Opens in a new tab

BSS138

N-Channel logic-level MOSFET, 50V, 220mA, RDS(on) 3.5 Ohm, SOT-23-3

6506

Effective Inventory

Image for reference only

Manufacturer Part:

BSS138

Package:

SOT-23-3 / TO-236-3 (2.9 x 1.3 x 1.0 mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The BSS138 from onsemi (formerly Fairchild) is an N-channel logic-level enhancement-mode MOSFET in the industry-standard SOT-23-3 surface-mount package. Rated for 50V drain-source voltage and 220mA continuous drain current, it is specifically designed for low-voltage switching applications. With a gate threshold voltage of 0.8-1.5V and RDS(on) of 3.5 Ohm maximum at VGS=10V, the BSS138 can be driven directly from 3.3V and 5V microcontroller GPIOs, making it one of the most popular small-signal MOSFETs for logic-level interfacing.

Key Specifications

VDS (Drain-Source Voltage) 50V
ID (Continuous Drain Current) 220mA
RDS(on) Max @ VGS=10V 3.5 Ohm
RDS(on) Max @ VGS=4.5V 6.0 Ohm
VGS(th) Range 0.8V to 1.5V
Total Gate Charge (Qg) 2.4nC max @ 10V
Input Capacitance (Ciss) 27pF @ 25V
Power Dissipation 360mW
Operating Temperature -55 to +150°C
Package SOT-23-3 (TO-236-3)

Features

  • Logic-level gate drive: 0.8V min threshold enables 2.5V/3.3V operation
  • Low RDS(on): 3.5 Ohm max at VGS=10V
  • Low gate charge (2.4nC) for fast switching
  • High-density cell design for low on-resistance
  • Pb-free and halogen-free construction
  • Industry-standard SOT-23-3 package
  • Low input capacitance (27pF) minimizes drive power

Applications

  • Logic-level signal switching and level shifting
  • Load switching in battery-powered devices
  • I2C and SPI bus voltage level translation
  • Small servo motor control
  • MOSFET gate driver pre-driver
Product Introduction: BSS138 Product Introduction

The BSS138 from onsemi is a widely-used N-channel logic-level enhancement-mode MOSFET produced using proprietary high cell density DMOS technology. Engineered to minimize on-state resistance while providing rugged and reliable switching performance, the BSS138 has become an industry staple for low-voltage, low-current applications. Its low gate threshold voltage (0.8-1.5V) enables direct control from 3.3V and even 2.5V logic, making it the go-to choice for bidirectional level shifting circuits in I2C and SPI buses. The industry-standard SOT-23-3 package allows high-density PCB placement, and its extremely low cost makes it practical for high-volume consumer electronics.

Working Principle: BSS138 Working Principle

The BSS138 operates as a voltage-controlled switch. When a gate-source voltage (VGS) exceeding the threshold voltage (VGS(th) = 0.8-1.5V) is applied, an inversion layer forms beneath the gate oxide, creating a conductive channel between drain and source. The channel resistance (RDS(on)) decreases with increasing VGS, reaching 3.5 Ohm maximum at VGS=10V and 6.0 Ohm at VGS=4.5V. As an enhancement-mode device, it is normally off when VGS=0, with leakage current below 0.5uA. The small gate charge (1.7-2.4nC) enables fast switching transitions with typical turn-on delay of 2.5ns and turn-off delay of 20ns. The body diode between source and drain provides a path for inductive kickback currents in switching applications.

Pin Description: BSS138 Pin Definition and Functions
Pin Name Type Function
1 G (Gate) Input Gate control terminal
2 S (Source) Source Source terminal
3 D (Drain) Drain Drain terminal
Application Scenarios: In which products and applications is BSS138 used
  • Bidirectional voltage level translation for I2C, SPI, and UART buses (3.3V to 5V)
  • Low-side load switching in battery-powered microcontroller circuits
  • LED and relay driver controlled by GPIO pins
  • Power gating for low-power sleep modes in portable devices
  • Signal gating and analog switch replacement in sensor interfaces
Alternative Models: What chips are recommended as replacements for BSS138
Manufacturer Part Number Package Notes
NXP BSS138 SOT-23-3 60V version, pin compatible
Diodes Inc MMBF170 SOT-23-3 60V, 500mA, higher RDS(on)
Infineon BSR14 SOT-23-3 60V, 280mA, logic level
Vishay 2N7002 SOT-23-3 60V, 300mA, popular alternative
TI 2N7002K SOT-23-3 60V, 350mA, ESD protected gate

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1