Opens in a new tab

LM2903AVQDR

Automotive dual differential comparator, AEC-Q100 Grade 1, 2-32V supply, 2mV offset (A-grade), SOIC-8, -40°C to +125°C

6000

Effective Inventory

Image for reference only

Manufacturer Part:

LM2903AVQDR

Package:

SOIC-8 (D) 4.90mm x 3.91mm

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The LM2903AVQDR from Texas Instruments is an automotive-qualified dual differential comparator in an 8-pin SOIC package. It features AEC-Q100 Grade 1 qualification with extended operating temperature range of -40°C to +125°C, low input offset voltage of 2mV (A-grade), and open-collector output compatible with TTL, MOS, and CMOS logic levels.

Key Specifications

Number of Comparators 2
Supply Voltage Range 2V to 32V
Input Offset Voltage (A-grade) 2mV max at 25°C
Input Bias Current 250nA max
Response Time 1.3μs (typical)
Output Type Open-collector
Supply Current 1mA per comparator (typical)
Operating Temperature -40°C to +125°C
Qualification AEC-Q100 Grade 1
Package SOIC-8 (D)

Features

  • AEC-Q100 Grade 1 qualified for automotive applications
  • Low input offset voltage: 2mV (A-grade, 25°C)
  • Common-mode input voltage range includes ground
  • Differential input voltage equal to maximum supply rating
  • Open-collector output for wired-OR configurations
  • Low supply current independent of supply voltage
  • Single or dual supply operation

Applications

  • Automotive body control modules
  • Battery management systems
  • Motor drive current sensing
  • Window comparators for over/under voltage detection
  • HEV/EV powertrain control
Product Introduction: LM2903AVQDR Product Introduction

The LM2903AVQDR is a dual differential comparator from Texas Instruments qualified to AEC-Q100 Grade 1 standards for automotive applications. It consists of two independent voltage comparators designed to operate from a single power supply over a wide range of voltages from 2V to 32V. The A-grade device features a maximum input offset voltage of 2mV at 25°C, providing improved accuracy for precision threshold detection. The open-collector output configuration allows wired-OR connections for multi-channel monitoring. The device maintains stable performance across the full automotive temperature range of -40°C to +125°C, making it suitable for under-hood and cabin electronics.

Working Principle: LM2903AVQDR Working Principle

The LM2903AVQDR consists of two independent comparators, each comparing two input voltages and producing an output that indicates which input is larger. The non-inverting input (+) is compared against the inverting input (-). When the voltage at the non-inverting input exceeds the inverting input, the internal output transistor turns off (open-collector), allowing an external pull-up resistor to pull the output high. Conversely, when the inverting input is higher, the output transistor turns on, pulling the output low. The open-collector architecture enables wired-OR connections where multiple comparator outputs share a single pull-up resistor, creating an OR logic function for multi-threshold monitoring without additional logic gates.

Pin Description: LM2903AVQDR Pin Definition and Functions
Pin Name Description
1 1OUT Output of comparator 1 (open-collector)
2 1IN- Inverting input of comparator 1
3 1IN+ Non-inverting input of comparator 1
4 GND Ground (negative supply)
5 2IN+ Non-inverting input of comparator 2
6 2IN- Inverting input of comparator 2
7 2OUT Output of comparator 2 (open-collector)
8 VCC Positive supply voltage (2V to 32V)
Application Scenarios: In which products and applications is LM2903AVQDR used
  • Battery Management: Monitors cell voltage against overcharge/over-discharge thresholds in automotive battery packs
  • Motor Drive Protection: Detects overcurrent conditions by comparing current-sense voltage against reference threshold
  • Window Comparator: Both comparators form over/under voltage window detector for power supply supervision
  • Automotive Body Control: Senses switch states and signal thresholds in lighting, wiper, and door control modules
Alternative Models: What chips are recommended as replacements for LM2903AVQDR
Model Manufacturer Offset Qualification Package
LM2903AVQDRG4Q1 Texas Instruments 2mV AEC-Q100 SOIC-8
LM2903BQDRQ1 Texas Instruments 0.37mV AEC-Q100 SOIC-8
LM393DT STMicroelectronics 5mV Industrial SOIC-8
NCV2903DR2G onsemi 5mV AEC-Q100 SOIC-8
TLC393CDR Texas Instruments 5mV Industrial SOIC-8

Recommend Parts

MCP6S26-I

6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

Brand: MICROCHIP

Package: SOIC-14 (150 mils body width)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MM3Z9V1

9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

Brand: ON

Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

IN STOCK: 10735pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT89S51

8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

Package: PDIP-40 / TQFP-44 / PLCC-44

IN STOCK: 15000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

GD32F303CBT6

Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

Brand: gigadevice

Package: LQFP-48 (7x7mm, 0.5mm pitch)

IN STOCK: 3342pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MIC5205-3.3YM5-TR

3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

Brand: MICROCHIP

Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

IN STOCK: 9858pcs

Cargo cycle: 3-7 Days

The minimum order is 1