Opens in a new tab

DFLT30A-7

30V uni-directional TVS, 225W Ppp, 48.4V clamp@4.65A, 33.3-36.8V VBR, PowerDI 123, AEC-Q101

4734

Effective Inventory

Image for reference only

Manufacturer Part:

DFLT30A-7

Package:

PowerDI 123 (3.7 x 2.8 x 1.78 mm, 2-pin, SMD)

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

The DFLT30A-7 from Diodes Incorporated is a 225 W unidirectional TVS diode in a PowerDI 123 package. It features 30 V reverse standoff voltage (VRWM), 33.3-36.8 V breakdown voltage, 48.4 V maximum clamping voltage at 4.65 A peak pulse current, 1 uA maximum reverse leakage, and 1 W steady-state power dissipation. AEC-Q101 qualified. Operating temperature range is -65C to +150C. The -7 suffix denotes 3000-unit tape-and-reel packaging.

Product Introduction: DFLT30A-7 Product Introduction

The DFLT30A-7 from Diodes Incorporated is a unidirectional transient voltage suppressor (TVS) diode in the compact PowerDI 123 surface-mount package. It is part of the DFLT series covering standoff voltages from 5.0 V to 51 V, providing scalable protection across common system voltages.

The DFLT30A provides 30 V reverse standoff voltage (VRWM), making it suitable for protecting 24 V nominal rails (24 V + 25% tolerance = 30 V maximum). The 33.3 V minimum breakdown voltage ensures the TVS does not conduct during normal operation, while the 36.8 V maximum breakdown guarantees it starts clamping before the protected circuitry is damaged.

Under a transient event (IEC 61000-4-5 8/20 us or 10/1000 us waveform), the device clamps at a maximum of 48.4 V at 4.65 A peak pulse current. This clamping voltage provides the protection margin that determines whether the downstream IC survives the transient.

The PowerDI 123 package achieves a very low 6C/W junction-to-soldering-point thermal resistance, enabling efficient heat transfer during surge events. The package is rated for 225 W peak pulse power on a 10/1000 us waveform and 1125 W on an 8/20 us waveform. The 1 W steady-state DC power dissipation allows the device to handle continuous reverse power without thermal runaway.

The DFLT30A-7 is AEC-Q101 qualified for automotive applications and uses green molding compound (no bromine, no antimony). The -7 suffix indicates tape-and-reel packaging with 3000 units per reel. The marking code for DFLT30A is not specified in the available data sheet excerpt.

Working Principle: DFLT30A-7 Working Principle

**Avalanche TVS Operation:** The DFLT30A uses an avalanche (Zener) junction designed to handle high transient power. In normal operation (voltage below VRWM = 30 V), the TVS draws only leakage current (1 uA max). When a transient exceeds the breakdown voltage (VBR = 33.3-36.8 V), the junction avalanches and clamps the voltage.

**Clamping Mechanism:** During an avalanche event, the TVS presents a low dynamic impedance, holding the voltage close to VBR for moderate currents. At the rated peak pulse current (IPP = 4.65 A), the clamping voltage rises to VC = 48.4 V maximum due to the device’s dynamic resistance. Lower surge currents result in lower clamping voltages.

**Unidirectional Configuration:** The DFLT30A is unidirectional, meaning it clamps only positive transients (with respect to the cathode). For negative transients, the internal diode forward-biases and clamps at approximately 3.5 V at 12 A. Bidirectional protection requires two devices in back-to-back configuration or a bidirectional TVS.

**PowerDI 123 Thermal Advantage:** The PowerDI 123 package features a large cathode tab that solders directly to the PCB copper pour. With RthJS of only 6C/W, heat from the avalanche event transfers quickly to the PCB, reducing peak junction temperature and improving surge survival. This thermal advantage enables the 225 W peak pulse power rating in a package smaller than SMA/SMB.

Pin Description: DFLT30A-7 Pin Definition and Functions
Pin Name Type Description
1 Anode I Anode; connect to protected line or ground depending on configuration; cathode band on package indicates cathode end; current flows from anode to cathode in forward direction
2 Cathode O Cathode; large tab for thermal dissipation; connect to protected line (cathode toward positive rail) or to VCC rail; solder tab to copper pour with thermal vias for optimal surge performance
Application Scenarios: In which products and applications is DFLT30A-7 used
Application Description
24V Industrial Bus Protection Protect 24V nominal rails (24V +25% = 30V VRWM); 33.3V min VBR stays off during normal 24-30V operation; 48.4V clamp limits transient seen by downstream IC; AEC-Q101 for industrial/automotive; PowerDI123 handles repeated surges
Automotive Load Dump Protection Protect automotive ECU power inputs from load dump and ISO 7637 pulses; 30V VRWM covers 12V/24V battery systems with tolerance; 225W Ppp on 10/1000us waveform handles typical automotive transients; pair with series resistor for higher energy events
Alternative Models: What chips are recommended as replacements for DFLT30A-7
Model Manufacturer Compatibility Key Difference
DFLT26A-7 Diodes Inc Lower Voltage Variant 26V VRWM; 28.9-32.0V VBR; 42.1V clamp; same PowerDI 123; use for 24V rails with tighter tolerance
DFLT33A-7 Diodes Inc Higher Voltage Variant 33V VRWM; 36.6-40.5V VBR; 53.3V clamp; same PowerDI 123; use for 28V/30V rails
SMAJ30A Littelfuse Package Alternative 30V VRWM; 33.3-36.8V VBR; 48.4V clamp; SMA package (larger); same electrical specs; use when PowerDI 123 footprint not available

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1