Opens in a new tab

TLC548CP

8-bit A/D converter, 45.5kHz, serial I/O, DIP-8

12420

Effective Inventory

Image for reference only

Manufacturer Part:

TLC548CP

Package:

DIP-8 (300mil)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TLC548CP from TI is an 8-bit 45.5kHz A/D converter with serial I/O interface and on-chip sample-and-hold in DIP-8 through-hole for simple analog-to-digital conversion.

Key Specifications

Package DIP-8 (300mil)

Features

  • See datasheet for complete specifications
  • Industry-standard package

Applications

  • Industrial control
  • Consumer electronics
  • Communication equipment
  • Power management
Product Introduction: TLC548CP Product Introduction

The TLC548CP from TI is an 8-bit 45.5kHz A/D converter with serial I/O interface and on-chip sample-and-hold in DIP-8 through-hole for simple analog-to-digital conversion.

Working Principle: TLC548CP Working Principle

The TLC548CP is an 8-bit successive approximation register (SAR) analog-to-digital converter from Texas Instruments in DIP-8, with 45.5kHz sampling rate and serial I/O interface. The conversion uses a capacitive DAC and comparator in a charge-redistribution architecture. A conversion begins when CS goes LOW: the previous result is shifted out on DATA OUT (MSB first) synchronized to I/O CLOCK, while the new analog input is sampled. After 8 clock cycles, the new conversion result is available. The sampling rate of 45.5kHz corresponds to a 22us total cycle time (8 clocks + internal conversion). The reference voltage inputs (REF+ and REF-) define the full-scale range: the digital output code 255 corresponds to ANALOG IN = REF+ – 1 LSB. With REF+ = 5.000V and REF- = 0V, 1 LSB = 5V/256 = 19.5mV. The analog input bandwidth extends to approximately 500kHz, but aliasing requires an anti-aliasing filter for signals above half the sample rate (22.75kHz). The input impedance is approximately 1GOhm (CMOS sample-and-hold), presenting minimal loading to the source. The differential nonlinearity (DNL) is +/-0.5 LSB typical, guaranteeing no missing codes. The total unadjusted error is +/-0.5 LSB. The device includes an on-chip system clock that controls the SAR conversion timing independently of I/O CLOCK. The CP suffix specifies DIP-8, commercial temperature (0C to +70C). The device is designed for simple 3-wire microcontroller interfaces where SPI is not available.

Pin Description: TLC548CP Pin Definition and Functions
Pin Name Type Function
1 REF+ Analog Positive reference voltage input (typically 2.5V or 5V)
2 ANALOG IN Analog Analog input (0 to REF+ voltage range)
3 REF- Analog Negative reference voltage input (typically GND)
4 GND Power Ground
5 CS Input Chip select (active LOW, starts conversion on falling edge)
6 DATA OUT Output Serial data output (MSB first, 8 bits per conversion)
7 I/O CLOCK Input Serial clock (shifts out data, up to 2.048MHz)
8 VCC Power Supply (4.75-5.25V)
Application Scenarios: In which products and applications is TLC548CP used
  • Industrial control
  • Consumer electronics
  • Communication equipment
  • Power management
  • Alternative Models: What chips are recommended as replacements for TLC548CP
    Manufacturer Part Number Package Notes
    Texas Instruments TLC549CP DIP-8 Same device, 40kHz sample rate version
    Texas Instruments TLC548ID SOIC-8 Same device, industrial temp, surface-mount
    Maxim MAX1118CPA+ DIP-8 8-bit 100kSPS ADC, SPI, 2.7-5.25V
    Microchip MCP3008-I/P DIP-16 10-bit 8-ch ADC, SPI, 200ksps
    Texas Instruments ADC081S101CIMF SOT-23-6 8-bit 1Msps ADC, SPI, tiny package

    Recommend Parts

    MCP6S26-I

    6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

    Brand: MICROCHIP

    Package: SOIC-14 (150 mils body width)

    IN STOCK: 6800pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    W25Q80VSSI

    8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

    Brand: Winbond

    Package: SOIC-8 208mil (5.3×8.0mm)

    IN STOCK: 4316pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    MM3Z9V1

    9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

    Brand: ON

    Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

    IN STOCK: 10735pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    AT89S51

    8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

    Package: PDIP-40 / TQFP-44 / PLCC-44

    IN STOCK: 15000pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    GD32F303CBT6

    Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

    Brand: gigadevice

    Package: LQFP-48 (7x7mm, 0.5mm pitch)

    IN STOCK: 3342pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    MIC5205-3.3YM5-TR

    3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

    Brand: MICROCHIP

    Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

    IN STOCK: 9858pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1