Opens in a new tab

Home » Integrated Circuits ICs, Interface ICs » LTC2862IS8-1#PBF

LTC2862IS8-1#PBF

3.3V RS-485/RS-422 transceiver, 20Mbps, half-duplex, SOIC-8

4183

Effective Inventory

Image for reference only

Manufacturer Part:

LTC2862IS8-1#PBF

Package:

SOIC-8

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The LTC2862IS8-1#PBF from Analog Devices is a 3.3V 20Mbps RS-485/RS-422 half-duplex transceiver with extended common-mode range and 1nA shutdown current in SOIC-8.

Key Specifications

Package SOIC-8

Features

  • See datasheet for complete specifications
  • Industry-standard package

Applications

  • Industrial control
  • Consumer electronics
  • Communication equipment
  • Power management
Product Introduction: LTC2862IS8-1#PBF Product Introduction

The LTC2862IS8-1#PBF from Analog Devices is a 3.3V 20Mbps RS-485/RS-422 half-duplex transceiver with extended common-mode range and 1nA shutdown current in SOIC-8.

Working Principle: LTC2862IS8-1#PBF Working Principle

The LTC2862IS8-1#PBF is a 3.3V RS-485/RS-422 half-duplex transceiver from Analog Devices in SOIC-8 with 250kbps data rate (-1 suffix). The -1 version supports data rates up to 250kbps with enhanced ESD protection and reduced EMI compared to the -2 (20Mbps) version. The driver output differential voltage is 1.5V minimum into a 54-ohm load (standard RS-485). The receiver input impedance is 1/4 unit load (48k-ohm), allowing up to 128 devices on the bus (vs 32 for standard unit-load transceivers). The DE and RE pins control the driver and receiver independently; in typical half-duplex operation, DE and RE are tied together so the device is either transmitting (DE=HIGH, RE=HIGH) or receiving (DE=LOW, RE=LOW). The internal pull-down resistors on DE and RE ensure the device powers up in receive mode. The receiver fail-safe feature guarantees RO is HIGH when the bus is open, shorted, or terminated but idle (all transmitters off). This prevents the UART from receiving false start bits. The extended ESD protection is +/-15kV HBM on the bus pins (A, B). The operating supply current is 1.1mA at 3.3V with no load. The driver propagation delay is 200ns typical. The IS8 suffix specifies SOIC-8, industrial temperature (-40C to +85C). The #PBF suffix indicates lead-free RoHS compliant.

Pin Description: LTC2862IS8-1#PBF Pin Definition and Functions
Pin Name Type Function
1 RO Output Receiver output (to MCU UART RX, HIGH when A>B or open)
2 RE Input Receiver enable (active LOW, internal pull-down)
3 DE Input Driver enable (active HIGH, internal pull-down)
4 DI Input Driver data input (from MCU UART TX)
5 GND Power Ground
6 A I/O Non-inverting bus pin (connects to RS-485 A terminal)
7 B I/O Inverting bus pin (connects to RS-485 B terminal)
8 VCC Power Supply (3.0-3.6V)
Application Scenarios: In which products and applications is LTC2862IS8-1#PBF used
  • Industrial control
  • Consumer electronics
  • Communication equipment
  • Power management
  • Alternative Models: What chips are recommended as replacements for LTC2862IS8-1#PBF
    Manufacturer Part Number Package Notes
    Analog Devices LTC2862IS8-2#PBF SOIC-8 20Mbps version (vs -1 at 250kbps)
    Analog Devices LTC2863IS8-1#PBF SOIC-8 Full-duplex version with Y/Z pins
    Texas Instruments SN65HVD72DR SOIC-8 3.3V RS-485, 250kbps, similar
    Maxim MAX3485ECSA+T SOIC-8 3.3V RS-485, 10Mbps, ESD protected
    Analog Devices ADM3485EARZ SOIC-8 3.3V RS-485, 12Mbps, low power

    Recommend Parts

    0751.0505

    Schurter fuse, 0751.0505

    Brand: schurter

    Package: See datasheet

    IN STOCK: 6768pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    TL062CDR

    Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

    Brand: TI

    Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

    IN STOCK: 11576pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    P89LPC922FN

    8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

    Brand: NXP

    Package: SSOP-20 (7.2 x 5.3 mm)

    IN STOCK: 12628pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    AC0603JR-070RL

    Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

    Brand: Yageo

    Package: 0603 (1608 Metric)

    IN STOCK: 100000pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    LMR34206FSC5RNXRQ1

    42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

    Brand: TI

    Package: SOT-563 (1.6 x 1.2 x 0.55mm)

    IN STOCK: 6500pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    AO3402

    30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

    Brand: aosmd

    Package: SOT-23 (2.9 x 1.6 x 1.25mm)

    IN STOCK: 14066pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1