Opens in a new tab

AOZ1282CI

4.5V-36V, 1.2A non-synchronous buck regulator, 450kHz, SOT23-6L, adjustable 0.8V output

7865

Effective Inventory

Image for reference only

Manufacturer Part:

AOZ1282CI

Package:

SOT23-6L

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The AOZ1282CI from Alpha & Omega Semiconductor is an EZBuck 1.2A simple buck regulator with a wide 4.5V to 36V input voltage range. Featuring a fixed 450kHz PWM switching frequency, adjustable output voltage down to 0.8V, and up to 95% efficiency, it is housed in a compact SOT23-6L package for space-constrained applications.

Key Specifications

Topology Buck (Step-Down, Non-Synchronous)
Input Voltage Range 4.5V ~ 36V
Output Voltage Range 0.8V ~ 30V (Adjustable)
Output Current 1.2A (continuous)
Switching Frequency 450 kHz (fixed)
RDS(ON) (HS FET) 420 mΩ
Feedback Voltage 800 mV
Current Limit 1.5A (typ), 1.9A (max)
Quiescent Current 1 mA (typical)
Max Duty Cycle 87%
Operating Temperature -40°C ~ 85°C
Package SOT23-6L
Part Status Full Production

Features

  • Wide 4.5V to 36V input voltage range
  • 1.2A continuous output current
  • Up to 95% efficiency
  • Fixed 450kHz PWM operation
  • Internal NMOS with 420mΩ RDS(ON)
  • Output voltage adjustable down to 0.8V
  • Internal compensation and soft start (1.5ms)
  • Cycle-by-cycle current limiting
  • Short-circuit protection with auto-restart
  • Thermal shutdown protection

Applications

  • Telecom, networking, and datacom equipment
  • Point-of-load DC/DC conversion from 12V/24V rails
  • Set-top boxes and cable modems
  • DVD drives and hard disk drives
  • LCD monitors and TVs
Product Introduction: AOZ1282CI Product Introduction

The AOZ1282CI is a high-efficiency, easy-to-use 1.2A buck regulator from Alpha & Omega Semiconductor’s EZBuck product line. It operates from a wide 4.5V to 36V input voltage range and provides up to 1.2A of continuous output current with adjustable output voltage down to 0.8V. The device uses current-mode PWM control with fixed 450kHz switching frequency and internal compensation, simplifying external component selection. An internal 420mΩ NMOS high-side switch handles power conversion, while an external Schottky diode serves as the freewheeling element. The device features 1.5ms internal soft start to limit inrush current, cycle-by-cycle overcurrent protection, short-circuit protection with auto-restart, and thermal shutdown. The SOT23-6L package enables compact PCB layouts.

Working Principle: AOZ1282CI Working Principle

The AOZ1282CI uses a current-mode PWM control architecture with fixed 450kHz switching frequency. The internal error amplifier compares the FB pin voltage (sensed from the output resistor divider) with the 800mV internal reference and generates a control signal. This control signal, combined with the current sense signal from the internal NMOS, determines the on-time of the high-side switch via the PWM comparator. During each switching cycle, the NMOS turns on and current flows through the inductor to the output and load. When the NMOS turns off, the inductor current freewheels through the external Schottky diode. The bootstrap capacitor (between BST and LX pins) provides the gate drive voltage for the NMOS. Cycle-by-cycle current limiting protects against overloads.

Pin Description: AOZ1282CI Pin Definition and Functions
Pin Name Type Description
1 BST I Bootstrap voltage input; connect 100nF cap to LX
2 GND GND Ground
3 FB I Feedback input; regulated to 0.8V
4 EN I Enable (active high); do not float
5 VIN PWR Supply voltage input (4.5V-36V)
6 LX O PWM switch output; connect to inductor
Application Scenarios: In which products and applications is AOZ1282CI used
  • 12V/24V POL: Step-down from industrial bus voltages to 3.3V/5V logic rails
  • Telecom Equipment: 24V/48V to low-voltage conversion in networking racks
  • LCD Displays: Panel power supply from 12V or 24V input
  • Set-Top Boxes: Compact buck converter for cable and satellite receivers
  • Industrial Sensors: Wide input range suits variable industrial power supplies
Alternative Models: What chips are recommended as replacements for AOZ1282CI
Model Manufacturer Key Difference
AOZ1280CI Alpha & Omega 0.6A output, same package, lower current
AOZ1284CI Alpha & Omega 3A output, wider input range
LMR14203XMK Texas Instruments 4.5-42V, 0.35A, SOT-23-6
TLV62568PDDCR Texas Instruments 5.5V input, 1A, SOT-563, synchronous
AP63203WU-7 Diodes Inc 3.8-32V, 2A, SOT-23-6, synchronous

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1