Opens in a new tab

MAX485CSA+T

RS-485/422 transceiver, 2.5Mbps, SOIC-8

13661

Effective Inventory

Image for reference only

Manufacturer Part:

MAX485CSA+T

Package:

SOIC-8 (3.9 x 4.9 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The MAX485CSA+T from Analog Devices (formerly Maxim) is a +5V RS-485/RS-422 transceiver with 2.5Mbps data rate in an SOIC-8 package. With 1/4 unit load (allowing 128 devices on bus), +/-7kV ESD protection on bus pins, and slew-rate limited output for reduced EMI, it is the industry-standard RS-485 interface IC.

Key Specifications

Standard RS-485 / RS-422
Data Rate 2.5Mbps
Supply Voltage 5V (+/-5%)
Iq (no load) 300uA typical
Shutdown Current 1nA typical
Unit Load 1/4 (128 devices on bus)
ESD Protection +/-7kV HBM on bus pins
Output Current +/-60mA drive
Receiver Input Impedance 48kOhm (1/4 unit load)
Operating Temp -40 to +85 C
Package SOIC-8

Features

  • 2.5Mbps data rate for high-speed communication
  • 1/4 unit load for 128 devices on one bus
  • +/-7kV ESD protection on bus pins
  • 300uA supply current, 1nA shutdown
  • Slew-rate limited for reduced EMI
  • 5V single supply with +5% tolerance

Applications

  • Industrial RS-485/Modbus networks
  • DMX512 lighting control
  • Building automation HVAC
  • Motor drive communication links
Product Introduction: MAX485CSA+T Product Introduction

The MAX485CSA+T from Analog Devices (formerly Maxim) is a +5V RS-485/RS-422 transceiver with 2.5Mbps data rate in an SOIC-8 package. With 1/4 unit load (allowing 128 devices on bus), +/-7kV ESD protection on bus pins, and slew-rate limited output for reduced EMI, it is the industry-standard RS-485 interface IC.

Working Principle: MAX485CSA+T Working Principle

The MAX485CSA+T operates as described in the product overview. Key subsystems include the input stage, processing/gain stage, output stage, and protection circuitry as detailed in the datasheet.

Pin Description: MAX485CSA+T Pin Definition and Functions
Pin Name Type Description
1 RO Output Receiver output
2 RE Input Receiver enable (active low)
3 DE Input Driver enable (active high)
4 DI Input Driver data input
5 GND Power Ground
6 A I/O Non-inverting bus pin
7 B I/O Inverting bus pin
8 VCC Power Supply (4.75-5.25V)
Application Scenarios: In which products and applications is MAX485CSA+T used
  • Industrial RS-485/Modbus networks
  • DMX512 lighting control
  • Building automation HVAC
  • Motor drive communication links
Alternative Models: What chips are recommended as replacements for MAX485CSA+T
Model Manufacturer Package Notes
ST3485ECDR ST SOIC-8 Pin-compatible, lower cost
SN65HVD485DR TI SOIC-8 Higher speed 50Mbps
SP3485CN-L/TR MaxLinear SOIC-8 3.3V version
THVD1450DR TI SOIC-8 3.3-5V, 500kbps

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1