Opens in a new tab

MIC5205-3.3YM5

150mA LDO, fixed 3.3V, 165mV dropout, low noise, SOT-23-5

35000

Effective Inventory

Image for reference only

Manufacturer Part:

MIC5205-3.3YM5

Package:

SOT-23-5 (2.90 x 1.60 x 1.10 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The MIC5205-3.3YM5 from Microchip is a 150mA low-noise LDO linear voltage regulator with a fixed 3.3V output in a SOT-23-5 package. With an ultra-low dropout voltage of 165mV at 150mA and only 680nA quiescent current in shutdown, it is ideal for battery-powered and noise-sensitive applications.

Key Specifications

Output Voltage 3.3V (fixed)
Output Current 150mA (max)
Dropout Voltage 165mV (typ at 150mA)
Input Voltage 2.5V to 16V
Quiescent Current 1.5mA (typ, operating)
Shutdown Current 680nA (typ)
Output Noise 30uVrms (typ, 10Hz-100kHz)
PSRR 70dB at 1kHz
Operating Temperature -40C to +125C
Package SOT-23-5

Features

  • Ultra-low dropout: 165mV at 150mA
  • Low noise: 30uVrms
  • High PSRR: 70dB at 1kHz
  • 680nA shutdown current
  • Reverse-battery protection
  • Current limiting and thermal shutdown
  • NO CAP (stable without output capacitor)
  • Enable/shutdown pin

Applications

  • RF and wireless modules
  • Audio preamplifiers
  • Battery-powered instruments
  • IoT sensor nodes
  • Low-noise analog circuits
Product Introduction: MIC5205-3.3YM5 Product Introduction

The MIC5205-3.3YM5 from Microchip is a 150mA low-noise LDO regulator with fixed 3.3V output in a tiny SOT-23-5 package. It features an ultra-low dropout voltage of 165mV at full 150mA load, allowing operation from inputs as low as 3.465V. The device achieves exceptionally low output noise of 30uVrms and high PSRR of 70dB at 1kHz, making it ideal for RF and audio applications. The 680nA shutdown current extends battery life in portable devices. The enable pin provides on/off control, and the device is stable without an output capacitor. Reverse-battery protection and thermal shutdown ensure robustness.

Working Principle: MIC5205-3.3YM5 Working Principle

The MIC5205-3.3YM5 uses a P-channel MOSFET pass element in a low-dropout configuration. The P-MOSFET gate is driven by the error amplifier which compares the output voltage (through an internal divider for the fixed version) with an internal bandgap reference. The MOSFET pass element allows very low dropout (165mV) because the gate can be driven to ground potential, fully enhancing the transistor. The low output noise of 30uVrms is achieved by the clean bandgap reference and careful layout. The 70dB PSRR at 1kHz rejects input supply ripple and noise. The enable pin controls a bias circuit that shuts down all internal circuitry, reducing current to 680nA. The NO CAP stability (no output capacitor required) results from the internal compensation network.

Pin Description: MIC5205-3.3YM5 Pin Definition and Functions
Pin Name Type Description
1 IN Input Input supply voltage (2.5V to 16V)
2 GND Ground Ground
3 EN Input Enable; HIGH = on, LOW = shutdown
4 NC – No connect (or BYP for noise reduction)
5 OUT Output 3.3V regulated output
Application Scenarios: In which products and applications is MIC5205-3.3YM5 used
  • RF Module Power: Provides clean 3.3V to Wi-Fi/BLE modules with 30uVrms noise and 70dB PSRR preventing supply noise from degrading receiver sensitivity
  • Audio Preamp Supply: Powers low-noise op-amp circuits with ultra-clean 3.3V rail where switching regulator ripple would compromise SNR
  • IoT Sensor Node: Extends coin-cell battery life with 680nA shutdown between measurement intervals and 165mV dropout maximizing usable battery range
Alternative Models: What chips are recommended as replacements for MIC5205-3.3YM5
Model Manufacturer Vout Iout Key Difference
MIC5205-5.0YM5 Microchip 5.0V 150mA Fixed 5V version
RT9193-33GB Richtek 3.3V 300mA Higher current, SOT-23-5
ME6211C33M5G Microne 3.3V 500mA Higher current, SOT-23-5
TPS79333DBVR TI 3.3V 150mA Lower noise, higher cost

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1