Opens in a new tab

CSD17313Q2

30V N-ch NexFET MOSFET, 24mOhm, 2.1nC Qg, 2x2mm SON, 5V gate drive

8760

Effective Inventory

Image for reference only

Manufacturer Part:

CSD17313Q2

Package:

WSON-6 / SON 2mm x 2mm (DQK, 2.0 x 2.0 x 0.75 mm, exposed pad)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The CSD17313Q2 from Texas Instruments is a 30V N-channel NexFET power MOSFET optimized for 5V gate drive. With 24mOhm RDS(on) at VGS=8V and ultra-low 2.1nC gate charge, it minimizes conduction and switching losses in DC-DC converters. Housed in a 2mm x 2mm SON (WSON-6) package with exposed thermal pad.

Key Specifications

VDS 30V
RDS(on) at VGS=4.5V 26mOhm typ, 32mOhm max
RDS(on) at VGS=8V 24mOhm typ, 30mOhm max
Continuous Drain (package) 5A
Continuous Drain (silicon, TC=25°C) 19A
Gate Charge (Qg) 2.1nC typ
VGS(th) 1.3V typical
Operating Temperature -55 to 150°C
Package SON 2mm x 2mm (WSON-6)

Features

  • Optimized for 5V gate drive
  • Ultra-low Qg (2.1nC) and Qgd (0.4nC)
  • Low RDS(on): 24mOhm at VGS=8V
  • Low thermal resistance SON package
  • Pb-free, RoHS, halogen-free
  • Logic-level gate threshold

Applications

  • DC-DC buck and boost converters
  • Battery load management
  • Point-of-load power modules
  • Motor drive and load switches
  • Portable device power management
Product Introduction: CSD17313Q2 Product Introduction

The CSD17313Q2 from TI is a 30V N-channel NexFET optimized for 5V gate drive in DC-DC converters. Outstanding FOM (RDS(on) x Qg) with 24mOhm on-resistance and 2.1nC gate charge. The 2mm x 2mm SON with exposed thermal pad achieves 7.4°C/W junction-to-case. Pin-compatible with CSD17318Q2 (16.9mOhm variant).

Working Principle: CSD17313Q2 Working Principle

Uses TI NexFET trench MOSFET technology for very low specific on-resistance and gate charge simultaneously. Low gate charge means minimal energy for switching, reducing driver power at high frequencies. Low Qgd/Qgs ratio (0.57) indicates good Miller plateau immunity in half-bridge. SON exposed pad provides low-impedance thermal path.

Pin Description: CSD17313Q2 Pin Definition and Functions
Pin Name Type Function
1-4 D Drain Drain terminals (connected to pad)
5 G Gate Gate control
6 S Source Source terminal
Pad D Drain Exposed thermal pad (drain)
Application Scenarios: In which products and applications is CSD17313Q2 used
  • Synchronous buck converter low-side FET in POL modules
  • Battery load switch with 5V gate drive
  • DC-DC boost converter switch in portables
  • Motor driver half-bridge with low RDS(on)
Alternative Models: What chips are recommended as replacements for CSD17313Q2
Manufacturer Part Number Package Notes
TI CSD17318Q2 SON 2×2 16.9mOhm, pin compatible
Vishay SiS426DN PowerPAK 1212-8 30V, 24mOhm

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1