Opens in a new tab

CD4053BPWR

Triple SPDT CMOS analog multiplexer, 3-20V, 125 Ohm Ron, 16-TSSOP

12371

Effective Inventory

Image for reference only

Manufacturer Part:

CD4053BPWR

Package:

16-TSSOP (5.0×4.4mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The CD4053BPWR from Texas Instruments is a triple 2-channel CMOS analog multiplexer/demultiplexer with logic-level conversion. Each of the three switches is independently controlled, supporting SPDT (single-pole double-throw) configurations. Packaged in a 16-pin TSSOP.

Key Specifications

Configuration Triple SPDT (3 x 2:1)
Supply Voltage Range 3V to 20V (VDD-VSS)
Analog Signal Range Up to 20V p-p
ON Resistance 125 Ohm (typ at 15V)
OFF Leakage +/-10pA (typ at 15V)
Switching Time 720ns (max)
Package 16-TSSOP (5.0×4.4mm)
Operating Temperature -55 to +125 C

Features

  • Triple 2-channel multiplexer/demultiplexer
  • Low ON resistance: 125 Ohm typical
  • Bidirectional signal path
  • Break-before-make switching
  • Logic-level conversion capability
  • Very low quiescent power: 0.2uW (typ)
  • Digital address decoding on chip

Applications

  • Analog and digital signal multiplexing
  • A/D and D/A conversion
  • Signal gating and routing
  • Factory automation
Product Introduction: CD4053BPWR Product Introduction

The CD4053BPWR is a triple 2-channel CMOS analog multiplexer/demultiplexer from Texas Instruments. Each of the three independent SPDT switches is controlled by its own digital select input (A, B, C), with a common inhibit pin to disable all switches simultaneously. The device features low ON resistance of 125 Ohm at 15V, bidirectional signal paths, and break-before-make switching to prevent channel overlap. Logic-level conversion allows digital control signals at one voltage level to switch analog signals at a different level. The very low quiescent power of 0.2uW makes it suitable for battery-powered applications.

Working Principle: CD4053BPWR Working Principle

The CD4053BPWR uses CMOS transmission gates as analog switches. Each SPDT switch consists of two complementary MOSFET pairs (one for each channel) controlled by the select input and its complement. When a channel is selected, the corresponding transmission gate conducts, providing a low-impedance path between the common terminal and the selected channel terminal. The break-before-make circuitry ensures that the previously selected channel is disconnected before the new channel is connected. The inhibit pin, when high, turns off all switches regardless of the select inputs. The device supports dual-supply operation (VDD, VSS, VEE) for switching bipolar analog signals.

Pin Description: CD4053BPWR Pin Definition and Functions
Pin Name Function
1 AY Channel A, Y input/output
2 AX Channel A, X input/output
3 BY Channel B, Y input/output
4 B-COM Channel B common
5 BX Channel B, X input/output
6 INH Inhibit (active high)
7 VEE Negative supply (analog reference)
8 VSS Ground
9 C Channel C select input
10 B Channel B select input
11 A Channel A select input
12 CX Channel C, X input/output
13 C-COM Channel C common
14 CY Channel C, Y input/output
15 A-COM Channel A common
16 VDD Positive supply
Application Scenarios: In which products and applications is CD4053BPWR used
  • Audio signal routing with triple SPDT switching for stereo L/R/mono selection
  • A/D converter input multiplexing for multi-channel sensor systems
  • Signal gating in factory automation with break-before-make protection
  • Battery-powered instrumentation needing low quiescent power analog switching
Alternative Models: What chips are recommended as replacements for CD4053BPWR
Model Manufacturer Key Difference
HEF4053BT Nexperia Pin-compatible, SO-16 package
MC14053BDR2G onsemi Pin-compatible CMOS mux
DG4053 Vishay Lower Ron, higher performance
TS5A3159 TI Single SPDT, very low Ron

Recommend Parts

MCP6S26-I

6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

Brand: MICROCHIP

Package: SOIC-14 (150 mils body width)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MM3Z9V1

9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

Brand: ON

Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

IN STOCK: 10735pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT89S51

8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

Package: PDIP-40 / TQFP-44 / PLCC-44

IN STOCK: 15000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

GD32F303CBT6

Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

Brand: gigadevice

Package: LQFP-48 (7x7mm, 0.5mm pitch)

IN STOCK: 3342pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MIC5205-3.3YM5-TR

3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

Brand: MICROCHIP

Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

IN STOCK: 9858pcs

Cargo cycle: 3-7 Days

The minimum order is 1