Opens in a new tab

NE555P

Precision timer, 4.5-16V, 200mA output, astable/monostable, PDIP-8

11650

Effective Inventory

Image for reference only

Manufacturer Part:

NE555P

Package:

PDIP-8 (9.81×6.35 mm, 2.54mm pitch, through-hole)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The NE555P from Texas Instruments is the industry-standard single precision timer IC. It can be configured in astable (oscillator) or monostable (one-shot) mode, generating time delays from microseconds to hours. Packaged in a PDIP-8 through-hole package, the NE555P operates from 4.5V to 16V and can source or sink up to 200 mA, making it one of the most versatile and widely used analog ICs in electronics.

Key Specifications

Supply Voltage Range 4.5V to 16V
Output Current 200 mA (source or sink)
Timing Range Microseconds to hours
Frequency (Astable) Up to 500 kHz
Initial Timing Accuracy 1% (typical)
Temperature Drift 50 ppm/°C (typical)
Trigger Voltage 1/3 VCC (typical)
Threshold Voltage 2/3 VCC (typical)
Reset Voltage 0.5V (max)
Operating Temperature 0°C to +70°C
Package PDIP-8

Features

  • Astable mode: free-running oscillator with adjustable duty cycle
  • Monostable mode: precision one-shot timer
  • High output current: 200 mA source/sink capability
  • Adjustable duty cycle from near-0% to near-100%
  • Active-low reset pin for timing interruption
  • Internal voltage divider sets 1/3 and 2/3 VCC thresholds
  • Wide supply range: 4.5V to 16V
  • Direct LED, relay, and speaker drive capability

Applications

  • Timer and delay circuits for industrial control
  • Pulse generation and clock sources
  • LED flasher and PWM dimmer circuits
  • Tone generator and alarm circuits
  • Power-up sequencing and watchdog timers
Product Introduction: NE555P Product Introduction

The NE555P from Texas Instruments is the iconic industry-standard precision timer IC. Configurable in astable (oscillator) or monostable (one-shot) mode, it generates accurate time delays from microseconds to hours. With 200 mA output drive capability, 4.5-16V supply range, and easy external component configuration, the NE555P remains one of the most versatile and widely used analog ICs for timing, oscillation, and pulse generation applications.

Working Principle: NE555P Working Principle

The NE555P contains two comparators, an SR flip-flop, a discharge transistor, and a resistive voltage divider (three 5kΩ resistors in series, hence the name). The voltage divider sets the upper comparator threshold at 2/3 VCC and the lower comparator trigger at 1/3 VCC. In monostable mode, a trigger pulse below 1/3 VCC sets the flip-flop, driving the output HIGH and turning off the discharge transistor. The timing capacitor charges through the external resistor until it reaches 2/3 VCC, which resets the flip-flop. In astable mode, the capacitor charges and discharges between 1/3 and 2/3 VCC continuously, producing a free-running oscillation.

Pin Description: NE555P Pin Definition and Functions
Pin Name Type Function
1 GND Power Ground
2 TRIG Input Trigger (active below 1/3 VCC)
3 OUT Output Output (200 mA drive capability)
4 RESET Input Reset (active-low, overrides all other inputs)
5 CTRL I/O Control voltage (bypass with 0.01µF for noise immunity)
6 THRESH Input Threshold (active above 2/3 VCC)
7 DISCH Output Discharge (open collector, connects timing cap to GND)
8 VCC Power Supply voltage (4.5-16V)
Application Scenarios: In which products and applications is NE555P used
  • Monostable timer circuits for delay and pulse-width generation
  • Astable oscillator for clock generation and PWM signals
  • LED flasher circuits with adjustable frequency and duty cycle
  • Tone and alarm generator circuits for audio alerting
  • Power-up delay and watchdog timer in embedded systems
Alternative Models: What chips are recommended as replacements for NE555P
Manufacturer Part Number Package Notes
TI NA555P PDIP-8 Higher temperature range version
TI SA555P PDIP-8 Automotive qualified version
TI LMC555CN PDIP-8 CMOS version, 1.5V-15V, low power
ON Semiconductor NE555P PDIP-8 Direct equivalent from onsemi
TI TLC555CP PDIP-8 CMOS version, 2MHz max, low power

Recommend Parts

STM32L452RCT6

Ultra-low-power ARM Cortex-M4 MCU with FPU, 80MHz, 256KB Flash, 160KB SRAM, USB FS, LQFP64

Brand: ST

Package: LQFP-64 (10x10x1.4 mm)

IN STOCK: 10650pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IS61WV51216EDBLL-10TLI

8Mb (512Kx16) ultra-low-power SRAM, 10ns, ECC, 2.2~3.6V, industrial, 44-TSOP II

Brand: Issi

Package: 44-pin TSOP II

IN STOCK: 5432pcs

Cargo cycle: 3-7 Days

The minimum order is 1

RC0603JR-0720RL

20Ω ±5% 0.1W thick film chip resistor in 0603 package for general-purpose applications

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 3216pcs

Cargo cycle: 3-7 Days

The minimum order is 1

STM32F334K8T6

ARM Cortex-M4 MCU with high-resolution timer, 72MHz, 64KB Flash, LQFP-32

Brand: ST

Package: LQFP-32 (7.0 x 7.0 mm)

IN STOCK: 14928pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CSD87330Q3D

30V 20A NexFET power block, 91% eff@15A, 5V gate drive, LSON-8 3.3×3.3mm, up to 1.5MHz, -55~150°C

Brand: TI

Package: LSON-CLIP-8 (3.3 x 3.3 x 1.0 mm, land pattern per datasheet)

IN STOCK: 4400pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TLVH431AIDBZR

Adjustable precision shunt regulator, 1.24V ref, 1% A-grade, VO=1.24-18V, IK=0.1-70mA, 0.25Ohm zKA, SOT-23-3, -40 to 85C

Brand: TI

Package: SOT-23-3 (DBZ), 2.92 x 1.30 x 1.22 mm

IN STOCK: 2930pcs

Cargo cycle: 3-7 Days

The minimum order is 1