Opens in a new tab

LM393N

Dual comparator, open-collector output, 2-36V, 1.3us response, 8-PDIP

11642

Effective Inventory

Image for reference only

Manufacturer Part:

LM393N

Package:

8-PDIP

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The LM393N from Texas Instruments is a dual differential comparator with open-collector outputs, operating from 2V to 36V. With 1.3us typical response time and 0.4mA supply current, it is the industry standard for voltage comparison and threshold detection. Packaged in 8-PDIP.

Key Specifications

Channels 2 (Dual)
Supply Voltage 2V to 36V (single) or +/-1V to +/-18V
Response Time 1.3us (typ)
Input Offset Voltage +/-1mV (typ)
Input Bias Current 25nA (typ)
Supply Current 0.4mA (typ, both comparators)
Output Type Open-collector (NPN)
Output Sink Current 16mA (typ)
Package 8-PDIP
Operating Temperature 0 to +70 C

Features

  • Wide supply voltage: 2V to 36V single supply
  • Open-collector outputs for wired-OR
  • Low input offset: +/-1mV typical
  • 1.3us typical response time
  • 0.4mA total supply current
  • Output compatible with TTL, MOS, and CMOS logic

Applications

  • Voltage threshold detection
  • Window comparator circuits
  • Oscillator and timer circuits
  • Sensor signal conditioning
Product Introduction: LM393N Product Introduction

The LM393N from Texas Instruments is the industry standard dual differential comparator with open-collector outputs. It operates from a single 2V to 36V supply and features 1.3us typical response time, +/-1mV typical input offset voltage, and only 0.4mA total supply current. The open-collector outputs allow wired-OR connections and interface with any logic voltage from 0 to VCC through external pull-up resistors. When the non-inverting input exceeds the inverting input, the output transistor turns off (high impedance); when the inverting input is higher, the output transistor turns on, sinking current to ground. This flexible output structure makes the LM393N suitable for a wide range of threshold detection, window comparison, and oscillator applications.

Working Principle: LM393N Working Principle

The LM393N uses a differential input stage followed by a gain stage and an open-collector NPN output transistor. The differential pair compares the two input voltages: when IN+ > IN-, the gain stage turns off the output transistor (output is high impedance, pulled high by external resistor); when IN+ < IN-, the gain stage turns on the output transistor (output saturates to near ground). The open-collector structure means the output can only sink current (pull to ground), never source it. This allows multiple comparator outputs to be wire-ORed together and the output pull-up voltage to be different from the comparator supply voltage. The 1.3us response time is the propagation delay from input crossing to output transition.

Pin Description: LM393N Pin Definition and Functions
Pin Name Function
1 1OUT Channel 1 output (open collector)
2 1IN- Channel 1 inverting input
3 1IN+ Channel 1 non-inverting input
4 GND Ground / negative supply
5 2IN+ Channel 2 non-inverting input
6 2IN- Channel 2 inverting input
7 2OUT Channel 2 output (open collector)
8 VCC Positive supply (2-36V)
Application Scenarios: In which products and applications is LM393N used
  • Voltage threshold detection with hysteresis for sensor signal conditioning
  • Window comparator circuits using two channels for over/under voltage detection
  • Oscillator circuits with open-collector output driving LEDs or relays
  • Wired-OR fault detection with multiple comparator outputs on a shared bus
Alternative Models: What chips are recommended as replacements for LM393N
Model Manufacturer Key Difference
LM339N TI Quad comparator, same architecture
LM2903N TI Automotive grade, -40 to +125C
LMV393 TI Low voltage (2.7-5V), lower power
TS881 ST Nanopower comparator, 210nA

Recommend Parts

MCP6S26-I

6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

Brand: MICROCHIP

Package: SOIC-14 (150 mils body width)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MM3Z9V1

9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

Brand: ON

Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

IN STOCK: 10735pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT89S51

8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

Package: PDIP-40 / TQFP-44 / PLCC-44

IN STOCK: 15000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

GD32F303CBT6

Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

Brand: gigadevice

Package: LQFP-48 (7x7mm, 0.5mm pitch)

IN STOCK: 3342pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MIC5205-3.3YM5-TR

3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

Brand: MICROCHIP

Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

IN STOCK: 9858pcs

Cargo cycle: 3-7 Days

The minimum order is 1