Opens in a new tab

LM741CN

General-purpose op-amp, 1.5MHz GBW, +/-15V supply, 8-PDIP, classic 741

2251

Effective Inventory

Image for reference only

Manufacturer Part:

LM741CN

Package:

8-PDIP

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The LM741CN from Texas Instruments is a general-purpose operational amplifier and arguably the most iconic analog IC in history. With 1.5MHz bandwidth, +/-15V supply operation, and internal compensation, it remains a benchmark in analog design education and basic signal processing.

Key Specifications

Channels 1 (Single)
Supply Voltage +/-10V to +/-22V
Gain-Bandwidth Product 1.5MHz
Slew Rate 0.5V/us
Input Offset Voltage 1mV (typ), 5mV (max)
Input Bias Current 80nA (typ)
CMRR 90dB (typ)
Package 8-PDIP
Operating Temperature 0 to +70 C

Features

  • Internal frequency compensation
  • Short-circuit protection
  • Offset voltage null capability
  • Wide common-mode and differential voltage ranges
  • No latch-up
  • Balanced input for offset nulling

Applications

  • General-purpose amplification
  • Active filter circuits
  • Comparator circuits
  • Analog computation and education
Product Introduction: LM741CN Product Introduction

The LM741CN is the general-purpose operational amplifier from Texas Instruments that has defined the standard for analog IC design since the 1960s. Operating from +/-10V to +/-22V supplies, it provides a gain-bandwidth product of 1.5MHz and slew rate of 0.5V/us. Internal frequency compensation ensures stability without external capacitors in most configurations. The offset null pins allow external adjustment of input offset voltage. While modern op-amps surpass the 741 in virtually every parameter, it remains widely used in education and basic applications where its limitations are well understood and adequate performance is sufficient.

Working Principle: LM741CN Working Principle

The LM741 uses a bipolar input stage with a differential pair that converts the differential input voltage to a differential current. This current is mirrored and fed to a high-gain intermediate stage with a dominant pole compensation capacitor that sets the 1.5MHz gain-bandwidth product. The output stage is a class AB push-pull amplifier with current limiting for short-circuit protection. The input bias current (80nA typical) is the base current of the input differential pair transistors. The offset null pins connect to the emitter circuit of the input pair, allowing external trimming to reduce the input offset voltage to zero.

Pin Description: LM741CN Pin Definition and Functions
Pin Name Function
1 OFFSET N1 Offset null adjustment
2 IN- Inverting input
3 IN+ Non-inverting input
4 VCC- Negative supply voltage
5 OFFSET N2 Offset null adjustment
6 OUTPUT Amplifier output
7 VCC+ Positive supply voltage
8 NC Not connected
Application Scenarios: In which products and applications is LM741CN used
  • Educational analog circuit design demonstrating fundamental op-amp principles
  • Basic inverting and non-inverting amplifier circuits for signal conditioning
  • Active filter implementations (Sallen-Key, multiple feedback) with 1.5MHz bandwidth
  • Comparator and oscillator circuits leveraging the 741’s well-documented behavior
Alternative Models: What chips are recommended as replacements for LM741CN
Model Manufacturer Key Difference
LM358 TI Dual, single supply, lower cost
TL071CP TI JFET input, lower bias current
NE5532P TI Dual, lower noise, audio standard
OP07CP ADI Ultra-low offset (75uV), precision

Recommend Parts

MCP6S26-I

6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

Brand: MICROCHIP

Package: SOIC-14 (150 mils body width)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MM3Z9V1

9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

Brand: ON

Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

IN STOCK: 10735pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT89S51

8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

Package: PDIP-40 / TQFP-44 / PLCC-44

IN STOCK: 15000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

GD32F303CBT6

Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

Brand: gigadevice

Package: LQFP-48 (7x7mm, 0.5mm pitch)

IN STOCK: 3342pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MIC5205-3.3YM5-TR

3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

Brand: MICROCHIP

Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

IN STOCK: 9858pcs

Cargo cycle: 3-7 Days

The minimum order is 1