Opens in a new tab

TPS62160DSGR

3V-17V, 1A synchronous buck converter, DCS-Control, 2.25MHz, WSON-8 (2x2mm), adjustable 0.9V-6V output

13555

Effective Inventory

Image for reference only

Manufacturer Part:

TPS62160DSGR

Package:

WSON-8 (2x2mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TPS62160DSGR from Texas Instruments is a 3V to 17V input, 1A synchronous step-down DC-DC converter featuring DCS-Control topology. With a typical switching frequency of 2.25MHz, it achieves high efficiency and fast transient response in a tiny 2x2mm WSON-8 package. The adjustable output voltage ranges from 0.9V to 6V, with a quiescent current of just 17μA in power save mode.

Key Specifications

Topology Buck (Step-Down)
Input Voltage Range 3V ~ 17V
Output Voltage Range 0.9V ~ 6V (Adjustable)
Output Current 1A
Switching Frequency 2.25 MHz (typical)
Quiescent Current 17 μA (typical)
Control Mode DCS-Control
Synchronous Rectifier Yes
Duty Cycle (max) 100%
Operating Temperature -40°C ~ 125°C (TJ)
Package WSON-8 (2x2mm)
Part Status Active

Features

  • DCS-Control topology for fast transient response and high output voltage accuracy
  • 2.25MHz switching frequency enables small external components
  • Seamless Power Save Mode transition for high light-load efficiency
  • 100% duty cycle mode for lowest dropout operation
  • Power Good output for supply sequencing
  • Thermal shutdown and short-circuit protection
  • Pin-to-pin compatible with TPS62170 and TPS62125

Applications

  • Standard 12V power rail point-of-load conversion
  • Lithium-ion battery-powered POL supplies
  • LDO replacement in space-constrained designs
  • Embedded systems and digital cameras
  • Mobile PCs, tablets, and modems
Product Introduction: TPS62160DSGR Product Introduction

The TPS62160DSGR is a high-efficiency, synchronous step-down DC-DC converter from Texas Instruments, optimized for high power density applications. Operating from a 3V to 17V input range, it delivers up to 1A of continuous output current with adjustable output voltage from 0.9V to 6V. The proprietary DCS-Control topology combines adaptive on-time control with a voltage feedback loop, enabling fast transient response, seamless PWM/PSM mode transition, and high output accuracy. The 2.25MHz switching frequency allows the use of small inductors and capacitors, minimizing solution footprint. In power save mode, the device draws only 17μA from VIN, making it ideal for battery-powered applications. The 100% duty cycle mode supports low dropout operation when the input voltage approaches the output voltage.

Working Principle: TPS62160DSGR Working Principle

The TPS62160 uses TI’s DCS-Control (Direct Control with Seamless transition) topology, which combines adaptive on-time PWM control with a voltage-based error amplifier. In PWM mode at medium and heavy loads, the device operates at a fixed 2.25MHz switching frequency with continuous conduction. As the load current decreases, the converter seamlessly transitions into Power Save Mode (PSM), reducing the switching frequency to maintain high efficiency. The internal synchronous rectifier eliminates the need for an external Schottky diode. The FB pin senses the output voltage through a resistor divider; the internal error amplifier compares it to an 800mV reference and adjusts the on-time accordingly. The Power Good (PG) open-drain output indicates when the output voltage is within regulation, enabling power sequencing in multi-rail systems.

Pin Description: TPS62160DSGR Pin Definition and Functions
Pin Name Type Description
1 AGND GND Analog ground
2 VIN PWR Input supply voltage (3V-17V)
3 EN I Enable (active high, internal pull-down)
4 PG O Power Good output (open-drain)
5 FB I Feedback voltage input (regulates to 800mV)
6 VOS I Output voltage sense for control loop
7 PGND GND Power ground
8 SW O Switch node (connect to inductor)
Application Scenarios: In which products and applications is TPS62160DSGR used
  • 12V Rail POL: Efficient 12V to 3.3V/5V conversion for industrial and computing systems
  • Battery-Powered Devices: Li-ion to 1.8V/3.3V conversion with 17μA quiescent current
  • LDO Replacement: Higher efficiency alternative to linear regulators in thermally constrained designs
  • Embedded Systems: Compact POL supply for FPGAs, processors, and peripherals
  • Portable Electronics: Multi-cell battery to system rail conversion in cameras and modems
Alternative Models: What chips are recommended as replacements for TPS62160DSGR
Model Manufacturer Key Difference
TPS62160DGKR Texas Instruments VSSOP-8 package variant (3x3mm)
TPS62161DSGR Texas Instruments Fixed 5V output version
TPS62170DSGR Texas Instruments Lower current (0.5A), pin-compatible
TLV62569DBVR Texas Instruments 2A output, SOT-23-5, lower input range
AP63200WU-7 Diodes Inc 2A, 3.8V-32V input, SOT-23-6

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1