Opens in a new tab

ISO3080DWR

Isolated RS-485 transceiver, 1Mbps, 2500Vrms, SOIC-16W

4917

Effective Inventory

Image for reference only

Manufacturer Part:

ISO3080DWR

Package:

SOIC-16W (10.3×7.5mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The ISO3080DWR from TI is an isolated RS-485 transceiver with 1Mbps data rate, 2500Vrms galvanic isolation, and full/half-duplex operation in SOIC-16W for industrial communication.

Key Specifications

Package SOIC-16W (10.3×7.5mm)

Features

  • See datasheet for complete specifications
  • Industry-standard package

Applications

  • Industrial control
  • Consumer electronics
  • Communication equipment
  • Power management
Product Introduction: ISO3080DWR Product Introduction

The ISO3080DWR from TI is an isolated RS-485 transceiver with 1Mbps data rate, 2500Vrms galvanic isolation, and full/half-duplex operation in SOIC-16W for industrial communication.

Working Principle: ISO3080DWR Working Principle

The ISO3080DWR is an isolated RS-485 transceiver from TI in SOIC-16W with 2500Vrms isolation and 1Mbps data rate. It integrates a standard RS-485 transceiver with capacitive digital isolation between the logic side (VCC1/GND1) and bus side (VCC2/GND2). The isolation barrier uses silicon dioxide (SiO2) dielectric between capacitive coupler plates, providing 2500Vrms withstand voltage. Data from the MCU (DI pin, logic side) is encoded into high-frequency pulses, coupled across the isolation barrier, decoded on the bus side, and driven onto the A/B bus lines. Conversely, received bus data is coupled back across the barrier and presented on the RO pin. The two independent supplies (VCC1 and VCC2) can be at different voltages (3.3V logic, 5V bus), providing level translation across the isolation barrier. The DE/RE control signals are also isolated, allowing the MCU to control bus direction from the isolated side. The 1Mbps data rate supports standard RS-485 communication up to 1200m. Fail-safe biasing ensures RO is HIGH when the bus is idle. The device supports up to 160 nodes on the bus.

Pin Description: ISO3080DWR Pin Definition and Functions
Pin Name Type Function
1 VCC1 Power Logic side supply (3.0-5.5V)
2 RO Output Receiver output (to MCU UART RX)
3 DE Input Driver enable (active high)
4 DI Input Driver input (from MCU UART TX)
5 GND1 Power Logic side ground
6-7 NC – No connect
8 GND2 Power Bus side ground
9 A I/O Non-inverting bus pin
10 B I/O Inverting bus pin
11-14 NC/VCC2 Power No connect / Bus side supply (4.75-5.25V)
15-16 NC – No connect
Application Scenarios: In which products and applications is ISO3080DWR used
  • Industrial control
  • Consumer electronics
  • Communication equipment
  • Power management
  • Alternative Models: What chips are recommended as replacements for ISO3080DWR
    Manufacturer Part Number Package Notes
    TI ISO3086DWR SOIC-16W 20Mbps version of same family
    TI ISO3531DR SOIC-16 Isolated RS-485, 3.3V, 1Mbps
    Analog Devices ADM2486EBRWZ SOIC-16W Isolated RS-485, 20Mbps, 2.5kV
    Silicon Labs Si8631AB-B-IS1 SOIC-16 Digital isolator + external transceiver
    Maxim MAX14850ASE+ SOIC-16 Isolated RS-485, 25Mbps, 600Vrms

    Recommend Parts

    MCP6S26-I

    6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

    Brand: MICROCHIP

    Package: SOIC-14 (150 mils body width)

    IN STOCK: 6800pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    W25Q80VSSI

    8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

    Brand: Winbond

    Package: SOIC-8 208mil (5.3×8.0mm)

    IN STOCK: 4316pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    MM3Z9V1

    9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

    Brand: ON

    Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

    IN STOCK: 10735pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    AT89S51

    8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

    Package: PDIP-40 / TQFP-44 / PLCC-44

    IN STOCK: 15000pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    GD32F303CBT6

    Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

    Brand: gigadevice

    Package: LQFP-48 (7x7mm, 0.5mm pitch)

    IN STOCK: 3342pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    MIC5205-3.3YM5-TR

    3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

    Brand: MICROCHIP

    Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

    IN STOCK: 9858pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1