The AP1117E33G-13 from Diodes Incorporated is a 1-A low-dropout positive fixed-voltage linear regulator providing a 3.3-V output in a SOT-223-3 package. It features a maximum dropout voltage of 1.4 V at full 1-A load, input voltage range up to 18 V, output current limiting, built-in thermal shutdown, and good noise rejection with 60 dB PSRR at 180 Hz. The quiescent current is 10 mA typical. Designed for 3.3-V logic supply, high-speed bus termination, and PC peripheral applications. Note: this part is obsolete; substitutes such as AZ1117CH-3.3TRG1 are recommended for new designs.
Home » Integrated Circuits ICs, Low Dropout Regulators (LDO) » AP1117E33G-13
AP1117E33G-13
1A LDO, 3.3V fixed, 1.4V dropout, 18V max input, 10mA Iq, SOT-223-3, thermal shutdown, OBSOLETE
Effective Inventory
Manufacturer Part:
AP1117E33G-13
Package:
SOT-223-3 (TO-261-4, 6.5 x 3.5 x 1.6 mm)
Brand:
Product Categories:
Quality Commitment
Shipping & Payment
Service & Packaging
Product Manual
Other recommendations you may be interested in.
Description
Product Introduction: AP1117E33G-13 Product Introduction
The AP1117E33G-13 is a 1-A low-dropout positive linear regulator from Diodes Incorporated, configured for a fixed 3.3-V output. It belongs to the AP1117 family, which also offers fixed 1.5-V, 1.8-V, 2.5-V, and 5.0-V variants plus an adjustable version with a 1.25-V reference.
The device delivers up to 1 A of output current with a maximum dropout of 1.4 V at full load. The input voltage range extends to 18 V, making it suitable for stepping down from 5-V or higher rails to 3.3-V logic supplies. The output voltage accuracy is ±1% at 25°C.
Internal protection includes current limiting and thermal shutdown (activated at approximately 150°C junction), which protects the device under fault conditions without requiring external components. The 60 dB PSRR at 180 Hz provides adequate supply noise rejection for most digital logic loads.
The SOT-223-3 package features a tab connected to VOUT that serves as both an electrical contact and a thermal path. With a thermal resistance of 107°C/W junction-to-ambient (typical), the package can dissipate approximately 1.1 W at 25°C ambient without a heatsink, corresponding to about 780 mA at a 1.4-V dropout.
The E33G suffix denotes: E = SOT-223 package, 33 = 3.3-V fixed output, G = Green molding compound (no Br/Sb), -13 = tape and reel packaging. Note that this part is obsolete as of 2015; Diodes recommends the AZ1117CH-3.3TRG1 as a direct substitute with improved dropout voltage (1.1 V at 1 A) and wider temperature range (-40°C to +125°C).
Working Principle: AP1117E33G-13 Working Principle
**Series Pass Element:** The AP1117 uses a PNP pass transistor in a series regulator topology. Unlike NPN-based LDOs, the PNP structure allows dropout voltage to approach the VCE(sat) of the transistor, achieving 1.4 V at 1 A. The base drive current is the primary contributor to the 10-mA quiescent current, which flows from input to ground regardless of load.
**Error Amplifier and Reference:** A bandgap voltage reference sets the output at 3.3 V (fixed version). The error amplifier compares a divided sample of the output with the internal reference and drives the PNP pass transistor base to maintain regulation. The feedback loop is internally compensated, requiring only a 10-µF output capacitor with ESR between 0.15 Ω and 20 Ω for stability.
**Thermal and Current Protection:** The current limit circuit senses the pass transistor current and clamps the base drive when it exceeds approximately 1.5 A. The thermal shutdown sensor monitors junction temperature and disables the pass transistor when Tj exceeds approximately 150°C, re-enabling the output once the junction cools by the hysteresis margin.
Pin Description: AP1117E33G-13 Pin Definition and Functions
| Pin | Name | Type | Description |
|---|---|---|---|
| 1 | GND/ADJ | G | Ground for fixed-voltage versions; connects to resistor divider for adjustable version; tie directly to ground plane for AP1117-3.3 |
| 2 | VOUT | O | Regulated 3.3-V output; requires minimum 10µF output capacitor with 0.15-20Ω ESR for stability; connect to load and bypass capacitors |
| 3 | VIN | I | Unregulated input supply (up to 18V); must be at least 1.4V above VOUT at 1A load; connect input bypass capacitor (10µF+) close to pin |
| Tab | VOUT | O | Heat sink tab electrically connected to VOUT; solder to PCB copper pour for thermal dissipation; provides lowest-resistance thermal path |
Application Scenarios: In which products and applications is AP1117E33G-13 used
| Application | Description |
|---|---|
| 3.3V Logic Rail from 5V | Convert 5V USB or system supply to 3.3V for MCU/I/O logic; 1.7V headroom provides comfortable margin at 1A; SOT-223 footprint fits dense boards; 60dB PSRR rejects 5V supply ripple |
| PC Peripheral Power | Provide 3.3V rail from 5V or 12V supply in VGA cards, hard drives, and peripherals; thermal shutdown protects during enclosure overheating; low cost and simple 3-pin design |
| Battery-Powered 3.3V System | Regulate 4.5-9V battery pack to 3.3V; dropout voltage allows operation down to ~4.7V input; thermal shutdown protects during extended high-load operation; note 10mA Iq is not ideal for ultra-low-power designs |
Alternative Models: What chips are recommended as replacements for AP1117E33G-13
| Model | Manufacturer | Compatibility | Key Difference |
|---|---|---|---|
| AZ1117CH-3.3TRG1 | Diodes Inc | Pin-Compatible Direct Sub | Same SOT-223 pinout; 1.1V dropout (vs 1.4V); -40~125°C (vs 0~125°C); actively produced; recommended replacement for new designs |
| AMS1117-3.3 | Advanced Monolithic Systems | Pin-Compatible | Same SOT-223 pinout; 1.1V dropout; 15V max input; very popular low-cost clone; widely available |
| NCP1117ST33T3G | onsemi | Pin-Compatible | SOT-223; 1.3V dropout; 20V max input; active status; -40~125°C; good second-source option |
| TLV1117LV33DCYR | TI | Functional Upgrade | SOT-223; 1.05V dropout; 5.5V max input only; lower Iq (500µA); not pin-compatible drop-in; use for 5V-to-3.3V only |
Recommend Parts

ISO1176TDWR
Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16
Brand: TI
Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)
IN STOCK: 6874pcs
Cargo cycle: 3-7 Days
The minimum order is 1

IRFB4020PBF
200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB
Brand: infineon
Package: TO-220AB
IN STOCK: 14149pcs
Cargo cycle: 3-7 Days
The minimum order is 1

NRF52832-QFAA-T
Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48
Brand: Nordic Semiconductor
Package: See datasheet
IN STOCK: 10958pcs
Cargo cycle: 3-7 Days
The minimum order is 1

UCC28740DR
CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7
Brand: TI
Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)
IN STOCK: 4840pcs
Cargo cycle: 3-7 Days
The minimum order is 1

MMUN2211LT1G
NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch
Brand: Onsemi
Package: SOT-23-3 (TO-236, SC-59)
IN STOCK: 8500pcs
Cargo cycle: 3-7 Days
The minimum order is 1

TMS320F2810PBKA
C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179
Brand: TI
Package: BGA-179 (16 x 16 mm, PBK package)
IN STOCK: 3124pcs
Cargo cycle: 3-7 Days
The minimum order is 1






