Opens in a new tab

INA828AIDR

50µV offset, 7nV/√Hz in-amp, 140dB CMRR, ±40V OVP, G=1-1000, 650µA, super-beta, 8-SOIC

5600

Effective Inventory

Image for reference only

Manufacturer Part:

INA828AIDR

Package:

8-SOIC (4.9 x 3.9 x 1.5mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The INA828AIDR is a high-precision instrumentation amplifier from Texas Instruments with 50µV max offset, 7nV/√Hz noise, and 0.5µV/°C offset drift — achieved through super-beta input transistors. With 140dB CMRR at G=10, ±40V input overvoltage protection, and only 650µA supply current, it is the second-generation upgrade to the classic INA128. The single-resistor gain range (1 to 1000) and 8-SOIC package suit precision industrial and medical applications.

Key Specifications

Input Offset Voltage 50 µV maximum
Offset Drift 0.5 µV/°C maximum
Input Voltage Noise 7 nV/√Hz @ 1kHz
0.1-10Hz Noise 0.14 µVp-p (G=1)
CMRR (G=1) 90 dB minimum
CMRR (G=10) 110 dB minimum
PSRR (G=1) 100 dB minimum
Gain Range 1 to 1000 (single resistor)
Gain Drift 5 ppm/°C (G=1); 50 ppm/°C (G>1)
Gain Error ±0.15% maximum
Gain Nonlinearity ±0.002% maximum
Input Bias Current 0.6 nA maximum
Bandwidth (G=1) 2 MHz
Bandwidth (G=100) 260 kHz
Supply Voltage 4.5V to 36V (single); ±2.25V to ±18V (dual)
Supply Current 650 µA maximum
Input Overvoltage ±40V protection
Package 8-SOIC (4.9 x 3.9mm)
Operating Temperature -40°C to +125°C

Features

  • Super-beta input transistors for ultra-low noise and drift
  • 50µV max offset — 4x better than INA128
  • 7nV/√Hz input noise — industry-best for this class
  • 140dB CMRR at G=10 for superior common-mode rejection
  • ±40V input overvoltage protection without damage
  • Stable with up to 1nF capacitive load
  • Single external resistor sets gain from 1 to 1000
  • 650µA max supply current — very low power
  • Drop-in upgrade for INA128 (pin-compatible)
  • 5V single-supply to ±18V dual-supply operation

Applications

  • Industrial process control signal conditioning
  • Medical ECG and biopotential amplifiers
  • Precision data acquisition systems
  • Battery tester and monitoring circuits
  • Bridge and load cell amplifiers
  • Power automation and metering
Product Introduction: INA828AIDR Product Introduction

The INA828AIDR is a second-generation high-precision instrumentation amplifier from Texas Instruments that significantly improves upon the classic INA128. Using super-beta input transistors, it achieves 50µV maximum input offset (4x better than INA128’s 200µV), 7nV/√Hz input noise density, 0.5µV/°C offset drift, and only 0.6nA input bias current. The 140dB minimum CMRR at G=10 provides outstanding common-mode rejection in noisy industrial environments. Input protection circuitry tolerates ±40V overvoltage without damage. Gain is set from 1 to 1000 with a single external resistor using the standard G = 1 + (49.4kΩ/RG) formula. The device is pin-compatible with the INA128, enabling direct upgrades in existing designs. Operating from 4.5V single supply to ±18V dual supplies with only 650µA supply current, it suits both portable and industrial applications.

Working Principle: INA828AIDR Working Principle

The INA828 uses a three-op-amp instrumentation amplifier architecture with super-beta input transistors. The input stage consists of two matched transconductance amplifiers whose feedback current flows through the gain resistor RG. The gain formula is G = 1 + (49.4kΩ/RG). The super-beta transistors provide extremely high current gain (β > 1000), resulting in sub-nanoampere input bias currents and correspondingly low input-referred noise and offset. The output stage is a difference amplifier that converts the internal differential signal to a single-ended output referenced to the REF pin. The ±40V input protection uses back-to-back diodes and current-limiting resistors that clamp input voltages without affecting normal operation. The device is compensated to remain stable with up to 1nF of capacitive load on the output, allowing direct connection to ADC input networks without additional buffering. The reference pin enables output level shifting for single-supply applications.

Pin Description: INA828AIDR Pin Definition and Functions
Pin Name Description
1 RG Gain resistor terminal 1
2 -IN Inverting input
3 +IN Non-inverting input
4 -VS Negative supply (or GND for single supply)
5 REF Reference (output offset) input
6 OUT Amplifier output
7 +VS Positive supply (4.5V to 36V)
8 RG Gain resistor terminal 2
Application Scenarios: In which products and applications is INA828AIDR used
  • Precision Bridge Amplifier: Amplify a 10mV full-scale load cell output at G=1000 with 0.14µVp-p low-frequency noise. The 140dB CMRR at G=10 (and increasing at higher gains) rejects ground-loop and electromagnetic interference from nearby motor drives. The 0.002% gain nonlinearity preserves measurement accuracy over the full load range. The REF pin shifts the output to mid-supply for single-supply ADC interfacing.
  • ECG Front-End: Amplify biopotential signals (0.5mV to 5mV) with G=500. The 7nV/√Hz input noise yields a total input noise of only ~30nV/√Hz at G=500, revealing subtle ECG features. The ±40V input protection handles defibrillator discharge events without damage. The 0.6nA bias current is low enough to not polarize wet ECG electrodes. The 90dB CMRR at G=1 (higher at G=500) rejects 50/60Hz common-mode interference.
  • 4-20mA Loop Current Sense: Measure the voltage across a precision shunt in a 4-20mA loop. At G=100, the INA828 provides a 0.4-2V output from a 4-20mV shunt signal. The ±40V input protection handles loop fault voltages. The 0.5µV/°C offset drift ensures stable zero readings over ambient temperature variations. The 100dB PSRR rejects power supply noise in industrial environments.
Alternative Models: What chips are recommended as replacements for INA828AIDR
Model Offset Noise CMRR (G=10) Key Difference
INA128 50µV typ 10nV/√Hz 120dB First generation, higher noise
INA826 50µV 22nV/√Hz 90dB Wider supply, lower CMRR
AD8429BRZ 50µV 1nV/√Hz 90dB ADI, ultra-low noise, lower CMRR
INA819 25µV 7nV/√Hz 140dB TI, even higher precision

Recommend Parts

MCP6S26-I

6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

Brand: MICROCHIP

Package: SOIC-14 (150 mils body width)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MM3Z9V1

9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

Brand: ON

Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

IN STOCK: 10735pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT89S51

8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

Package: PDIP-40 / TQFP-44 / PLCC-44

IN STOCK: 15000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

GD32F303CBT6

Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

Brand: gigadevice

Package: LQFP-48 (7x7mm, 0.5mm pitch)

IN STOCK: 3342pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MIC5205-3.3YM5-TR

3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

Brand: MICROCHIP

Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

IN STOCK: 9858pcs

Cargo cycle: 3-7 Days

The minimum order is 1