Opens in a new tab

ULN2803ADW

8-ch Darlington driver, 500mA/ch, 50V, built-in diodes + 2.7k input R, SOIC-18

8340

Effective Inventory

Image for reference only

Manufacturer Part:

ULN2803ADW

Package:

SOIC-18 (11.4 x 7.5 x 2.65 mm, DW package, wide body)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The ULN2803ADW from onsemi is an 8-channel Darlington transistor array with 500mA per channel, integrated flyback diodes, and 2.7kOhm input resistors for direct 5V TTL/CMOS interface in an 18-pin SOIC package.

Key Specifications

Channels 8 (Darlington pairs)
Output Current per Channel 500 mA (max)
Collector-Emitter Voltage 50V
Input Resistor 2.7 kOhm (built-in, for 5V logic)
Saturation Voltage 1.1V @ 100mA, 1.3V @ 350mA
Current Gain (hFE) >1000 (Darlington)
Flyback Diodes Yes (integrated, common cathode)
Input Compatibility 5V TTL, CMOS directly
Package SOIC-18 (wide, 7.5mm)
Operating Temperature -40 to +85 C

Features

  • 8 Darlington drivers in a single package
  • 500mA per channel output capability
  • Integrated 2.7kOhm input resistors for 5V logic
  • Built-in flyback/clamp diodes for inductive loads
  • Common emitter configuration (sinking)

Applications

  • Relay and solenoid drivers
  • Stepper motor drivers
  • LED lamp drivers
  • Logic buffer/interface
Product Introduction: ULN2803ADW Product Introduction

The ULN2803ADW from onsemi is an 8-channel Darlington transistor array designed for interfacing low-level logic signals to high-current loads such as relays, solenoids, stepper motors, and LED displays. Each of the 8 channels consists of a Darlington-connected NPN transistor pair with integrated 2.7kOhm base resistors, allowing direct connection to 5V TTL or CMOS logic outputs without additional interface components. The Darlington configuration provides a current gain exceeding 1000, enabling 500mA output current from just 0.5mA of input drive current. The 50V collector-emitter voltage rating supports common relay and solenoid supply voltages. Integrated flyback (clamp) diodes on each output suppress the inductive kickback voltage generated when driving inductive loads such as relay coils and stepper motor windings, protecting both the driver transistors and the driving logic. The common cathode connection of all flyback diodes (COM pin) is typically connected to the load supply voltage. The ULN2803 is the 5V logic version of the ULN2800 family; the ULN2804 variant has 10.5kOhm input resistors for 6-15V CMOS/P-MOS logic, and the ULN2801/2802 have no input resistors for custom interface circuits. The SOIC-18 wide-body package (DW suffix) provides adequate thermal performance for moderate current applications. The device is commonly used in PLC output modules, relay boards, and Arduino-compatible motor shields.

Working Principle: ULN2803ADW Working Principle

The ULN2803ADW operates as 8 independent Darlington-pair open-collector sinking drivers. Key subsystems include: (1) Darlington Pair – each channel consists of two NPN transistors connected in a Darlington configuration; the collector of the first transistor feeds the base of the second; this multiplies the current gains (hFE1 x hFE2 > 1000), so a 0.5mA input current can drive 500mA output; the tradeoff is a higher saturation voltage (1.1V at 100mA, 1.3V at 350mA) compared to a single transistor; (2) Input Resistor – a 2.7kOhm series resistor is integrated between the input pin and the first transistor base; at 5V logic HIGH, this provides approximately (5V – 2xVBE) / 2.7k = 1.35mA base drive, sufficient to saturate the Darlington at up to 500mA load; (3) Flyback Diode – each output has an integrated diode from the collector to the COM pin; when an inductive load (relay, motor) is turned off, the collapsing magnetic field generates a reverse voltage spike; the flyback diode provides a path for the inductive current, clamping the collector voltage to Vsupply + 0.7V; the COM pin connects all diode cathodes together and should be tied to the load supply; (4) Open-Collector Output – the output can only sink current (pull to GND); it cannot source current; the load connects between the supply and the output pin; when the input is HIGH, the Darlington saturates and the output pulls toward GND; when the input is LOW, the Darlington is off and the output floats (the load sees the supply voltage through its own connection).

Pin Description: ULN2803ADW Pin Definition and Functions
Pin Name Function
1-8 1B-8B Input bases (connect to MCU/logic outputs)
9 GND Ground (common emitter)
10 COM Flyback diode common cathode (connect to load supply)
11-18 8C-1C Output collectors (connect to loads)
Application Scenarios: In which products and applications is ULN2803ADW used
  • 8-channel relay board: 5V MCU drives 8x 12V relays, each 100mA coil, with built-in flyback diodes
  • Unipolar stepper motor: 4 channels drive the 4 windings of a 5-wire stepper at 300mA per winding
  • LED matrix row driver: sink 8 rows of LEDs at 50mA each from 5V logic
  • Solenoid array: drive 8 solenoid valves in an industrial control system from PLC outputs
Alternative Models: What chips are recommended as replacements for ULN2803ADW
Manufacturer Part Number Package Notes
onsemi ULN2803APG DIP-18 Through-hole version
TI ULN2803ADWR SOIC-18 TI version
onsemi ULN2804ADW SOIC-18 10.5kOhm input R (6-15V CMOS)
onsemi ULN2003ADW SOIC-16 7-channel version
Toshiba TD62083AFWG SOP-18 Similar 8-ch Darlington, higher current

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1