Opens in a new tab

EE-SY199

Ultra-compact reflective photomicrosensor with 1 mm sensing distance for object presence and position detection.

20659

Effective Inventory

Image for reference only

Manufacturer Part:

EE-SY199

Package:

1206 (3216 Metric) – 3.2 x 1.7 x 1.1 mm

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

The EE-SY199 by Omron is an ultra-compact reflective photomicrosensor integrating a 950 nm IRED emitter and a phototransistor detector in a 1206 (3.2 x 1.7 x 1.1 mm) surface-mount package. It provides a standard sensing distance of 1 mm with a light current of 40-130 uA (typ. 85 uA at IF = 4 mA, VCE = 2 V), dark current of 1 nA typ., and response time of 20 us typ. Key ratings include VCEO = 35 V, max collector current 20 mA, max forward current 50 mA, and total allowable loss 100 mW. The device operates from -25 to +85 C with a PPS housing rated for 260 C reflow soldering. The 4-pin SMD package (Anode, Cathode, Emitter, Collector) requires no external optical components, enabling minimal PCB footprint designs.

Target applications include paper detection in printers, card insertion sensing, object position detection, rotation speed measurement, and media presence sensing in consumer appliances. The product is Active (In Production), RoHS3 compliant, REACH unaffected, and classified under ECCN EAR99. Variants include EE-SY199-1 (100 pcs/box for small lots) and EE-SY199-RANKB (photocurrent-sorted version with IL min 65 uA). DigiKey stock: 20,659 pcs. Standard packaging: 2,000 pcs/reel (Tape & Reel).

Product Introduction: EE-SY199 Product Introduction

The EE-SY199 is an ultra-compact reflective photomicrosensor manufactured by Omron Electronics (EMC Division). It integrates an infrared emitting diode (IRED) with a peak emission wavelength of 950 nm and a phototransistor detector with a peak spectral sensitivity of 930 nm into a single surface-mount package. The standard sensing distance is 1 mm, making it suitable for presence and position detection in tight spaces.

The emitter side has a maximum forward current of 50 mA with a typical forward voltage of 1.2 V (max 1.4 V at IF = 20 mA) and a maximum reverse voltage of 6 V. The detector side features a collector-emitter breakdown voltage of 35 V (VCEO), emitter-collector voltage of 6 V (VECO), maximum collector current of 20 mA, and collector dissipation of 75 mW. Total allowable loss is 100 mW.

Under standard test conditions (IF = 4 mA, VCE = 2 V, aluminum-deposited surface at d = 1 mm), the light current ranges from 40 uA (min) to 130 uA (max) with 85 uA typical. Dark current is typically 1 nA (max 100 nA at VCE = 20 V, 0 lx), and leakage current in the no-reflection state is max 500 nA. Response time is typically 20 us for both rise and fall times (max 100 us) at VCC = 2 V, RL = 1 kOhm.

The device is housed in a 1206 (3216 Metric) package measuring 3.2 x 1.7 x 1.1 mm with a Polyphenylene Sulfide (PPS) housing. It supports surface-mount reflow soldering with a peak temperature of 260 C. Operating temperature range is -25 to +85 C, storage temperature is -40 to +100 C. The product is RoHS3 compliant, REACH unaffected, and classified under ECCN EAR99. The product status is Active (In Production). Two variant models are available: EE-SY199-1 (100 pcs/box for small lots) and EE-SY199-RANKB (sorted by photocurrent).

Working Principle: EE-SY199 Working Principle

The EE-SY199 operates as a reflective optical sensor combining an infrared emitter and a phototransistor detector in a single package:

1. Infrared Emission: The emitter side contains an IRED (Infrared Emitting Diode) that emits near-infrared radiation at a peak wavelength of 950 nm when forward-biased through the Anode (A) and Cathode (K) pins. The typical forward voltage is 1.2 V at IF = 20 mA. The emitted IR beam is directed outward from the package surface toward the target detection area.

2. Reflective Detection: When an object is present within the sensing range (standard distance = 1 mm), the emitted IR light reflects off the object surface back toward the phototransistor detector inside the same package. The amount of reflected light depends on the reflectivity of the target surface, the distance to the target, and the emitter drive current.

3. Phototransistor Output: The detector side is a phototransistor with peak spectral sensitivity at 930 nm, closely matching the emitter wavelength for optimal coupling. Reflected IR light generates a base current in the phototransistor, which is amplified to produce a collector current (light current, IL). With IF = 4 mA and VCE = 2 V at d = 1 mm from an aluminum-deposited reference surface, the typical light current is 85 uA (range: 40-130 uA).

4. Signal Conditioning: The collector current flows through an external load resistor (RL), producing a voltage drop that can be read by a comparator or ADC to determine object presence/absence. With RL = 1 kOhm and VCC = 2 V, the rise and fall times are typically 20 us, enabling relatively high-speed detection.

5. Dark State: When no reflective object is present, only a very small dark current (typically 1 nA, max 100 nA) flows through the phototransistor, providing a high contrast ratio between the detected and undetected states.

6. Physical Integration: The emitter and detector are arranged side-by-side within the package with an internal light shield to prevent direct optical crosstalk. The center-to-center offset between the emitter and receiver elements, combined with the reflective geometry, defines the optimal sensing distance of 1 mm.

Pin Description: EE-SY199 Pin Definition and Functions
Pin Name Type Description
1 A (Anode) I IR LED anode; apply forward current (max 50 mA) to drive the emitter
2 K (Cathode) G IR LED cathode; connect to ground through current-limiting resistor
3 E (Emitter) O Phototransistor emitter; connect to ground through load resistor or directly to ground
4 C (Collector) O Phototransistor collector; output signal proportional to reflected light intensity (max IC = 20 mA)
Application Scenarios: In which products and applications is EE-SY199 used
Application Description
Paper Detection in Printers/Copiers Detects presence or absence of paper at 1 mm distance in printer paper feed paths; reflective method avoids physical contact with the media
Card Insertion Detection Senses insertion of IC cards, smart cards, or magnetic cards in card reader slots; compact 1206 footprint fits in narrow card guide channels
Object Position Sensing Detects presence and edge position of small mechanical parts on PCB assemblies in automated manufacturing and pick-and-place equipment
Rotation Speed Measurement Mounted opposite a rotating disk with reflective/non-reflective segments to measure motor speed and direction in small DC motor applications
Consumer Appliance Detection Door-open detection, tray-in detection, or media presence sensing in compact consumer electronics where board space is constrained
Alternative Models: What chips are recommended as replacements for EE-SY199
Model Manufacturer Compatibility Key Difference
EE-SY199-1 Omron Series Variant Same sensor, 100 pcs/box packaging for small lot orders (standard is 2000 pcs/reel)
EE-SY199-RANKB Omron Series Variant Same sensor with photocurrent sorting specification (IL min 65 uA); tighter tolerance for precision applications
EE-SY1201 Omron Series Sibling Reflective type with 3 mm focal distance via built-in lens; longer range but larger package
EE-SY169A Omron Series Sibling Reflective type with 4 mm standard sensing distance; larger form factor for less space-constrained designs
GP2S60 Sharp Competitive Alternative Reflective photointerrupter, similar 1 mm sensing distance, different package and pinout

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1