Opens in a new tab

KIA7045AP

Voltage detector, 4.5V threshold, 3µA Iq, active-low reset, SOT-89

4560

Effective Inventory

Image for reference only

Manufacturer Part:

KIA7045AP

Package:

SOT-89 (4.5×2.5×1.5 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The KIA7045AP from KEC (Korea Electronics) is a 3-terminal voltage detector IC designed for microcontroller reset and system voltage monitoring. It detects when the supply voltage drops below a fixed 4.5V threshold and outputs an active-low reset signal. Packaged in SOT-89, it provides reliable power-on reset and brownout detection for 5V microcontroller systems without requiring external components.

Key Specifications

Detection Voltage 4.5V (fixed, ±2.4% accuracy)
Output Type Active-low (N-channel open-drain)
Operating Voltage Range 1.0V to 10V
Quiescent Current 3 µA (typical)
Output Current 5 mA (sink)
Detection Voltage Hysteresis 0.2V (typical)
Operating Temperature -30°C to +80°C
Package SOT-89 (4.5×2.5×1.5 mm)

Features

  • Fixed 4.5V detection voltage with ±2.4% accuracy
  • Ultra-low quiescent current: 3 µA typical
  • Built-in hysteresis prevents chattering near threshold
  • Active-low N-channel open-drain output
  • No external components required
  • Compact SOT-89 surface-mount package

Applications

  • Microcontroller power-on reset and brownout detection
  • 5V system voltage monitoring and reset generation
  • Battery-powered device low-voltage alarm
  • System power supply fault detection
Product Introduction: KIA7045AP Product Introduction

The KIA7045AP from KEC is a 3-terminal voltage detector IC providing fixed 4.5V threshold detection with ±2.4% accuracy. Its ultra-low 3 µA quiescent current and built-in hysteresis make it ideal for generating reliable reset signals for 5V microcontroller systems. The SOT-89 package and zero external component requirement simplify PCB design for power-on reset and brownout detection applications.

Working Principle: KIA7045AP Working Principle

The KIA7045AP uses an internal bandgap reference and resistor divider to set the detection voltage at 4.5V. A comparator continuously monitors the supply voltage against the reference. When VCC drops below 4.5V, the output transistor turns on, pulling the RESET pin LOW. When VCC rises above the release voltage (4.5V + hysteresis ≈ 4.7V), the output releases. The built-in hysteresis of approximately 0.2V prevents output oscillation when the supply voltage is near the threshold. The N-channel open-drain output requires an external pull-up resistor to the MCU supply rail.

Pin Description: KIA7045AP Pin Definition and Functions
Pin Name Type Function
1 GND Power Ground
2 VOUT Output Reset output (active-low, open-drain)
3 VCC Power Supply voltage input (monitored voltage)
Application Scenarios: In which products and applications is KIA7045AP used
  • 5V microcontroller power-on reset and brownout detection
  • System voltage monitoring with automatic reset generation
  • Battery-powered device low-voltage alarm and shutdown control
  • Power supply fault detection in embedded systems
Alternative Models: What chips are recommended as replacements for KIA7045AP
Manufacturer Part Number Package Notes
KEC KIA7033AP SOT-89 3.3V threshold version
Ricoh RN5VD45A SOT-89 4.5V detector, CMOS output
Torex XC61CC4502MR SOT-23-3 4.5V, SOT-23, smaller package
Microchip MCP111-450E/TT SOT-23-3 4.5V, open-drain, SOT-23
Seiko S-80845ALNB SOT-23-3 4.5V detector, SOT-23

Recommend Parts

MCP6S26-I

6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

Brand: MICROCHIP

Package: SOIC-14 (150 mils body width)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MM3Z9V1

9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

Brand: ON

Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

IN STOCK: 10735pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT89S51

8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

Package: PDIP-40 / TQFP-44 / PLCC-44

IN STOCK: 15000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

GD32F303CBT6

Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

Brand: gigadevice

Package: LQFP-48 (7x7mm, 0.5mm pitch)

IN STOCK: 3342pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MIC5205-3.3YM5-TR

3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

Brand: MICROCHIP

Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

IN STOCK: 9858pcs

Cargo cycle: 3-7 Days

The minimum order is 1