Opens in a new tab

CD4051BE

8-ch analog mux/demux, 3-20V, 125Ω Ron, PDIP-16

5340

Effective Inventory

Image for reference only

Manufacturer Part:

CD4051BE

Package:

PDIP-16 (19.3×7.62 mm, 2.54mm pitch, through-hole)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The CD4051BE from Texas Instruments is a CMOS single 8-channel analog multiplexer/demultiplexer with logic-level conversion. It can switch analog signals up to 20V peak-to-peak with digital control from 3V to 20V. Featuring low ON resistance (125Ω typical at 15V), bidirectional signal paths, and break-before-make switching, it is packaged in a 16-pin PDIP for through-hole prototyping and production.

Key Specifications

Channels 8:1 single-channel multiplexer
Analog Signal Range ≤20V peak-to-peak
Single Supply Range 3V to 20V
Dual Supply Range ±3V to ±10V
ON Resistance 125Ω (typical at VDD=15V)
Channel Leakage (OFF) ±10 pA (typical at VDD=15V)
Quiescent Power 0.2 µW (typical)
Address Setup Time ~200 ns
Operating Temperature -55°C to +125°C
Package PDIP-16 (7.62mm width)

Features

  • 8-channel analog multiplexing/demultiplexing
  • 3-bit binary address selection with inhibit control
  • Low ON resistance: 125Ω typical at 15V supply
  • Ultra-low OFF leakage: ±10 pA typical
  • Break-before-make switching eliminates channel overlap
  • Bidirectional signal path (analog I/O)
  • Logic-level conversion between digital and analog domains
  • ESD protection: 3000V HBM, 2000V CDM

Applications

  • Multi-channel analog-to-digital conversion input selection
  • Sensor multiplexing and data acquisition
  • Audio signal routing and switching
  • Keypad scanning with microcontroller
  • Digital-to-analog converter output demultiplexing
Product Introduction: CD4051BE Product Introduction

The CD4051BE from Texas Instruments is a CMOS single 8-channel analog multiplexer/demultiplexer with logic-level conversion capability. It can switch analog signals up to 20V peak-to-peak using 3-bit binary address control, with low 125Ω ON resistance and ultra-low ±10 pA OFF leakage. The break-before-make switching and bidirectional signal paths make it ideal for analog signal routing, sensor multiplexing, and data acquisition systems.

Working Principle: CD4051BE Working Principle

The CD4051BE uses CMOS transmission gates to connect one of eight analog channels (Y0-Y7) to a common output (COM) based on a 3-bit binary address (A, B, C). An active-high inhibit (INH) input disables all channels when asserted. The internal decoding logic selects the appropriate transmission gate pair (one PMOS, one NMOS in parallel) to form a low-resistance bidirectional switch. Break-before-make switching ensures no two channels are simultaneously connected. The VEE pin allows negative analog signal handling when dual supplies are used, enabling signal swing below ground.

Pin Description: CD4051BE Pin Definition and Functions
Pin Name Type Function
1 Y4 Analog Channel 4 analog I/O
2 Y6 Analog Channel 6 analog I/O
3 COM Analog Common analog I/O (output/input)
4 Y7 Analog Channel 7 analog I/O
5 Y5 Analog Channel 5 analog I/O
6 INH Digital Inhibit (active-high, disables all channels)
7 VEE Power Negative analog supply (connect to VSS for single supply)
8 VSS Power Ground (digital)
9 A Digital Address input LSB
10 B Digital Address input middle bit
11 C Digital Address input MSB
12 Y3 Analog Channel 3 analog I/O
13 Y0 Analog Channel 0 analog I/O
14 Y1 Analog Channel 1 analog I/O
15 Y2 Analog Channel 2 analog I/O
16 VDD Power Positive supply (3-20V)
Application Scenarios: In which products and applications is CD4051BE used
  • Multi-channel ADC input selection for data acquisition systems
  • Multiple sensor signal multiplexing to a single ADC input
  • Audio signal routing and switching in consumer electronics
  • Keypad scanning with microcontroller GPIO expansion
  • DAC output demultiplexing to multiple analog channels
Alternative Models: What chips are recommended as replacements for CD4051BE
Manufacturer Part Number Package Notes
TI CD4051BM96 SOIC-16 SMD version of CD4051BE
ON Semiconductor MC14051BDWR2G SOIC-16 Direct equivalent, SMD
TI DG408DJZ DIP-16 Lower Ron (35Ω), higher performance
Analog Devices ADG708BRUZ TSSOP-16 2.5Ω Ron, 1.8-5.5V, high perf
Nexperia 74HC4051D SOIC-16 HC version, 2-10V, faster switching

Recommend Parts

STM32L452RCT6

Ultra-low-power ARM Cortex-M4 MCU with FPU, 80MHz, 256KB Flash, 160KB SRAM, USB FS, LQFP64

Brand: ST

Package: LQFP-64 (10x10x1.4 mm)

IN STOCK: 10650pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IS61WV51216EDBLL-10TLI

8Mb (512Kx16) ultra-low-power SRAM, 10ns, ECC, 2.2~3.6V, industrial, 44-TSOP II

Brand: Issi

Package: 44-pin TSOP II

IN STOCK: 5432pcs

Cargo cycle: 3-7 Days

The minimum order is 1

RC0603JR-0720RL

20Ω ±5% 0.1W thick film chip resistor in 0603 package for general-purpose applications

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 3216pcs

Cargo cycle: 3-7 Days

The minimum order is 1

STM32F334K8T6

ARM Cortex-M4 MCU with high-resolution timer, 72MHz, 64KB Flash, LQFP-32

Brand: ST

Package: LQFP-32 (7.0 x 7.0 mm)

IN STOCK: 14928pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CSD87330Q3D

30V 20A NexFET power block, 91% eff@15A, 5V gate drive, LSON-8 3.3×3.3mm, up to 1.5MHz, -55~150°C

Brand: TI

Package: LSON-CLIP-8 (3.3 x 3.3 x 1.0 mm, land pattern per datasheet)

IN STOCK: 4400pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TLVH431AIDBZR

Adjustable precision shunt regulator, 1.24V ref, 1% A-grade, VO=1.24-18V, IK=0.1-70mA, 0.25Ohm zKA, SOT-23-3, -40 to 85C

Brand: TI

Package: SOT-23-3 (DBZ), 2.92 x 1.30 x 1.22 mm

IN STOCK: 2930pcs

Cargo cycle: 3-7 Days

The minimum order is 1