Opens in a new tab

AD824ARZ-14

Quad rail-to-rail output op-amp, 2MHz GBW, 1.5µA/amplifier, 3-36V, SOIC-14

8900

Effective Inventory

Image for reference only

Manufacturer Part:

AD824ARZ-14

Package:

SOIC-14

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The AD824ARZ-14 from Analog Devices is a quad single-supply operational amplifier with rail-to-rail outputs, optimized for low power and single-supply operation from 3V to 36V (±1.5V to ±18V). It features 2 MHz bandwidth, 1.2 V/µs slew rate, and only 1.5 µA supply current per amplifier in a 14-pin SOIC package.

Key Specifications

  • Channels: 4 (quad)
  • Supply Voltage: 3V ~ 36V (single) or ±1.5V ~ ±18V (dual)
  • Bandwidth: 2 MHz (gain-bandwidth product)
  • Slew Rate: 1.2 V/µs
  • Supply Current: 1.5 µA per amplifier
  • Input Offset Voltage: 2 mV max
  • Input Bias Current: 10 pA typical
  • Output Swing: Rail-to-rail (within 50 mV of rails)
  • Common-Mode Rejection: 90 dB
  • Power Supply Rejection: 100 dB
  • Operating Temperature: -40°C ~ +85°C
  • Package: SOIC-14

Features

  • Rail-to-rail output swing maximizes dynamic range
  • Single-supply operation down to 3V
  • Ultra-low supply current: 1.5 µA per amplifier
  • Picoampere input bias current (10 pA) for high-impedance sensors
  • Overload recovery from output saturation
  • No phase reversal on input overdrive
  • Unit-gain stable with any capacitive load

Applications

  • Battery-powered instrumentation
  • Sensor signal conditioning
  • Portable medical devices
  • Low-power filter circuits
  • Transimpedance amplifiers for photodiodes
Product Introduction: AD824ARZ-14 Product Introduction

The AD824ARZ-14 from Analog Devices is a quad single-supply operational amplifier that combines rail-to-rail output capability with ultra-low 1.5 µA supply current per amplifier. This unique combination makes it ideal for battery-powered applications where long operating life is essential. The device operates from a single 3V to 36V supply or dual ±1.5V to ±18V supplies, providing flexibility for various system architectures. The picoampere input bias current (10 pA typical) allows direct interface with high-impedance sensors such as photodiodes and pH probes without loading effects. The rail-to-rail output swings within 50 mV of each supply rail, maximizing the available dynamic range in low-voltage systems.

Working Principle: AD824ARZ-14 Working Principle

The AD824ARZ-14 uses a complementary common-emitter output stage that enables the output to swing close to both supply rails, maximizing dynamic range in single-supply applications. The input stage uses a JFET design that provides the ultra-low 10 pA input bias current, critical for high-impedance sensor interfaces where bias current would otherwise cause offset errors. The internal compensation ensures stability at unity gain with any capacitive load, eliminating the need for external compensation components. The 2 MHz gain-bandwidth product and 1.2 V/µs slew rate are sufficient for most low-frequency signal conditioning applications, including active filters and transimpedance amplifiers. The -14 suffix indicates the SOIC-14 package variant.

Pin Description: AD824ARZ-14 Pin Definition and Functions
Pin Name Function
1 OUT A Amplifier A output
2 -IN A Amplifier A inverting input
3 +IN A Amplifier A non-inverting input
4 V+ Positive supply voltage
5 +IN B Amplifier B non-inverting input
6 -IN B Amplifier B inverting input
7 OUT B Amplifier B output
8 OUT C Amplifier C output
9 -IN C Amplifier C inverting input
10 +IN C Amplifier C non-inverting input
11 V- Negative supply voltage
12 +IN D Amplifier D non-inverting input
13 -IN D Amplifier D inverting input
14 OUT D Amplifier D output
Application Scenarios: In which products and applications is AD824ARZ-14 used

The AD824ARZ-14 is widely used in portable medical devices where its low power consumption extends battery life and the rail-to-rail output maximizes signal range from limited supply voltages. In sensor signal conditioning, the picoampere input bias current prevents loading of high-impedance sensors such as piezoelectric transducers and photodiodes. For active filter applications, the 2 MHz GBW supports filter frequencies up to several hundred kHz with moderate Q values. The quad configuration enables complete signal chains (buffer → filter → gain → driver) in a single IC, reducing board space and cost in multi-channel systems.

Alternative Models: What chips are recommended as replacements for AD824ARZ-14
Model Manufacturer Key Difference
AD824BNZ Analog Devices DIP-14 package, lower offset
LMC660CN Texas Instruments Quad CMOS RRIO, 1.5MHz
MCP6004-I/SL Microchip Quad RRIO, 1MHz, lower cost

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1