Opens in a new tab

SN65HVD72DR

3.3V CAN transceiver, 1Mbps, +/-16kV ESD, ISO 11898-2, SOIC-8

12080

Effective Inventory

Image for reference only

Manufacturer Part:

SN65HVD72DR

Package:

SOIC-8 (4.9 x 3.9 x 1.5 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The SN65HVD72DR from Texas Instruments is a 3.3V CAN bus transceiver compatible with ISO 11898-2 in an 8-pin SOIC package. With 1Mbps data rate, low 370uA standby current, and +/-16kV IEC ESD protection on bus pins, it provides reliable CAN physical layer interface for 3.3V microcontrollers.

Key Specifications

Protocol CAN (ISO 11898-2)
Data Rate 1 Mbps
Supply Voltage 3.0V to 3.6V
Bus ESD Protection +/-16 kV HBM
Common-Mode Range -2V to +7V
Standby Current 370 uA (typ)
Operating Temperature -40 to +85 C
Package SOIC-8

Features

  • 3.3V CAN transceiver for ISO 11898-2
  • 1Mbps data rate
  • +/-16kV bus pin ESD protection
  • Low standby current: 370uA
  • Thermal shutdown protection
  • Cross-wire and overvoltage protection
  • Unpowered node does not disturb bus
  • Pin-compatible with SN65HVD230

Applications

  • 3.3V MCU CAN bus interfaces
  • Industrial automation CAN networks
  • Building and HVAC control
  • Motor control CAN communication
Product Introduction: SN65HVD72DR Product Introduction

The SN65HVD72DR from Texas Instruments is a 3.3V CAN bus transceiver compatible with ISO 11898-2 in an 8-pin SOIC package. The 72 in the part number indicates it is part of TI’s next-generation 3.3V CAN transceiver family, offering improved EMC performance and lower bus leakage compared to the earlier SN65HVD230. Operating from a single 3.0V to 3.6V supply, it provides the physical layer interface between the CAN protocol controller and the CAN bus differential pair. The device features +/-16kV HBM ESD protection on bus pins, thermal shutdown, and fault-tolerant design with cross-wire and overvoltage protection. An unpowered node presents high impedance to the bus, not disturbing other nodes.

Working Principle: SN65HVD72DR Working Principle

The SN65HVD72 operates through four subsystems: (1) CAN Transmitter: A differential driver converts the single-ended TXD input to CAN bus differential signals. The driver output meets the ISO 11898-2 specification for dominant and recessive bus states. (2) CAN Receiver: A differential receiver converts the bus signal to a single-ended RXD output. The receiver operates over a -2V to +7V common-mode range with +/-25V transient capability. (3) Mode Control: The RS pin controls the operating mode – high-speed mode (RS=GND), slope-control mode (RS=resistor to GND for EMC optimization), and standby/listen-only mode (RS=HIGH, driver disabled, receiver active at 370uA). (4) Protection: Thermal shutdown disables the driver above 165C. Cross-wire protection, loss-of-ground, and overvoltage protection ensure robustness in harsh industrial environments.

Pin Description: SN65HVD72DR Pin Definition and Functions
Pin Name Type Description
1 D Input Transmit data input (from MCU)
2 GND Power Ground
3 VCC Power 3.3V supply voltage
4 R Output Receive data output (to MCU)
5 VREF Output Reference voltage (VCC/2)
6 CANL I/O CAN bus low line
7 CANH I/O CAN bus high line
8 RS Input Mode select / slope control
Application Scenarios: In which products and applications is SN65HVD72DR used
  • 3.3V MCU CAN interface with slope control for EMC-optimized industrial networks
  • Building automation CAN bus with +/-16kV ESD and 370uA low standby current
  • Motor drive CAN communication with cross-wire and overvoltage protection
  • Multi-node CAN network with unpowered high-impedance node isolation
Alternative Models: What chips are recommended as replacements for SN65HVD72DR
Model Manufacturer Supply Standby Notes
SN65HVD230 TI 3.3V 370uA Earlier generation
SN65HVD231 TI 3.3V 40nA Sleep mode version
SN65HVD74 TI 3.3V — With autobaud
MCP2551-I/SN Microchip 5V N/A 5V alternative

Recommend Parts

MCP6S26-I

6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

Brand: MICROCHIP

Package: SOIC-14 (150 mils body width)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MM3Z9V1

9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

Brand: ON

Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

IN STOCK: 10735pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT89S51

8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

Package: PDIP-40 / TQFP-44 / PLCC-44

IN STOCK: 15000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

GD32F303CBT6

Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

Brand: gigadevice

Package: LQFP-48 (7x7mm, 0.5mm pitch)

IN STOCK: 3342pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MIC5205-3.3YM5-TR

3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

Brand: MICROCHIP

Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

IN STOCK: 9858pcs

Cargo cycle: 3-7 Days

The minimum order is 1