Opens in a new tab

ADS1256IDBR

24-bit 8-channel delta-sigma ADC, PGA 1-64x, 2.5-30kSPS, 27nV noise, ±0.001% INL, chopper-stabilized buffer, SPI, 28-SSOP, TI ADS1256.

4500

Effective Inventory

Image for reference only

Manufacturer Part:

ADS1256IDBR

Package:

28-Lead SSOP

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The ADS1256IDBR is a very low-noise, 24-bit delta-sigma analog-to-digital converter (ADC) from Texas Instruments Burr-Brown product line, featuring a 4-channel differential / 8-channel single-ended input multiplexer, a very low-noise programmable gain amplifier (PGA), and a programmable digital filter. The device offers up to 23 bits of noise-free resolution at low data rates and supports data rates up to 30 kSPS with single-cycle settling. The chopper-stabilized input buffer and low-noise PGA achieve 27 nV of input-referred noise. With excellent integral nonlinearity of only ±0.0010% (FSR maximum) and outstanding DC accuracy, the ADS1256 is ideal for high-resolution measurement applications including weigh scales, scientific instruments, industrial process control, and medical equipment. The device includes flexible power-down modes consuming as little as 0.4 mW in standby. The ADS1256IDBR is packaged in a 28-lead SSOP and operates over the full industrial temperature range of -40C to +85C.

Key Specifications

Parameter Conditions Min Typ Max Unit
Resolution No missing codes, all rates — 24 — Bits
Noise-Free Resolution 2.5 SPS, PGA=1 — 23 — Bits
Number of Inputs 4 differential / 8 single-ended 8 analog inputs (MUX) —
Architecture Delta-sigma (ΔΣ) 4th-order modulator + programmable sinc filter —
Data Output Rate Programmable 2.5 — 30000 SPS
PGA Gain Range Binary stepped 1 — 64 V/V
Input-Referred Noise PGA=64, 2.5 SPS — 27 — nV
INL (Integral Nonlinearity) End-point fit, PGA=1 — — ±0.0010 %FSR
Offset Error Self-calibrated — ±0.5 ±5 µV
Offset Drift — — 20 — nV/C
Gain Error Self-calibrated — 0.002 0.02 %
Gain Drift — — 0.5 — ppm/C
Common-Mode Rejection DC, all gain settings 100 130 — dB
Analog Supply (AVDD) — — 5.0 — V
Digital Supply (DVDD) — 1.8 — 3.6 V
Power Dissipation (Normal) 30kSPS, buffer off — 38 50 mW
Power Dissipation (Standby) Standby mode — 0.4 — mW
Input Buffer Chopper-stabilized User selectable (on/off) —
Reference Input Differential 0.1 V to AVDD V
Interface SPI-compatible, 5V tolerant 4-wire SPI with 5V tolerant digital inputs —
CLK Input External clock 7.68 MHz typical (1-10 MHz range) MHz
Package 28-Lead SSOP (DB, 10.2mm x 5.3mm) —
Operating Temperature Industrial -40 — +85 degrees C

Features

  • 24-bit resolution, no missing codes at all data rates and gain settings
  • Up to 23 bits noise-free resolution
  • ±0.0010% maximum integral nonlinearity
  • Data output rates: 2.5 SPS to 30 kSPS
  • Flexible input multiplexer with sensor detect:
  • – 4 differential / 8 single-ended input channels
  • – Integrated sensor detection current sources
  • Chopper-stabilized input buffer
  • Very low noise PGA: 27 nV input-referred noise
  • PGA gain: 1 to 64 (binary steps)
  • Single-cycle settling (new conversion after channel or gain change)
  • 5V tolerant SPI-compatible serial interface
  • Analog supply: 5V (typical)
  • Digital supply: 1.8V to 3.6V
  • Low power dissipation:
  • – Normal mode: 38 mW typical low-power mode
  • – Standby mode: 0.4 mW
  • Self-calibration and system calibration
  • Internal temperature sensor
  • 7.68 MHz external clock (typical)
  • 28-lead SSOP and 28-lead SOIC package options
  • Industrial temperature range: -40C to +85C
  • Pin-compatible with ADS1255 (single channel)

Applications

  • Weigh scales and precision weight measurement
  • Scientific instruments and laboratory equipment
  • Industrial process control and automation
  • Medical equipment and patient monitoring
  • Test and measurement instrumentation
  • Strain gauge and load cell signal conditioning
  • Pressure transmitters and flow meters
  • High-resolution data acquisition systems
  • Seismic monitoring and geophysical instruments
  • \li>Precision temperature measurement with RTDs

Product Introduction: ADS1256IDBR Product Introduction

The ADS1256IDBR is a high-performance 24-bit delta-sigma analog-to-digital converter from Texas Instruments, designed for the most demanding precision measurement applications. With its combination of ultra-low noise (27 nV input-referred), exceptional linearity (±0.0010% FSR maximum), and up to 23 bits of noise-free resolution, the ADS1256 sets the benchmark for integrated delta-sigma ADC performance. The device features an 8-channel input multiplexer that can be configured as four differential inputs or eight single-ended inputs, along with integrated sensor detection current sources for detecting open or shorted sensor connections. A chopper-stabilized input buffer provides very high input impedance, enabling direct connection to high-impedance sensors without signal attenuation. The programmable gain amplifier offers gains from 1 to 64, allowing the device to handle both volt-level signals and microvolt-level sensor outputs with high resolution. The fourth-order delta-sigma modulator is followed by a programmable sinc digital filter that provides data rates from 2.5 SPS to 30 kSPS. A key advantage is single-cycle settling: after switching channels or changing gain, the next output sample already has full accuracy, eliminating the need to discard multiple settling samples in multiplexed applications. The ADS1256 includes comprehensive calibration capabilities including self-calibration (offset and gain) and system calibration to remove errors from the entire signal chain. The device operates from a 5V analog supply and 1.8V to 3.6V digital supply, with separate digital I/O that is 5V tolerant for easy interfacing to 3.3V or 5V microcontrollers. Communication is through a 4-wire SPI-compatible serial interface. The ADS1256IDBR is packaged in a 28-lead SSOP (shrink small-outline package) with tape and reel packaging, and is specified over the industrial temperature range of -40C to +85C. For single-channel applications, the pin-compatible ADS1255 offers the same performance in a smaller 20-pin package.

Working Principle: ADS1256IDBR Working Principle

The ADS1256 uses a fourth-order delta-sigma modulator architecture to achieve its exceptional 24-bit resolution and noise performance. The analog input signal passes through an input multiplexer that selects one of eight analog inputs, which can be configured as either single-ended (referenced to AGND) or differential (pairs of inputs). The selected signal then passes through an optional chopper-stabilized input buffer, which provides very high input impedance while minimizing input bias current and offset voltage drift through chopper stabilization techniques. After the buffer, the signal is amplified by the programmable gain amplifier, which can be set to gains of 1, 2, 4, 8, 16, 32, or 64. The PGA is designed for very low noise, contributing only 27 nV of input-referred noise at the highest gain setting. The amplified signal is then fed to the fourth-order delta-sigma modulator, which samples the input at a very high rate (determined by the 7.68 MHz external clock divided down) and produces a high-speed bitstream. The fourth-order modulator provides aggressive noise shaping, pushing most of the quantization noise to frequencies far above the signal band. Following the modulator is a programmable digital decimation filter (sinc filter) that converts the high-rate bitstream into 24-bit output samples at the programmed data rate. The filter order and decimation ratio determine the data rate and noise performance: lower data rates provide more filtering and therefore better noise resolution, while higher rates allow faster measurements. The filter is designed so that full accuracy is achieved on the very first sample after a channel or gain change (single-cycle settling), which is critical for multiplexed systems. The device includes self-calibration circuitry that can automatically measure and correct for offset and gain errors. System calibration allows the user to calibrate out errors from the entire signal chain (including external components). Sensor detect current sources can be enabled to verify that sensors are properly connected by sourcing or sinking small currents and checking the resulting voltage. An internal temperature sensor provides die temperature monitoring for compensation purposes.

Pin Description: ADS1256IDBR Pin Definition and Functions
Pin No. Name Type Description
1 AVDD Analog supply Analog power supply (5V nominal).
2-9 AIN0-AIN7 Analog inputs Analog input channels 0 through 7. Can be configured as 8 single-ended or 4 differential inputs.
10 AGND Ground Analog ground.
11 AGND Ground Analog ground.
12 XTAL1/CLKIN Input Crystal oscillator input or external clock input (7.68 MHz typical).
13 XTAL2 Output Crystal oscillator output. Leave floating if using external clock.
14 CLKO Output Clock output (buffered oscillator output). Can be disabled for low noise.
15 PDWN Digital input Power-down control (active low). Enters power-down mode when low.
16 DGND Ground Digital ground.
17 DVDD Digital supply Digital power supply (1.8V to 3.6V).
18 CS Digital input Chip select (active low) for SPI interface.
19 DOUT Digital output Serial data output for SPI communication.
20 DIN Digital input Serial data input for SPI communication (5V tolerant).
21 SCLK Digital input Serial clock input for SPI interface (5V tolerant).
22 DRDY Digital output Data ready. Goes low when conversion data is ready to be read.
23 SYNC Digital input Synchronization input (active low). Resets the digital filter.
24 VREFN Analog input Negative reference voltage input.
25 VREFP Analog input Positive reference voltage input.
26-28 NC — No internal connection. Do not connect externally.
Application Scenarios: In which products and applications is ADS1256IDBR used
  • High-precision weigh scales and load cell measurement
  • Scientific and laboratory instrumentation requiring nanovolt sensitivity
  • Industrial process control and high-accuracy PLC analog modules
  • Medical diagnostic equipment and patient monitoring
  • Test and measurement: precision multimeters, source measure units
  • Strain gauge, force, and pressure measurement
  • Flow measurement and mass flow controllers
  • High-resolution data acquisition systems
  • Seismic monitoring and geophysical exploration equipment
  • Precision temperature measurement with platinum RTDs
Alternative Models: What chips are recommended as replacements for ADS1256IDBR
Model Manufacturer Key Difference
ADS1255IDBR Texas Instruments Single-channel version (no MUX), 20-SSOP, same performance, pin-compatible subset
ADS1256IDB Texas Instruments Tube packaging version of same device (not tape & reel)
ADS1146 Texas Instruments 16-bit with integrated PGA and reference, lower cost, different feature set
AD7767 Analog Devices 24-bit sigma-delta ADC, higher speed option, ADI alternative
LTC2440 ADI / Linear Tech 24-bit delta-sigma with selectable speed, very low noise, no PGA

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1