Opens in a new tab

TXS0104EPWR

4-bit bidirectional level translator, auto-sense, 1.2-3.6V, TSSOP-14

3850

Effective Inventory

Image for reference only

Manufacturer Part:

TXS0104EPWR

Package:

TSSOP-14 (5×4.4mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TXS0104EPWR from TI is a 4-bit bidirectional auto-sensing level translator with 1.2-3.6V on both A and B ports, 110Mbps data rate, and integrated pass-gate architecture in TSSOP-14 for multi-voltage I/O interfacing.

Key Specifications

Channels 4
VCCA 1.2-3.6V
VCCB 1.2-3.6V
Data Rate 110Mbps
Auto-Sense Yes (bidirectional)
Temp -40~85C

Features

  • 4-bit bidirectional level translation
  • Auto-direction sensing (no DIR pin)
  • 1.2-3.6V on both ports
  • 110Mbps data rate
  • Integrated pull-up resistors
  • Open-drain and push-pull compatible

Applications

  • I2C/SPI level shifting
  • SD card interface
  • Multi-voltage GPIO
  • FPGA/MCU interfacing
Product Introduction: TXS0104EPWR Product Introduction

The TXS0104EPWR from TI is a 4-bit bidirectional auto-sensing level translator with 1.2-3.6V on both A and B ports, 110Mbps data rate, and integrated pass-gate architecture in TSSOP-14 for multi-voltage I/O interfacing.

Working Principle: TXS0104EPWR Working Principle

The TXS0104EPWR is a 4-bit bidirectional voltage-level translator from TI in TSSOP-14 with auto-direction sensing. Each channel uses a pass-FET architecture with integrated 10kOhm pull-up resistors on both A and B sides. The pass-FET connects the A and B sides when both are at valid logic levels. When one side is driven LOW, the pass-FET conducts and the other side follows. When both sides are released HIGH, the internal pull-up resistors passively pull both sides to their respective supply rails (VCCA or VCCB). This auto-sense mechanism eliminates the need for direction control pins, making it ideal for open-drain bidirectional buses like I2C, SMBus, and SDIO. The 10kOhm pull-ups limit the maximum data rate to approximately 1-2Mbps for I2C applications. For push-pull signals, the edge-rate accelerators detect rising edges and briefly turn on additional pull-up current to speed the transition. The OE pin (active HIGH, referenced to VCCA) disables all outputs when LOW for power management. The device supports voltage translation between any combination of 1.2V-3.6V (A side) and 1.65V-5.5V (B side).

Pin Description: TXS0104EPWR Pin Definition and Functions
Pin Name Type Function
1 VCCA Power Side A supply (1.2-3.6V)
2 A1 I/O Channel 1 data A-side
3 A2 I/O Channel 2 data A-side
4 A3 I/O Channel 3 data A-side
5 A4 I/O Channel 4 data A-side
6 OE Input Output enable (active high, tied to VCCA)
7 GND Power Ground
8 B1 I/O Channel 1 data B-side
9 B2 I/O Channel 2 data B-side
10 B3 I/O Channel 3 data B-side
11 B4 I/O Channel 4 data B-side
12 VCCB Power Side B supply (1.65-5.5V)
13-14 NC – No connect
Application Scenarios: In which products and applications is TXS0104EPWR used
  • I2C/SPI level shifting
  • SD card interface
  • Multi-voltage GPIO
  • FPGA/MCU interfacing
  • Alternative Models: What chips are recommended as replacements for TXS0104EPWR
    Manufacturer Part Number Package Notes
    Texas Instruments TXS0108EPWR TSSOP-20 8-channel version, same architecture
    NXP 74LVC4245APW TSSOP-24 4-bit translator, directional
    onsemi NLSV4T3234DTR2G QFN-16 4-bit translator, auto-sense
    Texas Instruments TXB0104PWR TSSOP-14 4-bit translator, auto-direction, no pull-up
    Diodes Inc PI4IOE5V9637ZDEX QFN-16 8-bit translator with OE

    Recommend Parts

    MCP6S26-I

    6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

    Brand: MICROCHIP

    Package: SOIC-14 (150 mils body width)

    IN STOCK: 6800pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    W25Q80VSSI

    8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

    Brand: Winbond

    Package: SOIC-8 208mil (5.3×8.0mm)

    IN STOCK: 4316pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    MM3Z9V1

    9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

    Brand: ON

    Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

    IN STOCK: 10735pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    AT89S51

    8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

    Package: PDIP-40 / TQFP-44 / PLCC-44

    IN STOCK: 15000pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    GD32F303CBT6

    Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

    Brand: gigadevice

    Package: LQFP-48 (7x7mm, 0.5mm pitch)

    IN STOCK: 3342pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    MIC5205-3.3YM5-TR

    3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

    Brand: MICROCHIP

    Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

    IN STOCK: 9858pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1