Opens in a new tab

LMV324IDR

Quad low-voltage op-amp, RR output, 1.1MHz, 2.7-5.5V, SOIC-14

5506

Effective Inventory

Image for reference only

Manufacturer Part:

LMV324IDR

Package:

SOIC-14 (8.65×3.91mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The LMV324IDR from TI is a quad low-voltage operational amplifier with rail-to-rail output, 1.1MHz GBW, and 2.7-5.5V supply in SOIC-14 for battery-powered and low-voltage analog applications.

Key Specifications

Channels 4
GBW 1.1MHz
Slew Rate 1.0V/us
Supply 2.7-5.5V
Iq/ch 130uA
Input Offset 1.7mV typ
Temp -40~125C

Features

  • Quad rail-to-rail output op-amp
  • Low-voltage 2.7-5.5V operation
  • 1.1MHz GBW
  • 130uA per channel
  • Cost-effective solution

Applications

  • Battery-powered instruments
  • Portable electronics
  • Sensor signal conditioning
  • Active filters
  • Low-voltage analog circuits
Product Introduction: LMV324IDR Product Introduction

The LMV324IDR from TI is a quad low-voltage operational amplifier with rail-to-rail output, 1.1MHz GBW, and 2.7-5.5V supply in SOIC-14 for battery-powered and low-voltage analog applications.

Working Principle: LMV324IDR Working Principle

The LMV324IDR is a quad low-voltage rail-to-rail output operational amplifier from TI/ST in SOIC-14, operating from 2.7V to 5.5V with 1.1MHz gain-bandwidth product and 1V/us slew rate. It is the low-voltage version of the industry-standard LM324, maintaining pin compatibility while extending operation down to 2.7V. The output stage swings to within 50mV of the rails with a 10k-ohm load (rail-to-rail output), but the input common-mode range extends only to VCC-1V (not rail-to-rail input). The supply current is 130uA per amplifier, giving a GBW-to-Iq ratio of 8.5kHz/uA. The input bias current is 45nA typical, and input offset voltage is 1.7mV typical. The device is designed for single-supply operation: the GND pin (pin 11) replaces the V- pin of the LM324, and the input common-mode range includes ground (0V), making it suitable for ground-referenced signal conditioning. The 1.1MHz GBW supports active filters up to approximately 100kHz. Each amplifier is independent, allowing different configurations per channel (inverting, non-inverting, comparator). The -IDR suffix specifies SOIC-14, industrial temperature range (-40C to +85C), tape-and-reel. Applications include battery-powered signal conditioning, sensor interfaces, and portable medical equipment.

Pin Description: LMV324IDR Pin Definition and Functions
Pin Name Type Function
1 1OUT Output Channel 1 output
2 1IN- Input Channel 1 inverting input
3 1IN+ Input Channel 1 non-inverting input
4 VCC Power Supply (2.7-5.5V)
5 2IN+ Input Channel 2 non-inverting input
6 2IN- Input Channel 2 inverting input
7 2OUT Output Channel 2 output
8 3OUT Output Channel 3 output
9 3IN- Input Channel 3 inverting input
10 3IN+ Input Channel 3 non-inverting input
11 GND Power Ground (0V)
12 4IN+ Input Channel 4 non-inverting input
13 4IN- Input Channel 4 inverting input
14 4OUT Output Channel 4 output
Application Scenarios: In which products and applications is LMV324IDR used
  • Battery-powered instruments
  • Portable electronics
  • Sensor signal conditioning
  • Active filters
  • Low-voltage analog circuits
  • Alternative Models: What chips are recommended as replacements for LMV324IDR
    Manufacturer Part Number Package Notes
    Texas Instruments LMV324IDR SOIC-14 Same device, TI label
    STMicroelectronics LMV324IDT SOIC-14 Same device, ST label
    Texas Instruments TLV9004IDR SOIC-14 1MHz RR I/O quad, lower offset
    Microchip MCP6004-E/SL SOIC-14 1MHz RR quad, 1.8-5.5V
    Analog Devices ADA4665-2ACPZ-R7 LFCSP-10 Dual 1.8V RR, low power

    Recommend Parts

    MCP6S26-I

    6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

    Brand: MICROCHIP

    Package: SOIC-14 (150 mils body width)

    IN STOCK: 6800pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    W25Q80VSSI

    8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

    Brand: Winbond

    Package: SOIC-8 208mil (5.3×8.0mm)

    IN STOCK: 4316pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    MM3Z9V1

    9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

    Brand: ON

    Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

    IN STOCK: 10735pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    AT89S51

    8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

    Package: PDIP-40 / TQFP-44 / PLCC-44

    IN STOCK: 15000pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    GD32F303CBT6

    Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

    Brand: gigadevice

    Package: LQFP-48 (7x7mm, 0.5mm pitch)

    IN STOCK: 3342pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    MIC5205-3.3YM5-TR

    3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

    Brand: MICROCHIP

    Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

    IN STOCK: 9858pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1