Opens in a new tab

ADM3483ARZ

3.3V low-power RS-485/RS-422 half-duplex transceiver, 250kbps, slew-rate limited, SOIC-8, shutdown mode

9870

Effective Inventory

Image for reference only

Manufacturer Part:

ADM3483ARZ

Package:

SOIC-8

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The ADM3483ARZ is a 3.3V low-power RS-485/RS-422 transceiver from Analog Devices featuring half-duplex communication at up to 250 kbps with slew-rate limited drivers for reduced EMI. It includes driver and receiver enable controls, shutdown mode with 2 nA supply current, and thermal shutdown protection in an 8-lead SOIC package.

Key Specifications

  • Supply Voltage: 3.3V (single supply)
  • Data Rate: 250 kbps (slew rate limited)
  • Configuration: Half-Duplex (1 driver + 1 receiver)
  • Driver/Receiver Enable: DE and RE controls
  • Bus Common-Mode Range: -7V to +12V
  • Receiver Input Impedance: 12 kΩ
  • Max Nodes on Bus: 32 transceivers
  • Shutdown Current: 2 nA
  • Operating Supply Current: 2.2 mA
  • Operating Temperature: -40°C ~ +85°C
  • Package: SOIC-8
  • Output Type: 3-State

Features

  • 3.3V single supply operation
  • Interoperable with 5V logic
  • EIA RS-485/RS-422 compliant over full common-mode range
  • Slew-rate limited drivers minimize EMI and reflections
  • 2 nA shutdown current for battery-powered applications
  • Thermal shutdown protection
  • Fail-safe receiver output (logic high for floating inputs)
  • Pin-compatible with industry-standard 75176

Applications

  • Low-power RS-485/RS-422 networks
  • Telecom systems
  • Industrial process control
  • HVAC systems
  • Battery-powered communication devices
Product Introduction: ADM3483ARZ Product Introduction

The ADM3483ARZ from Analog Devices is a low-power differential line transceiver designed for half-duplex RS-485/RS-422 communication on a single 3.3V supply. The slew-rate limited driver outputs minimize electromagnetic interference (EMI) and reduce reflections caused by improperly terminated cables, enabling error-free data transmission at up to 250 kbps. The device features separate driver enable (DE) and receiver enable (RE) controls for flexible bus management. A shutdown mode reduces supply current to just 2 nA, making it ideal for battery-powered applications. The receiver includes a fail-safe feature that outputs a logic high when inputs are unconnected.

Working Principle: ADM3483ARZ Working Principle

The ADM3483ARZ converts between single-ended TTL/CMOS logic levels and differential RS-485/RS-422 bus signals. The driver takes a single-ended input (DI) and generates complementary differential outputs (A and B) with slew-rate limiting to control signal edge rates. The receiver converts the differential bus voltage (A-B) back to a single-ended output (RO). In half-duplex mode, the driver and receiver share the same bus pins (A and B), with DE and RE controls determining whether the device is transmitting or receiving. The slew-rate limiting circuit slows output transitions to reduce high-frequency spectral content, minimizing EMI and allowing reliable operation with improperly terminated cables. The thermal shutdown circuit disables the driver if the junction temperature exceeds approximately 150°C.

Pin Description: ADM3483ARZ Pin Definition and Functions
Pin Name Function
1 RO Receiver Output
2 RE Receiver Output Enable (active low)
3 DE Driver Output Enable (active high)
4 DI Driver Data Input
5 GND Ground
6 A Non-inverting Bus I/O
7 B Inverting Bus I/O
8 VCC 3.3V Power Supply
Application Scenarios: In which products and applications is ADM3483ARZ used

The ADM3483ARZ is widely used in industrial process control networks where multiple devices communicate over long RS-485 buses. The slew-rate limiting makes it particularly suitable for applications with cable lengths up to 4000 feet at lower data rates. In HVAC systems, it enables communication between thermostats, controllers, and actuators. The 2 nA shutdown current is critical for battery-powered remote sensors that wake periodically to transmit data. The 3.3V supply compatibility allows direct interface with modern low-voltage microcontrollers without level shifting.

Alternative Models: What chips are recommended as replacements for ADM3483ARZ
Model Manufacturer Key Difference
ADM3485ARZ Analog Devices 10 Mbps data rate version
ADM3483EARZ Analog Devices ±15kV ESD protected version
SP3485CN MaxLinear 3.3V, 10Mbps alternative

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1