Opens in a new tab

MAX998EUT+T

Single high-speed comparator, 28ns prop delay, push-pull R-R output, 2.7V-5.5V, SOT-23-6, 5mV hysteresis

4156

Effective Inventory

Image for reference only

Manufacturer Part:

MAX998EUT+T

Package:

SOT-23-6

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The MAX998EUT+T is a single-channel, high-speed, low-power comparator from Analog Devices (formerly Maxim Integrated). Operating from a single 2.7V to 5.5V supply, it features a push-pull rail-to-rail output with only 28ns propagation delay. Housed in a tiny SOT-23-6 package, it draws just 650µA max supply current while delivering 95dB CMRR and 100dB PSRR, making it ideal for portable and space-constrained comparator applications.

Key Specifications

Type General Purpose Comparator
Number of Comparators 1
Supply Voltage 2.7V to 5.5V
Input Offset Voltage 2mV max @ 5V
Input Bias Current 0.075µA max @ 5.5V
Supply Current 650µA max
CMRR 95dB (typ)
PSRR 100dB (typ)
Propagation Delay 28ns max
Hysteresis 5mV
Output Type Push-Pull, Rail-to-Rail
Package SOT-23-6
Operating Temperature -40°C to +85°C

Features

  • 28ns propagation delay for high-speed applications
  • Rail-to-rail push-pull output — no pull-up resistor needed
  • 2.7V to 5.5V single-supply operation
  • Low input bias current: 75nA max
  • 5mV internal hysteresis prevents output chatter
  • 95dB CMRR and 100dB PSRR for noise rejection
  • Ultra-small SOT-23-6 package

Applications

  • High-speed level detection and threshold comparison
  • Zero-crossing detection in AC line monitoring
  • Battery voltage monitoring and low-battery detection
  • Window comparator circuits
  • IR receiver front-end signal conditioning
  • Sensor signal threshold detection
Product Introduction: MAX998EUT+T Product Introduction

The MAX998EUT+T is a single-channel, general-purpose comparator from Analog Devices/Maxim Integrated. It operates from a single 2.7V to 5.5V supply and features a push-pull rail-to-rail output that eliminates the need for an external pull-up resistor. With a maximum propagation delay of only 28ns, it responds quickly to input transitions. The internal 5mV hysteresis prevents output oscillation near the switching threshold. The device draws just 650µA maximum supply current, making it suitable for battery-powered applications. High CMRR (95dB) and PSRR (100dB) ensure reliable operation in noisy environments.

Working Principle: MAX998EUT+T Working Principle

The MAX998 compares the voltage at its non-inverting input (IN+) against the inverting input (IN-). When IN+ exceeds IN- by more than the input offset voltage plus hysteresis, the output drives to the positive rail. When IN- exceeds IN+ by the same margin, the output drives to the negative rail (ground). The push-pull output stage actively drives both high and low states, unlike open-drain comparators that require an external pull-up resistor. The 5mV internal hysteresis creates a small voltage window around the switching threshold, preventing multiple output transitions when the input signal is slow or noisy.

Pin Description: MAX998EUT+T Pin Definition and Functions
Pin Name Description
1 OUT Push-pull rail-to-rail output
2 VSS (GND) Ground / negative supply
3 IN+ Non-inverting input
4 IN- Inverting input
5 VCC Positive supply (2.7V to 5.5V)
6 NC No connect
Application Scenarios: In which products and applications is MAX998EUT+T used
  • Low-Battery Detection: Connect IN- to a reference voltage derived from VCC via resistor divider, and IN+ to the battery voltage. When battery drops below threshold, the output transitions low, triggering a low-battery indicator or shutdown sequence. The push-pull output directly drives an LED or MCU GPIO without a pull-up resistor.
  • Zero-Crossing Detection: For AC line monitoring, connect IN+ to the rectified AC signal through a current-limiting resistor and IN- to ground. The 28ns propagation delay enables precise zero-cross timing for TRIAC dimming or relay control applications.
  • Window Comparator: Use two MAX998 devices with different reference thresholds to create a window comparator. The outputs feed an AND gate to indicate when the input signal is within the acceptable voltage range, useful for power supply monitoring and fault detection.
Alternative Models: What chips are recommended as replacements for MAX998EUT+T
Model Channels Prop Delay Supply Key Difference
MAX997EUT+T 1 40ns 2.7-5.5V Open-drain output variant
MAX9031AUK+T 1 40ns 2.7-5.5V Includes 1.236V reference
TS861ILT 1 28ns 2.7-10V ST alternative, wider supply
TLV3201AIDBVR 1 40ns 2.7-5.5V TI alternative with push-pull output

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1