Opens in a new tab

Home » Integrated Circuits ICs » AT24C04C-MAHM-T

AT24C04C-MAHM-T

4Kb I2C serial EEPROM, 512×8, 1MHz, 1.7-5.5V, 1M cycles endurance, 8-UDFN 2x3mm

6800

Effective Inventory

Image for reference only

Manufacturer Part:

AT24C04C-MAHM-T

Package:

8-UDFN (2 x 3 mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The AT24C04C-MAHM-T is a 4Kb I2C-compatible serial EEPROM from Microchip Technology organized as 512 x 8 bits. It operates from 1.7V to 5.5V with clock frequencies up to 1 MHz and features 1,000,000 write cycle endurance and 100-year data retention in a compact 8-UDFN (2 x 3 mm) surface-mount package.

Key Specifications

  • Density: 4 Kbit (512 x 8)
  • Interface: I2C (2-wire)
  • Clock Frequency: 400 kHz (1.7V), 1 MHz (2.5V and above)
  • Page Size: 16 bytes
  • Write Cycle Time: 5 ms max (self-timed)
  • Access Time: 550 ns
  • Supply Voltage: 1.7V ~ 5.5V
  • Read Current: 0.4 mA typical
  • Write Current: 2 mA typical
  • Standby Current: 6 µA max
  • Endurance: 1,000,000 write cycles
  • Data Retention: >100 years
  • Operating Temperature: -40°C ~ 85°C
  • Package: 8-UDFN (2 x 3 mm)
  • Write Protect Pin: Hardware data protection

Features

  • Dual clock rate: 400 kHz at 1.7V, 1 MHz at 2.5V+
  • Supports up to 4 devices on the same I2C bus
  • 16-byte page write mode with partial page writes allowed
  • Schmitt trigger filtered inputs for noise suppression
  • Bidirectional data transfer protocol
  • Hardware write-protect pin for data security
  • Self-timed write cycle (no external components needed)
  • Green package options (Pb-free, halide-free, RoHS compliant)

Applications

  • Industrial and consumer electronics
  • Automotive systems (AEC-Q100 qualified variants available)
  • Configuration and calibration data storage
  • Smart metering and IoT devices
  • Embedded system parameter storage
Product Introduction: AT24C04C-MAHM-T Product Introduction

The AT24C04C-MAHM-T is a 4 Kb Serial EEPROM from Microchip Technology utilizing the industry-standard I2C (2-wire) serial interface. Organized as 512 words of 8 bits each, the device provides reliable non-volatile storage for configuration data, calibration parameters, and user settings. The AT24C04C supports both standard-mode (400 kHz at 1.7V) and fast-mode-plus (1 MHz at 2.5V and above) I2C operation. The MAHM-T variant is packaged in a compact 8-UDFN (2 x 3 mm) surface-mount package with exposed pad, ideal for space-constrained designs. Hardware write protection via the WP pin prevents accidental data corruption.

Working Principle: AT24C04C-MAHM-T Working Principle

The AT24C04C-MAHM-T communicates via the I2C protocol using just two signal lines: SCL (serial clock) and SDA (serial data). The device address is configured through the A0 and A1 address pins, allowing up to 4 AT24C04C devices to share the same I2C bus. Read operations are initiated by sending the device address followed by the word address, after which the device outputs data on SDA. Write operations support both byte-write and 16-byte page-write modes. During a page write, up to 16 bytes can be loaded into the internal page buffer before the self-timed write cycle begins, minimizing bus occupancy. The Schmitt trigger inputs provide noise immunity on the SCL and SDA lines, ensuring reliable communication in electrically noisy environments.

Pin Description: AT24C04C-MAHM-T Pin Definition and Functions
Pin Name Function
1 A0 Address input bit 0
2 A1 Address input bit 1
3 VSS Ground
4 SDA Serial Data (I2C data, bidirectional)
5 SCL Serial Clock (I2C clock)
6 WP Write Protect (active high blocks write access)
7 NC No Connect
8 VCC Power Supply (1.7V to 5.5V)
Application Scenarios: In which products and applications is AT24C04C-MAHM-T used

The AT24C04C-MAHM-T is widely used in consumer electronics for storing user preferences, calibration data, and serial numbers. In industrial systems, it retains configuration parameters across power cycles with its 100-year data retention specification. The compact UDFN package is ideal for wearable devices and IoT sensors where board space is extremely limited. For automotive applications, the AEC-Q100 qualified variants provide reliable operation in harsh environments. The 1 MHz I2C support enables fast read/write access in systems requiring quick startup from stored parameters.

Alternative Models: What chips are recommended as replacements for AT24C04C-MAHM-T
Model Manufacturer Key Difference
AT24C08C-MAHM-T Microchip 8Kb (1024×8) higher density
AT24C04C-SSHM-T Microchip SOIC-8 package variant
24LC04B-I/SN Microchip 4Kb, SOIC-8, 400kHz only

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1