Opens in a new tab

LM1085ISX-3.3/NOPB

3 A LDO regulator, 3.3 V fixed, 1.3 V dropout, Pb-free, TO-263 tape and reel

5400

Effective Inventory

Image for reference only

Manufacturer Part:

LM1085ISX-3.3/NOPB

Package:

TO-263-3 (D2PAK, 10.16 x 8.64 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The LM1085ISX-3.3/NOPB from Texas Instruments is the lead-free (Pb-free) variant of the 3 A low-dropout positive voltage regulator with fixed 3.3 V output. Featuring a maximum dropout of 1.5 V at 3 A, current limiting, and thermal shutdown, it is supplied in a TO-263 (D2PAK) package on tape and reel. The NOPB suffix indicates Pb-free terminal finish.

Key Specifications

Output Voltage 3.3 V (fixed)
Output Current 3 A
Dropout Voltage 1.3 V typical, 1.5 V max @ 3 A
Input Voltage Range 4.8 V to 27 V
Line Regulation 0.015% typical
Load Regulation 0.1% typical
PSRR 72 dB at 120 Hz
Operating Temperature -40°C to 125°C

Features

  • 3 A output current capability
  • Low dropout voltage: 1.3 V typical at 3 A
  • Fixed 3.3 V output with high accuracy
  • Internal current limiting and thermal shutdown protection
  • Zener trimmed bandgap reference
  • Pb-free terminal finish (NOPB)
  • TO-263 surface-mount package on tape and reel
  • Pin-compatible with LM317 footprint

Applications

  • 3.3 V logic power supply regulation
  • Post-regulation for switching power supplies
  • Battery-powered systems and chargers
  • Embedded processor and FPGA core power
Product Introduction: LM1085ISX-3.3/NOPB Product Introduction

The LM1085ISX-3.3/NOPB is the lead-free variant of the LM1085 3 A low-dropout positive voltage regulator from Texas Instruments. It provides a fixed 3.3 V output with a maximum dropout voltage of 1.5 V at the full 3 A load, making it well-suited for 5 V to 3.3 V conversion in mixed-voltage digital systems. The NOPB suffix indicates that the device uses a Pb-free terminal finish (tin), complying with RoHS requirements for lead-free assembly. The regulator incorporates a zener-trimmed bandgap reference for excellent output voltage accuracy, along with internal current limiting and thermal shutdown circuits for robust fault protection. The TO-263 (D2PAK) package provides excellent thermal dissipation capability in a surface-mount footprint, and the tape-and-reel packaging supports automated SMT assembly processes.

Working Principle: LM1085ISX-3.3/NOPB Working Principle

The LM1085ISX-3.3/NOPB operates as a series pass linear regulator with three control loops: (1) The voltage regulation loop compares the output voltage with an internal bandgap reference. For the fixed 3.3 V version, an internal resistor divider sets the output voltage, and the error amplifier drives the PNP pass transistor to maintain regulation. (2) The current limiting circuit monitors the pass transistor current and reduces the gate drive when the current exceeds the safe operating limit, protecting against output overloads and short circuits. (3) The thermal protection circuit monitors the junction temperature and shuts down the pass transistor at approximately 165°C, with automatic recovery when the temperature drops below the hysteresis threshold. The low dropout architecture uses a PNP pass element that can operate in saturation with minimal VCE, enabling regulation with input-output differentials as low as 1.3 V.

Pin Description: LM1085ISX-3.3/NOPB Pin Definition and Functions
Pin No. Pin Name Function
1 ADJ/GND Ground connection (fixed voltage version)
2 VOUT Regulated 3.3 V output
3 VIN Unregulated input supply (4.8 V to 27 V)
Tab VOUT Output tab (connected to pin 2, aids thermal dissipation)
Application Scenarios: In which products and applications is LM1085ISX-3.3/NOPB used
  • 5 V to 3.3 V power conversion in RoHS-compliant embedded systems requiring Pb-free components
  • Post-regulation for switch-mode power supplies in telecom and networking equipment
  • FPGA and microcontroller core voltage regulation where 3 A current and low dropout are required
  • Industrial and automotive systems needing robust thermal and overcurrent protection in a surface-mount LDO
Alternative Models: What chips are recommended as replacements for LM1085ISX-3.3/NOPB
Model Brand Output Max Current Lead-Free
LM1085IS-3.3/NOPB TI 3.3 V 3 A Yes
LM1085ISX-3.3 TI 3.3 V 3 A Sn finish
LM1084ISX-3.3/NOPB TI 3.3 V 5 A Yes
LM1117SX-3.3/NOPB TI 3.3 V 0.8 A Yes
LT1085CM-3.3#PBF ADI 3.3 V 3 A Yes

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1