Opens in a new tab

Home » Integrated Circuits ICs » SN74HC595N

SN74HC595N

8-bit shift register with output latch, 3-state outputs, 25MHz, 16-PDIP

7553

Effective Inventory

Image for reference only

Manufacturer Part:

SN74HC595N

Package:

16-PDIP

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The SN74HC595N from Texas Instruments is an 8-bit shift register with output latch and 3-state outputs. It converts serial input to 8-bit parallel output using only 3 MCU pins, with daisy-chain capability for unlimited output expansion. Packaged in 16-PDIP.

Key Specifications

Logic Family 74HC (High-Speed CMOS)
Bits 8-bit shift register + 8-bit output latch
Supply Voltage 2V to 6V
Shift Frequency 25MHz (typ at 5V)
Output Current +/-6mA per output (at 5V)
Propagation Delay 20ns (typ at 5V)
Package 16-PDIP
Operating Temperature -40 to +85 C

Features

  • 8-bit serial-in, parallel-out shift register
  • Separate output latch for glitch-free updates
  • 3-state outputs for bus interface
  • Daisy-chain serial output (QH’)
  • Direct clear (SRCLR) for register reset
  • Output enable (OE) for 3-state control

Applications

  • Expanding MCU output pins
  • LED matrix and display driving
  • Serial-to-parallel data conversion
  • Daisy-chained I/O expansion
Product Introduction: SN74HC595N Product Introduction

The SN74HC595N from Texas Instruments is an 8-bit shift register with output latch and 3-state outputs that converts serial data from 3 MCU pins (DATA, SRCLK, RCLK) into 8 parallel outputs. The two-stage architecture (shift register + output latch) allows new data to be shifted in while the current output remains stable, eliminating output glitches during updates. The QH’ serial output enables daisy-chaining multiple 74HC595 devices for unlimited output expansion while using only 3 MCU pins. The 3-state outputs with Output Enable (OE) allow the device to be connected to a shared bus. With 25MHz shift frequency and +/-6mA output drive at 5V, it is the most popular IC for LED matrix driving and GPIO expansion.

Working Principle: SN74HC595N Working Principle

The 74HC595 contains two 8-bit registers: the shift register and the storage register (output latch). Serial data is clocked into the shift register on the rising edge of SRCLK. When RCLK rises, the shift register contents are copied to the storage register, which drives the Q0-Q7 outputs. This two-stage pipeline allows shifting new data without disturbing the current output. The SRCLR pin asynchronously clears the shift register. The OE pin controls the 3-state output buffers: when OE is high, all outputs are high-impedance; when low, the storage register drives the outputs. The QH’ pin outputs the last bit of the shift register, which becomes the first bit of the next daisy-chained device.

Pin Description: SN74HC595N Pin Definition and Functions
Pin Name Function
1 Q1 Parallel output bit 1
2 Q2 Parallel output bit 2
3 Q3 Parallel output bit 3
4 Q4 Parallel output bit 4
5 Q5 Parallel output bit 5
6 Q6 Parallel output bit 6
7 Q7 Parallel output bit 7
8 GND Ground
9 Q7′ Serial output (for daisy chain)
10 SRCLR Shift register clear (active low)
11 SRCLK Shift register clock input
12 RCLK Storage register clock (latch)
13 OE Output enable (active low, 3-state)
14 SER Serial data input
15 Q0 Parallel output bit 0
16 VCC Supply voltage (2-6V)
Application Scenarios: In which products and applications is SN74HC595N used
  • Expanding MCU GPIO from 3 pins to 8+ outputs using daisy-chain shift registers
  • LED matrix and 7-segment display driving with glitch-free latch updates
  • Serial-to-parallel data conversion with 25MHz shift rate and 3-state bus
  • Home automation relay control boards with unlimited channel expansion
Alternative Models: What chips are recommended as replacements for SN74HC595N
Model Manufacturer Key Difference
74HC595D Nexperia SOIC-16 surface mount
74HC165N TI Parallel-in serial-out (reverse direction)
TPIC6B595 TI Power shift register, 50V/150mA, open drain
MAX7219 ADI SPI LED driver with current control

Recommend Parts

STM32L452RCT6

Ultra-low-power ARM Cortex-M4 MCU with FPU, 80MHz, 256KB Flash, 160KB SRAM, USB FS, LQFP64

Brand: ST

Package: LQFP-64 (10x10x1.4 mm)

IN STOCK: 10650pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IS61WV51216EDBLL-10TLI

8Mb (512Kx16) ultra-low-power SRAM, 10ns, ECC, 2.2~3.6V, industrial, 44-TSOP II

Brand: Issi

Package: 44-pin TSOP II

IN STOCK: 5432pcs

Cargo cycle: 3-7 Days

The minimum order is 1

RC0603JR-0720RL

20Ω ±5% 0.1W thick film chip resistor in 0603 package for general-purpose applications

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 3216pcs

Cargo cycle: 3-7 Days

The minimum order is 1

STM32F334K8T6

ARM Cortex-M4 MCU with high-resolution timer, 72MHz, 64KB Flash, LQFP-32

Brand: ST

Package: LQFP-32 (7.0 x 7.0 mm)

IN STOCK: 14928pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CSD87330Q3D

30V 20A NexFET power block, 91% eff@15A, 5V gate drive, LSON-8 3.3×3.3mm, up to 1.5MHz, -55~150°C

Brand: TI

Package: LSON-CLIP-8 (3.3 x 3.3 x 1.0 mm, land pattern per datasheet)

IN STOCK: 4400pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TLVH431AIDBZR

Adjustable precision shunt regulator, 1.24V ref, 1% A-grade, VO=1.24-18V, IK=0.1-70mA, 0.25Ohm zKA, SOT-23-3, -40 to 85C

Brand: TI

Package: SOT-23-3 (DBZ), 2.92 x 1.30 x 1.22 mm

IN STOCK: 2930pcs

Cargo cycle: 3-7 Days

The minimum order is 1