Opens in a new tab

OPA2170AIDCUR

Precision low-noise dual op-amp, 3MHz GBW, ±100µV Vos, 8nV/√Hz, VSSOP-8

4661

Effective Inventory

Image for reference only

Manufacturer Part:

OPA2170AIDCUR

Package:

VSSOP-8 (DCU, 2.3x2mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The OPA2170AIDCUR from Texas Instruments is a precision, low-noise, rail-to-rail output dual operational amplifier with 3MHz GBW and ±100µV offset voltage. Operating from 4V to 36V supply, it features 8nV/√Hz noise and 10pA bias current in a VSSOP-8 (2.3x2mm) package.

Key Specifications

Supply Range 4V – 36V (±2V to ±18V)
Offset Voltage ±100µV (typ), ±500µV (max)
Gain Bandwidth Product 3MHz
Slew Rate 1.5V/µs
Input Noise 8nV/√Hz @1kHz
Input Bias Current 10pA (typ)
Supply Current 1.5mA per amplifier
Operating Temperature -40°C to +125°C
Package VSSOP-8 (DCU, 2.3x2mm)

Features

  • Ultra-low offset voltage of ±100µV for precision applications
  • Rail-to-rail output for maximum dynamic range
  • 8nV/√Hz low noise for sensitive signal conditioning
  • 10pA bias current suitable for high-impedance sensors
  • Wide 4V-36V supply range for single or dual supply
  • EMI-filtered inputs for industrial noise immunity

Applications

  • Precision instrumentation and measurement
  • Medical equipment signal conditioning
  • Transimpedance amplifiers for photodiodes
  • Bridge sensor and strain gauge interfaces
Product Introduction: OPA2170AIDCUR Product Introduction

The OPA2170AIDCUR is a precision, low-noise, rail-to-rail output dual operational amplifier from Texas Instruments. Combining ±100µV offset voltage, 8nV/√Hz input voltage noise, and 10pA bias current, it delivers outstanding precision for signal conditioning in measurement and medical applications. The rail-to-rail output stage maximizes dynamic range, while the 4V-36V supply range supports both single-supply and split-supply configurations.

Working Principle: OPA2170AIDCUR Working Principle

The OPA2170AIDCUR uses a complementary bipolar input stage with chopper-free architecture to achieve ±100µV typical offset voltage without the clock noise associated with zero-drift amplifiers. The rail-to-rail output stage uses a common-emitter configuration that swings to within millivolts of the supply rails, maximizing output dynamic range. The 3MHz gain bandwidth and 1.5V/µs slew rate provide adequate bandwidth for precision signal conditioning up to the 100kHz range. EMI filtering on the inputs rejects high-frequency interference common in industrial environments.

Pin Description: OPA2170AIDCUR Pin Definition and Functions
Pin Name Description
1 1OUT Amplifier 1 output
2 1IN- Amplifier 1 inverting input
3 1IN+ Amplifier 1 non-inverting input
4 V- Negative supply or ground
5 2IN+ Amplifier 2 non-inverting input
6 2IN- Amplifier 2 inverting input
7 2OUT Amplifier 2 output
8 V+ Positive supply
Application Scenarios: In which products and applications is OPA2170AIDCUR used
  • Precision instrumentation amplifiers for bridge sensors
  • Medical ECG/EEG signal conditioning front-ends
  • Transimpedance amplifiers for photodiode receivers
  • Strain gauge and load cell interface circuits
Alternative Models: What chips are recommended as replacements for OPA2170AIDCUR
Model Manufacturer Vos GBW Noise
OPA2171AIDCUR TI ±500µV 3MHz 8nV/√Hz
OPA2227PA TI ±5µV 8MHz 3.8nV/√Hz
AD8606ARMZ ADI ±50µV 10MHz 8nV/√Hz
MCP6022-I/SN Microchip ±500µV 10MHz 8.7nV/√Hz

Recommend Parts

MCP6S26-I

6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

Brand: MICROCHIP

Package: SOIC-14 (150 mils body width)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MM3Z9V1

9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

Brand: ON

Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

IN STOCK: 10735pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT89S51

8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

Package: PDIP-40 / TQFP-44 / PLCC-44

IN STOCK: 15000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

GD32F303CBT6

Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

Brand: gigadevice

Package: LQFP-48 (7x7mm, 0.5mm pitch)

IN STOCK: 3342pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MIC5205-3.3YM5-TR

3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

Brand: MICROCHIP

Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

IN STOCK: 9858pcs

Cargo cycle: 3-7 Days

The minimum order is 1