Opens in a new tab

LM224DR

Quad 30V 1.2MHz general-purpose op-amp in SOIC-14, -25C to 85C industrial temp range

12711

Effective Inventory

Image for reference only

Manufacturer Part:

LM224DR

Package:

SOIC-14 (8.65 x 3.91 x 1.75mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The LM224DR from Texas Instruments is a quad general-purpose operational amplifier designed for industrial applications. It features four independent high-gain op-amps in a SOIC-14 package, operating from a single supply up to 32V with a gain bandwidth product of 1.2 MHz.

Key Specifications

Number of Channels 4
Supply Voltage Range 3V to 32V (single) or +/-1.5V to +/-16V (dual)
Gain Bandwidth Product 1.2 MHz
Slew Rate 0.5 V/us
Input Offset Voltage 2 mV (typ), 5 mV (max)
Input Bias Current 45 nA (typ)
Supply Current (per amp) 350 uA (typ)
CMRR 70 dB (min)
Operating Temperature -25 to 85 C
Package SOIC-14

Features

  • Four independent op-amps in a single package
  • ESD protection of 2 kV (HBM)
  • Low input offset voltage of 2 mV typical
  • Wide supply voltage range from 3V to 32V
  • Short-circuit protected outputs

Applications

  • Transducer amplifier circuits
  • DC gain blocks and active filters
  • Industrial signal conditioning
  • Buffer and follower circuits
  • Analog computation and instrumentation
Product Introduction: LM224DR Product Introduction

The LM224DR is a quad operational amplifier from Texas Instruments, consisting of four independent high-gain internally frequency compensated operational amplifiers. Designed to operate from a single power supply over a wide range of voltages (3V to 32V), it can also operate from split supplies. The device features low power consumption, making it suitable for battery-powered applications. Each amplifier has a typical gain bandwidth product of 1.2 MHz and a slew rate of 0.5 V/us, providing adequate performance for most general-purpose signal conditioning applications.

Working Principle: LM224DR Working Principle

The LM224DR integrates four independent op-amps, each employing a standard voltage-feedback architecture. **Input Stage**: A differential pair with PNP transistors provides the wide common-mode input range that includes ground (in single-supply operation). The input bias current is typically 45 nA flowing out of the input pins. **Gain Stage**: A high-gain voltage amplifier stage with internal compensation capacitor provides a gain-bandwidth product of 1.2 MHz and ensures unconditional stability with unity-gain feedback. **Output Stage**: A Class AB push-pull output stage can source and sink tens of milliamps, with short-circuit current limiting. The output swings to within approximately 1.5V of the negative rail under load. **Bias Network**: A shared bias network across all four amplifiers minimizes total quiescent current.

Pin Description: LM224DR Pin Definition and Functions
Pin Name Description
1 OUT A Channel A Output
2 IN- A Channel A Inverting Input
3 IN+ A Channel A Non-Inverting Input
4 VCC Positive Supply Voltage
5 IN+ B Channel B Non-Inverting Input
6 IN- B Channel B Inverting Input
7 OUT B Channel B Output
8 OUT C Channel C Output
9 IN- C Channel C Inverting Input
10 IN+ C Channel C Non-Inverting Input
11 GND / VEE Negative Supply / Ground
12 IN+ D Channel D Non-Inverting Input
13 IN- D Channel D Inverting Input
14 OUT D Channel D Output
Application Scenarios: In which products and applications is LM224DR used
  • Signal Conditioning: Low-frequency transducer amplifiers for sensor interfaces in industrial control
  • Active Filters: Multiple 2nd-order filter stages using a single IC for audio or instrumentation
  • DC Gain Blocks: Instrumentation front-end amplifiers with single-supply operation down to 3V
  • Comparators: Open-loop voltage comparison for threshold detection in monitoring circuits
  • Oscillators: RC oscillators and waveform generators for timing and clock generation
Alternative Models: What chips are recommended as replacements for LM224DR
Model Manufacturer Key Difference
LM324DR TI Extended temp range 0C to 70C
LM2902DR TI Automotive grade, -40C to 125C
MCP6004T-I/SL Microchip RRIO, 1.8V-6V, lower power
TLV274IPWR TI RRIO, 2.7V-16V, 3MHz GBW
OPA4340UA TI RRIO, 2.5V-5.5V, 5.5MHz GBW

Recommend Parts

MCP6S26-I

6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

Brand: MICROCHIP

Package: SOIC-14 (150 mils body width)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MM3Z9V1

9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

Brand: ON

Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

IN STOCK: 10735pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT89S51

8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

Package: PDIP-40 / TQFP-44 / PLCC-44

IN STOCK: 15000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

GD32F303CBT6

Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

Brand: gigadevice

Package: LQFP-48 (7x7mm, 0.5mm pitch)

IN STOCK: 3342pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MIC5205-3.3YM5-TR

3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

Brand: MICROCHIP

Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

IN STOCK: 9858pcs

Cargo cycle: 3-7 Days

The minimum order is 1