Opens in a new tab

AS1138

30W PoE PD + DC-DC controller, IEEE 802.3af/at Type1/Type2, 2-event classification, integrated surge protection, current-mode PWM, 80-500kHz, flyback/forward/buck, Akros Silicon AS1138.

2800

Effective Inventory

Image for reference only

Manufacturer Part:

AS1138

Package:

SOIC-20 / SOP-20

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The AS1138 is a single-chip, highly integrated CMOS solution for Power over Ethernet (PoE) Powered Devices (PD) requiring input power of up to 30 Watts. Manufactured by Akros Silicon, the AS1138 fully supports both IEEE 802.3af-2005 (Type 1, 13W) and IEEE 802.3at-2009 (Type 2, 25.5W/30W) power requirements. The device integrates a complete PoE PD interface — including detection signature, classification, inrush current control, over-current protection, and integrated surge protection — along with a flexible current-mode DC-DC controller that can be configured for flyback, forward, or buck topologies. The AS1138 features robust 2-event classification detection with proprietary digital filtering to prevent false Type 2 PSE detection from line noise. On-chip surge protection provides faster response to surge events and minimizes stray surge current through sensitive circuits such as the Ethernet PHY. The DC-DC controller offers a wide programmable switching frequency range from 80kHz to 500kHz with an external resistor, supporting various power supply design requirements. The AS1138 is ideal for VoIP phones, wireless access points, IP cameras, and other high-power PoE applications.

Key Specifications

Parameter Conditions Min Typ Max Unit
PoE Standard IEEE 802.3af / 802.3at
PD Type Type 1 (13W) & Type 2 (30W)
Input Voltage Range Operating (Type 1) 37 48 57 V
Input Voltage Range Operating (Type 2) 42.5 48 57 V
UVLO Rising Threshold 37 38 42 V
UVLO Falling Threshold 30 32 34 V
Detection Signature Voltage Max 10.1 12.5 13 V
Classification Voltage Range 14.5 22 20.5 to 24 V
Mark Event Voltage Range 6.9 12.5 13 V
Mark Event Current 0.25 4 mA
Inrush Current (Type 1) 50 150 200 mA
Inrush Current (Type 2) 100 295 350 mA
Operating Current Limit (Type 1) 350 400 500 mA
Operating Current Limit (Type 2) 720 800 925 mA
Switch On Resistance 350mA 0.8 1 Ω
DC-DC Controller Type Current-mode PWM
Switching Frequency Programmable 80 100/225/350 500 kHz
Topology Support Flyback, Forward, Buck
2-Event Classification Yes, with digital filtering
AT Detection Output ATDET pin, Type 2 PSE detected
Surge Protection On-chip Integrated surge clamp
System ESD (RJ-45) IEC 61000-4-2 8kV contact / 15kV air
High-Voltage Pins Steady-state 80 V
Low-Voltage Pins 6 V
5V Regulator Output VDD5 pin, 5V output
Operating Temperature -40 +85 °C
Junction Temperature Max 150 °C
Package SOIC-20 / SOP-20

Features

  • Full IEEE 802.3af-2005 and 802.3at-2009 compliance
  • Supports both Type 1 (13W) and Type 2 (30W) PD modes
  • 2-event classification for 802.3at higher power PDs
  • Robust Type 2 PSE detector with proprietary digital filtering
  • Eliminates false positives from line noise transients
  • Programmable classification current via external resistor
  • Class 0 through Class 4 support
  • Integrated inrush current control
  • Integrated over-current protection
  • Integrated surge protection (IEC 61000-4-2/3/4/5/6)
  • 8kV contact / 15kV air system-level ESD at RJ-45
  • Integrated current-mode DC-DC controller
  • Programmable switching frequency: 80kHz to 500kHz
  • Supports flyback, forward, and buck topologies
  • Low component count and minimal BOM cost
  • Small form factor design
  • Internal 5V LDO regulator output
  • ATDET pin indicates Type 2 PSE connection
  • RoHS compliant
  • -40°C to +85°C operating temperature
  • Applications

    • VoIP phones and IP phones
    • Wireless access points (WAP)
    • IP cameras and security cameras
    • IP-based PTZ cameras
    • Powered speakers and IP audio devices
    • Industrial Ethernet devices
    • PoE lighting systems
    • Point of Sale (POS) terminals
    • Network switches with PoE PD ports
    • Thin clients and zero clients
    • Access control and door entry systems
    • RFID readers
    Product Introduction: AS1138 Product Introduction

    The AS1138 is a highly integrated single-chip PoE Powered Device (PD) interface and DC-DC controller from Akros Silicon, designed for Power over Ethernet applications requiring up to 30 Watts of input power. The device fully complies with both IEEE 802.3af (Type 1, up to 13W) and 802.3at (Type 2, up to 25.5W/30W) standards, providing a complete PD front-end solution in a single package. The AS1138 integrates all required PoE PD functions including detection signature, classification with programmable current, 2-event classification for Type 2 PD identification, inrush current limiting, over-current protection, under-voltage lockout (UVLO), and an integrated pass FET. A key differentiator is the robust Type 2 PSE detector with proprietary digital filtering that prevents false 2-event classification detection caused by line noise or transient ringing, ensuring reliable AT detection. The device also integrates on-chip surge protection circuitry that provides faster response to surge events and limits stray surge current from passing through sensitive circuits like the Ethernet PHY, contributing to system-level compliance with IEC 61000-4-2/3/4/5/6 EMC requirements. Additionally, the AS1138 integrates a flexible current-mode DC-DC controller that can be configured for flyback, forward, or buck converter topologies, with programmable switching frequency from 80kHz to 500kHz via an external resistor on the FSEL pin. The ATDET output pin indicates whether the connected PSE is Type 1 or Type 2, allowing the system to adjust power consumption accordingly. An internal 5V regulator provides a low-voltage supply for external circuits. The AS1138 is ideal for high-power PoE applications including VoIP phones, wireless access points, IP cameras, PTZ cameras, and other network-powered devices.

    Working Principle: AS1138 Working Principle

    The AS1138 operates through several sequential phases as specified by the IEEE 802.3 PoE standard: 1) Detection phase: When the cable is first connected, the PSE applies a low voltage (2.7V to 10.1V) to detect a valid PD signature resistance. The AS1138 presents the correct 25kΩ signature resistance to the PSE. 2) Classification phase: If the PSE supports classification, it raises the voltage to the classification range (14.5V to 20.5V for single-event, or with Mark events for 2-event). The AS1138 sinks a classification current proportional to the RCLASS resistor, indicating the requested power class (Class 0-4). For Type 2 PDs, the AS1138 uses 2-event classification to signal higher power capability. The ATDET pin indicates whether the PSE is Type 1 or Type 2. 3) Inrush phase: When the PSE applies full voltage (above UVLO rising threshold of ~38V), the AS1138 controls the inrush current to charge the input capacitor while staying within limits (150mA typ for Type 1, 295mA typ for Type 2). 4) Operating phase: Once inrush is complete and the DC-DC converter starts, the device provides over-current protection and regulates power delivery. The integrated DC-DC controller operates in current-mode with programmable frequency, driving an external MOSFET via the NDRV pin. Feedback from the output is provided through the FB and COMP pins for loop compensation. The CS pin provides current sensing for current-mode control and over-current protection. On-chip surge protection clamps transient voltages, protecting the device and downstream circuitry from ESD and surge events at the RJ-45 interface.

    Pin Description: AS1138 Pin Definition and Functions
    Pin No. Name Description
    1 —
    2 VDD48I 48V input positive (high voltage side)
    4 VDD48O 48V output to DC-DC (through pass FET)
    5 VDD5 5V regulated output from internal LDO
    8 VDD5 5V pin (additional)
    9 RCURR Current limit programming resistor (Type 1/2 select)
    10 RCLASS Classification current programming resistor
    11 LVMODE Low-voltage mode selection
    12 FB DC-DC controller feedback input
    13 COMP Error amplifier compensation pin
    14 CSS Soft-start capacitor
    15 CS Current sense input for DC-DC controller
    16 NDRV Gate drive output for external NMOS
    17 VBN Bootstrap / floating supply for gate driver
    18 FSEL Switching frequency selection resistor
    19 ATDET Type 2 PSE detection output (high = Type 2)
    20 —

    Note: Pin numbering is approximate. Refer to the official AS1138 datasheet from Akros Silicon for precise pin assignments and electrical specifications.

    Application Scenarios: In which products and applications is AS1138 used
    • VoIP phones and IP telephone systems
    • Wireless access points (Wi-Fi APs)
    • IP security cameras and surveillance cameras
    • PTZ (Pan-Tilt-Zoom) IP cameras
    • PoE-powered IP speakers and audio systems
    • Industrial Ethernet devices and sensors
    • PoE LED lighting systems
    • Point of Sale (POS) terminals with PoE
    • Network switches with PD uplink ports
    • Thin clients and zero clients
    • Access control systems and door readers
    • RFID readers and IoT gateways
    Alternative Models: What chips are recommended as replacements for AS1138
    Model Manufacturer Key Difference
    AS1130 Akros Silicon 13W (802.3af) PoE PD, lower power
    AS1135 Akros Silicon PoE PD + DC-DC, different power level
    TPS23753A Texas Instruments PoE PD interface + DC-DC controller, TI alternative
    LTC4267 Analog Devices PoE PD with integrated DC-DC, ADI alternative
    MAX5969B Maxim Integrated PoE PD controller, alternative

    Recommend Parts

    ISO1176TDWR

    Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

    Brand: TI

    Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

    IN STOCK: 6874pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    IRFB4020PBF

    200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

    Brand: infineon

    Package: TO-220AB

    IN STOCK: 14149pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    NRF52832-QFAA-T

    Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

    Package: See datasheet

    IN STOCK: 10958pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    UCC28740DR

    CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

    Brand: TI

    Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

    IN STOCK: 4840pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    MMUN2211LT1G

    NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

    Brand: Onsemi

    Package: SOT-23-3 (TO-236, SC-59)

    IN STOCK: 8500pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    TMS320F2810PBKA

    C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

    Brand: TI

    Package: BGA-179 (16 x 16 mm, PBK package)

    IN STOCK: 3124pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1