Opens in a new tab

LMV358IDGKR

Dual 2.7-5.5V R-R output op-amp, 1MHz GBW, 210µA/ch, VSSOP-8

14370

Effective Inventory

Image for reference only

Manufacturer Part:

LMV358IDGKR

Package:

VSSOP-8 (3.00 x 4.90 mm, DGK)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The LMV358IDGKR from Texas Instruments is a dual low-voltage (2.7V to 5.5V) rail-to-rail output operational amplifier in a VSSOP-8 (DGK) package. With 1MHz gain bandwidth, 1V/µs slew rate, and only 210µA supply current per amplifier, it provides cost-effective solutions for space-constrained low-voltage designs.

Key Specifications

Number of Channels 2
Supply Voltage Range 2.7V to 5.5V
Gain Bandwidth Product 1MHz
Slew Rate 1V/µs
Input Offset Voltage 7mV (max at 25°C)
Input Bias Current 250nA (max)
CMRR 65dB (typical)
Supply Current 210µA/ch (typical)
Operating Temperature -40°C to +125°C
Package VSSOP-8 (DGK)

Features

  • Rail-to-rail output swing
  • Input common-mode range includes ground
  • Low supply current: 210µA per amplifier
  • No crossover distortion
  • ESD protection: 2000V HBM, 1000V CDM
  • Upgrade path to LMV358A (4mV Vos)

Applications

  • Portable instrumentation
  • Low-voltage signal conditioning
  • Active filters
  • Consumer audio
  • IoT sensor interfaces
Product Introduction: LMV358IDGKR Product Introduction

The LMV358IDGKR is a dual low-voltage rail-to-rail output operational amplifier from Texas Instruments in a compact VSSOP-8 (DGK) package. Designed specifically for 2.7V to 5.5V single-supply operation, it meets or exceeds the performance of the industry-standard LM358 and LM324 devices that require 5V to 30V supplies. The rail-to-rail output swing maximizes dynamic range in low-voltage systems, while the input common-mode range includes ground. The device features no crossover distortion for clean audio signal handling. With 1MHz GBW and 210µA per-amplifier supply current, the LMV358 is well-suited for portable and battery-powered applications.

Working Principle: LMV358IDGKR Working Principle

The LMV358IDGKR uses a bipolar input stage designed for low-voltage operation with rail-to-rail output capability. The input common-mode range extends from -0.2V below the negative rail to approximately 0.8V below the positive rail, accommodating ground-referenced signals in single-supply configurations. The output stage uses a complementary push-pull architecture that swings within approximately 65mV of the negative rail and 120mV of the positive rail at light loads. The absence of crossover distortion ensures smooth transition between sourcing and sinking output current. Each amplifier draws only 210µA typical supply current. The 1MHz gain bandwidth product and 1V/µs slew rate support moderate-frequency signal processing.

Pin Description: LMV358IDGKR Pin Definition and Functions
Pin Name Type Description
1 OUT A Output Channel A output
2 -IN A Input Channel A inverting input
3 +IN A Input Channel A non-inverting input
4 GND Power Negative supply / ground
5 +IN B Input Channel B non-inverting input
6 -IN B Input Channel B inverting input
7 OUT B Output Channel B output
8 V+ Power Positive supply (2.7V to 5.5V)
Application Scenarios: In which products and applications is LMV358IDGKR used
  • Portable Sensor Interface: Conditions low-voltage sensor signals in battery-powered instruments with rail-to-rail output maximizing ADC dynamic range
  • Active Filter for IoT: Implements anti-aliasing filters in IoT nodes with 1MHz GBW supporting cutoffs up to ~100kHz
  • Consumer Audio Preamp: Provides crossover-distortion-free amplification for headphone or speaker preamps in 3.3V or 5V systems
Alternative Models: What chips are recommended as replacements for LMV358IDGKR
Model Manufacturer VOS GBW Key Difference
LMV358AIDGKR TI 4mV 1MHz Upgraded version, lower noise
LM358BIDR TI 3mV 1.2MHz Higher voltage (36V), SOIC-8
MCP6002-I/SN Microchip 7mV 1MHz Similar specs, SOIC-8
TSV912AIDT ST 3mV 8MHz Higher GBW, R-R I/O

Recommend Parts

MCP6S26-I

6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

Brand: MICROCHIP

Package: SOIC-14 (150 mils body width)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MM3Z9V1

9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

Brand: ON

Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

IN STOCK: 10735pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT89S51

8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

Package: PDIP-40 / TQFP-44 / PLCC-44

IN STOCK: 15000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

GD32F303CBT6

Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

Brand: gigadevice

Package: LQFP-48 (7x7mm, 0.5mm pitch)

IN STOCK: 3342pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MIC5205-3.3YM5-TR

3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

Brand: MICROCHIP

Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

IN STOCK: 9858pcs

Cargo cycle: 3-7 Days

The minimum order is 1