Opens in a new tab

INA240A4PWR

Current sense amplifier, 80V, 200V/V, TSSOP-8

7551

Effective Inventory

Image for reference only

Manufacturer Part:

INA240A4PWR

Package:

TSSOP-8 (3x3mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The INA240A4PWR from TI is a high-precision 80V current-sense amplifier with 200V/V gain and enhanced PWM rejection for motor drive current sensing in TSSOP-8.

Key Specifications

Package TSSOP-8 (3x3mm)

Features

  • See datasheet for complete specifications
  • Industry-standard package

Applications

  • Industrial control
  • Consumer electronics
  • Communication equipment
  • Power management
Product Introduction: INA240A4PWR Product Introduction

The INA240A4PWR from TI is a high-precision 80V current-sense amplifier with 200V/V gain and enhanced PWM rejection for motor drive current sensing in TSSOP-8.

Working Principle: INA240A4PWR Working Principle

The INA240A4PWR is a high-precision, high-side current sense amplifier from Texas Instruments in TSSOP-8, with a fixed gain of 200V/V (A4 version). It measures the voltage across a shunt resistor placed between the power supply and the load (high-side sensing), with a common-mode voltage range of -4V to +80V, making it suitable for 48V automotive and industrial systems. The key innovation is the enhanced PWM rejection: the device maintains accuracy during rapid common-mode voltage transitions (up to 2V/us), which occur in motor drive applications where the high-side switch chops the supply at 10-100kHz PWM. The offset voltage is 5uV typical (25uV max over temperature), and the gain error is 0.2% typical. With a 200V/V gain and a 10m-ohm shunt, a 1A current produces 200uV across the shunt, amplified to 40mV at the output. The bidirectional capability means the INA240 can measure both charging and discharging currents in battery systems. The REF1 and REF2 pins set the output reference voltage: for unidirectional measurement, connect both to GND for 0V baseline; for bidirectional, connect to VS/2 for mid-supply baseline. The bandwidth is 400kHz, sufficient for current control loops in motor drives. The quiescent current is 300uA. The A4 gain version (200V/V) is optimized for small shunt resistors in high-current applications. The -PWR suffix specifies TSSOP-8 tape-and-reel.

Pin Description: INA240A4PWR Pin Definition and Functions
Pin Name Type Function
1 IN- Input Negative shunt voltage input (connects to load side of shunt resistor)
2 GND Power Ground
3 REF1 Input Reference input 1 (sets output baseline, connect to GND or midpoint)
4 REF2 Input Reference input 2 (sets output baseline with REF1)
5 OUT Output Amplified output voltage (VOUT = (VSHUNT x GAIN) + VREF)
6 VS Power Supply (2.7-5.5V)
7 IN+ Input Positive shunt voltage input (connects to supply side of shunt resistor)
8 NC – No connect
Application Scenarios: In which products and applications is INA240A4PWR used
  • Industrial control
  • Consumer electronics
  • Communication equipment
  • Power management
  • Alternative Models: What chips are recommended as replacements for INA240A4PWR
    Manufacturer Part Number Package Notes
    Texas Instruments INA240A1PWR TSSOP-8 Same device, 20V/V gain
    Texas Instruments INA240A2PWR TSSOP-8 Same device, 50V/V gain
    Texas Instruments INA240A3PWR TSSOP-8 Same device, 100V/V gain
    Texas Instruments INA281AIDDFR SOT-23-5 80V, 200V/V, smaller package
    Analog Devices AD8418AWHRZ SOIC-8 80V, 60V/V, PWM rejection, similar

    Recommend Parts

    MCP6S26-I

    6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

    Brand: MICROCHIP

    Package: SOIC-14 (150 mils body width)

    IN STOCK: 6800pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    W25Q80VSSI

    8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

    Brand: Winbond

    Package: SOIC-8 208mil (5.3×8.0mm)

    IN STOCK: 4316pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    MM3Z9V1

    9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

    Brand: ON

    Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

    IN STOCK: 10735pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    AT89S51

    8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

    Package: PDIP-40 / TQFP-44 / PLCC-44

    IN STOCK: 15000pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    GD32F303CBT6

    Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

    Brand: gigadevice

    Package: LQFP-48 (7x7mm, 0.5mm pitch)

    IN STOCK: 3342pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    MIC5205-3.3YM5-TR

    3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

    Brand: MICROCHIP

    Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

    IN STOCK: 9858pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1