Opens in a new tab

AD8226ARZ

Wide-supply in-amp, 2.2-36V, G=1-1000, 90dB CMRR, R-R output, ±35V OVP, 350µA, 8-SOIC

4560

Effective Inventory

Image for reference only

Manufacturer Part:

AD8226ARZ

Package:

8-SOIC (3.9 x 4.9 x 1.5mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The AD8226ARZ is a low-cost, wide-supply-range instrumentation amplifier from Analog Devices with rail-to-rail output. Operating from a single 2.2V to 36V supply (or dual ±1.35V to ±18V), it sets gain from 1 to 1000 with one external resistor. The input range extends below the negative supply, and inputs tolerate ±35V beyond the rails with ±5V supplies. With 90dB CMRR (B grade), 1.5MHz bandwidth, and 350µA supply current, it is ideal for industrial and portable multi-channel applications.

Key Specifications

Gain Range 1 to 1000 (single resistor)
Supply Voltage 2.2V to 36V single, ±1.35V to ±18V dual
Bandwidth (G=1) 1.5 MHz
CMRR (G=1, B grade) 90 dB minimum
Input Voltage Noise 22 nV/√Hz
Supply Current 350 µA (typical)
Input Offset Voltage 125/50 µV (A/B grade max at ±15V)
Input Overvoltage ±35V beyond supplies (with ±5V supply)
Output Type Rail-to-Rail
Input Range Extends below negative supply
Package 8-SOIC (3.9 x 4.9mm)
Operating Temperature -40°C to +125°C

Features

  • Wide supply range: 2.2V to 36V single supply
  • Gain of 1 to 1000 with one external resistor
  • Rail-to-rail output for maximum dynamic range
  • Input voltage extends below negative supply
  • Input overvoltage protection to ±35V beyond rails
  • 90 dB minimum CMRR (B grade)
  • Only 350µA supply current
  • Minimum gain of 1 handles ±10V signals
  • Minimum and maximum input bias currents specified for open-wire detection
  • Available in SOIC and MSOP packages

Applications

  • Industrial process control
  • Bridge amplifiers for load cells and pressure sensors
  • Medical instrumentation
  • Portable data acquisition
  • Multi-channel signal conditioning
  • Single-supply sensor interfaces
Product Introduction: AD8226ARZ Product Introduction

The AD8226ARZ is a low-cost, wide-supply-range instrumentation amplifier from Analog Devices that requires only one external resistor to set any gain from 1 to 1000. Its wide input range extends below the negative supply, enabling single-supply amplification of near-ground signals without level shifting. The rail-to-rail output maximizes dynamic range. Input protection tolerates voltages up to ±35V beyond the supply rails (with ±5V supplies), making it robust in industrial environments with transient overvoltages. The minimum gain of 1 allows direct handling of ±10V signals without attenuation. With only 350µA supply current and operation from 2.2V to 36V, the AD8226 suits both battery-powered portables and industrial 24V systems. Open-wire detection is facilitated by specified minimum and maximum input bias currents.

Working Principle: AD8226ARZ Working Principle

The AD8226 uses an indirect current-feedback architecture. Unlike traditional three-op-amp in-amps, the input stage converts the differential input voltage to a current through a transconductance amplifier. This current is mirrored to the output stage where it is converted back to a voltage through a feedback amplifier. The gain-setting resistor RG determines the transconductance ratio: G = 1 + (49.4kΩ/RG). The indirect current-feedback topology provides several advantages: the input common-mode range is independent of the gain and reference voltage, the output can swing rail-to-rail, and the input can extend below the negative supply. The input protection uses series resistors and clamp diodes to tolerate voltages well beyond the supply rails without damage. The REF pin adds a DC offset to the output, useful for level-shifting in single-supply applications.

Pin Description: AD8226ARZ Pin Definition and Functions
Pin Name Description
1 -IN Inverting input
2 RG Gain resistor terminal 1
3 RG Gain resistor terminal 2
4 +IN Non-inverting input
5 -VS Negative supply (or GND for single supply)
6 REF Reference (output offset) input
7 VOUT Amplifier output (rail-to-rail)
8 +VS Positive supply (2.2V to 36V)
Application Scenarios: In which products and applications is AD8226ARZ used
  • Single-Supply Bridge Amplifier: Connect a 350Ω load cell excited by 5V to the AD8226 powered from a single 5V supply. The input range extends below ground, so the bridge output near 2.5V common-mode is well within range. Set G=100 with RG = 499Ω. The rail-to-rail output swings from near 0V to near 5V, maximizing ADC dynamic range. The ±35V input overvoltage protects against ESD and miswiring during installation.
  • 24V Industrial 4-20mA Loop Receiver: Use the AD8226 to sense the voltage across a precision shunt resistor in a 4-20mA current loop. The 36V maximum supply allows direct operation from the 24V loop supply. The input below-ground capability handles ground-loop offsets. The 90dB CMRR rejects common-mode noise on the loop.
  • Multi-Channel Portable Data Acquisition: At only 350µA per channel, eight AD8226 channels draw less than 3mA total — negligible in a battery-powered data logger. The MSOP package option (AD8226ARMZ) saves board space. The specified minimum bias current allows detection of open sensor wires by monitoring for zero bias current.
Alternative Models: What chips are recommended as replacements for AD8226ARZ
Model Supply Range Gain Range IQ Key Difference
AD8227BRZ ±1.35-18V 5-1000 350µA Same family, min gain = 5
AD623ARZ ±1.35-18V 1-1000 375µA Predecessor, lower CMRR
INA826EA 2.7-36V 1-1000 200µA TI, lower IQ, similar specs
INA333AIDR 1.8-5.5V 1-1000 50µA TI, zero-drift, low IQ, low Vin

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1