable as microphone or line inputs, stereo digital microphone inputs, stereo analog output configurable as line or headphone driver, seven multipurpose pins, and self-boot from I2C EEPROM. Packaged in a 40-lead LFCSP (6mm x 6mm with exposed pad), the ADAU1772BCPZ consumes only 15 mW for a typical noise-cancelling solution, making it ideal for battery-powered headsets.

Key Specifications

Parameter Value
Audio Processing Engine Programmable digital audio DSP
Processing Path Sample Rate Up to 192 kHz
Algorithms Biquad filters, limiters, volume controls, mixing
Audio ADCs 4-channel 24-bit, low latency
ADC SNR (A-weighted) 102 dB (through PGA + ADC)
Audio DACs 2-channel 24-bit, low latency
DAC + Headphone SNR (A-wt) 107 dB combined
Analog-to-Analog Latency 38 microseconds
Serial Port Sample Rates 8 kHz to 192 kHz
Analog Inputs 4 single-ended, configurable as mic or line input
Digital Microphone Inputs Dual stereo PDM digital microphone inputs
Analog Outputs Stereo, single-ended or differential, line or headphone driver
ASRC Full-duplex asynchronous sample rate converters
PLL Input Clock Range 8 MHz to 27 MHz
Power Supply Range (I/O) 1.8 V to 3.3 V
DSP Core Voltage 1.1 V to 1.8 V
Power Consumption (ANC mode) 15 mW typical (noise cancelling solution)
Control Interfaces I2C and SPI control ports
Self-Boot Yes – from I2C EEPROM
Multipurpose Pins 7 MP pins: DMIC, PDM out, mute, volume, bank switch
PDM Output Stereo PDM output for external Class-D amplifier
Package 40-Lead LFCSP (6mm x 6mm with exposed pad)
Operating Temperature -40 degrees C to +85 degrees C

Features

  • Complete low-power codec + DSP solution for headsets
  • 38 microsecond analog-to-analog latency – ideal for ANC
  • 4-channel 24-bit ADC: 102 dB SNR A-weighted
  • 2-channel 24-bit DAC with headphone driver: 107 dB SNR
  • Programmable audio processing engine at up to 192 kHz
  • Full-duplex asynchronous sample rate converters (ASRCs)
  • Four single-ended analog inputs: mic or line configurable
  • Dual stereo digital microphone (PDM) inputs
  • Stereo analog output: single-ended or differential, line or headphone
  • Stereo PDM output for external digital amplifier
  • PLL accepts 8 MHz to 27 MHz input clock
  • Low power: 15 mW for typical ANC solution
  • I2C and SPI control interfaces
  • Self-boot from I2C EEPROM – standalone operation
  • 7 multipurpose pins: volume control, mute, DSP bypass, bank switching
  • Push-button volume control support
  • Limiter and compression for speaker protection
  • DSP bypass mode for pass-through operation
  • Compact 40-lead LFCSP 6x6mm package with exposed pad
  • Programmable via SigmaStudio graphical tool
  • RoHS compliant

Applications

  • Active noise cancelling (ANC) headsets and headphones
  • Bluetooth ANC headsets and wireless headphones
  • Wired and wireless headset audio processing
  • Personal navigation devices audio
  • Digital still and video camera audio
  • USB headsets and audio adapters
  • Gaming headsets with 3D audio processing
  • Hearing aid and personal sound amplification products
  • Communication headsets and call center equipment
  • Portable media players and smartphone accessories
Product Introduction: ADAU1772BCPZ Product Introduction

The ADAU1772BCPZ is a highly integrated low-power audio codec with built-in digital signal processor, specifically optimized for active noise-cancelling (ANC) headset applications. This single-chip solution combines four 24-bit analog-to-digital converters, two 24-bit digital-to-analog converters, a programmable DSP core, headphone driver, and comprehensive control interfaces into a compact 6x6mm LFCSP package. The key differentiator of the ADAU1772 is its ultra-low 38 microsecond analog-to-analog latency, which is critical for effective active noise cancellation where the anti-noise signal must be generated and output before the acoustic noise changes significantly. The ADC path achieves 102 dB SNR (A-weighted) including the programmable gain amplifier (PGA), while the combined DAC and headphone output path delivers 107 dB SNR. Both ADCs and DACs operate at 24-bit resolution with sampling rates from 8 kHz to 192 kHz. The integrated DSP executes audio processing algorithms including biquad filters, limiters, volume controls, and mixing, all programmable through the SigmaStudio graphical development environment. Full-duplex asynchronous sample rate converters (ASRCs) allow the codec to operate at different sample rates on the input and output sides, and also simplify synchronization with external digital audio sources. For input flexibility, the device provides four single-ended analog inputs configurable as either microphone inputs or line inputs, plus dual stereo digital microphone (PDM) inputs for MEMS microphones. On the output side, the stereo output can be configured as single-ended or differential, and as either a line output or headphone driver. A stereo PDM output is also available for driving external digital input amplifiers. The on-chip PLL supports input clock frequencies from 8 MHz to 27 MHz, providing flexibility for system clock selection. The ADAU1772 can operate in self-boot mode from an I2C EEPROM, enabling completely standalone headset designs without a microcontroller. Seven multipurpose pins support functions such as push-button volume control, mute, DSP bypass, parameter bank switching, and digital microphone I/O. With total power consumption of just 15 mW for a typical noise-cancelling configuration, the ADAU1772BCPZ is ideal for battery-powered wireless and wired headset applications.

Working Principle: ADAU1772BCPZ Working Principle

The ADAU1772 integrates a complete audio signal chain from analog microphone input to headphone output, with digital signal processing in between. For active noise cancellation applications, ambient noise is picked up by microphones (analog or digital MEMS), converted to digital by the ADCs, processed through the DSP core to generate anti-noise signals, mixed with the desired audio, and converted back to analog for the headphone drivers. The ultra-low latency of 38 microseconds is achieved by optimizing the entire signal path for speed, using minimum-phase filters and short filter lengths where possible. The 38 microsecond total includes the ADC conversion time, DSP processing time, and DAC conversion time – all of which are carefully minimized in the design. The DSP core executes audio processing algorithms at up to 192 kHz sample rate, with a set of building blocks including biquad (IIR) filters for equalization, dynamic range compressors/limiters for speaker protection and level control, mixers for signal combining, and volume controls. These are configured graphically in SigmaStudio, which compiles the signal flow diagram into DSP code that is downloaded to the device. The asynchronous sample rate converters (ASRCs) serve two purposes: they allow the serial digital audio port to operate at a different sample rate than the internal DSP processing, and they provide jitter attenuation for incoming digital audio signals. For power efficiency, the device uses multiple power domains with different supply voltages: 1.1V-1.8V for the DSP core, and 1.8V-3.3V for analog and I/O circuits. On-board regulators generate the required voltages from a single supply, reducing external components. The self-boot mode reads program and parameter data from an external I2C EEPROM during power-up initialization, allowing the device to operate independently without a host microcontroller. Parameters can be dynamically controlled through the multipurpose pins (for functions like volume up/down, mute, preset selection) or through the I2C/SPI control interface when a host processor is present.

Pin Description: ADAU1772BCPZ Pin Definition and Functions
Pin Group Description
Analog Inputs 4 single-ended inputs: IN0L, IN0R, IN1L, IN1R – configurable as mic or line input
Microphone Bias MICBIAS0, MICBIAS1 – bias voltage outputs for electret microphones
Analog Outputs OUTL, OUTR – stereo output, configurable as single-ended or differential, line or headphone
Digital Mic Inputs DMIC0/DMIC1, DMIC2/DMIC3 – two stereo PDM digital microphone inputs
PDM Output PDMOUT – stereo PDM output for external digital amplifier
Serial Audio Port SDATA_IN, SDATA_OUT, BCLK, LRCLK – I2S/TDM serial digital audio I/O
Control Interface SDA/SDIO, SCL/SCLK, CLATCH – I2C or SPI control port
Multipurpose Pins MP0-MP6 – 7 multi-function pins: volume controls, mute, GPIO, bank switch
Clock & PLL XTALI, XTALO – crystal oscillator; CLKOUT – buffered clock output
Reset RSTB – active-low reset input
Power Supplies AVDD (analog 1.8-3.3V), IOVDD (I/O 1.8-3.3V), DVDD (digital core), CPVDD (charge pump)
Ground AGND, DGND – analog and digital ground; connect to exposed pad
Exposed Pad EP – thermal pad, must connect to ground on PCB for heat dissipation
Application Scenarios: In which products and applications is ADAU1772BCPZ used
  • Active noise-cancelling (ANC) wired and wireless headsets
  • Bluetooth ANC headphones and true wireless earbuds (with Bluetooth SoC)
  • Gaming headsets with 3D audio processing and microphone processing
  • Communication headsets for call centers and office use
  • USB-C headsets and USB audio adapters
  • Personal navigation device audio subsystems
  • Digital camera and camcorder audio processing
  • Hearing aid personal sound amplification products (PSAPs)
  • Smartphone audio accessories and adapter cables
  • Virtual reality (VR) and augmented reality (AR) headset audio
Alternative Models: What chips are recommended as replacements for ADAU1772BCPZ
Model Manufacturer Key Difference
ADAU1772BCPZ-RL Analog Devices Same device, tape and reel packaging (2500 per reel)
ADAU1761 Analog Devices SigmaDSP + codec, 2ADC/4DAC, more DSP memory, lower power, 28-LFCSP
ADAU1781 Analog Devices Low power audio codec with Class-D amp, designed for headsets
CS47L24 Cirrus Logic Smart codec with DSP, ANC headphone, similar application
TAS2770 Texas Instruments Speaker amplifier with DSP, different focus (speaker vs. headphone)

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1