Opens in a new tab

MAX7219CNG

LED display driver, 8-digit 7-seg or 8×8 matrix, SPI, 24-PDIP

9589

Effective Inventory

Image for reference only

Manufacturer Part:

MAX7219CNG

Package:

24-PDIP

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The MAX7219CNG from Analog Devices (Maxim Integrated) is a compact serial-input/output common-cathode display driver that interfaces microprocessors to 7-segment numeric LED displays (up to 8 digits) or 8×8 LED matrices. With SPI interface and individual digit control, it requires only 3 I/O pins from the MCU. Packaged in 24-PDIP.

Key Specifications

Display Type 7-segment (8 digits) or 8×8 LED matrix
Interface SPI (3-wire: CLK, LOAD, DIN)
Segment Current Up to 40mA per segment
Digits 8 (7-segment) or 64 individual LEDs
Supply Voltage 4.0V to 5.5V
Segment Drive Constant current (programmable via RSET)
Dimming 16 levels (digital control)
Cascade Yes (DOUT to next DIN)
Package 24-PDIP
Operating Temperature 0 to +70 C

Features

  • SPI interface requires only 3 MCU I/O pins
  • Built-in BCD to 7-segment decoder
  • Programmable segment current via external resistor
  • 16-level digital brightness control
  • Cascadable for larger displays
  • Display blank mode for multiplexing control

Applications

  • 7-segment LED display panels
  • 8×8 LED matrix displays
  • Clock and counter displays
  • LED message boards (cascaded)
Product Introduction: MAX7219CNG Product Introduction

The MAX7219CNG from Analog Devices (Maxim Integrated) is a serial-interfaced LED display driver that controls up to 8 digits of 7-segment displays or an 8×8 LED matrix using only 3 MCU I/O pins (DIN, CLK, LOAD). It includes a built-in BCD-to-7-segment decoder, so the MCU sends BCD digit values rather than segment patterns. Segment current is set by a single external resistor (RSET), eliminating the need for individual current-limiting resistors on each LED. The 16-level digital dimming control adjusts brightness without changing RSET. The display can be cascaded by connecting the DOUT of one device to the DIN of the next, enabling large LED matrix displays with the same 3-wire interface. The MAX7219 handles all the multiplexing, refresh, and current control internally, offloading the MCU from display scanning tasks.

Working Principle: MAX7219CNG Working Principle

The MAX7219CNG receives 16-bit serial data words via the SPI-like interface (DIN, CLK, LOAD). Each 16-bit word consists of an 8-bit register address (upper byte) and 8-bit data (lower byte). The LOAD pin latches the data on its rising edge. For 7-segment displays, the digit registers (0x01-0x08) contain BCD values that are decoded to segment patterns by the internal BCD decoder. Alternatively, segment registers can be written directly for custom patterns or LED matrix control. The multiplex scan rate is approximately 800Hz (set by internal oscillator), fast enough to avoid visible flicker. Segment current is determined by RSET: Iseg = 100 x (1.26V / RSET). For 20mA segments, RSET = 100 x 1.26/0.020 = 6.3kOhm. The brightness register (0x0A) scales all segment currents from 1/16 to 31/32 of the RSET-set value. Cascaded devices share CLK and LOAD but chain DIN to DOUT.

Pin Description: MAX7219CNG Pin Definition and Functions
Pin Name Function
1 DIN Serial data input
2-3 DIG0-1 Digit 0-1 common cathode drives
4-8 DIG2-6 Digit 2-6 common cathode drives
9 GND Ground
10-11 DIG7 Digit 7 common cathode drive
12 LOAD Chip select / data latch (active low)
13 CLK Serial clock input (max 10MHz)
14-17 SEG A-D Segment A-D current source outputs
18-22 SEG E-G,DP Segment E-G, DP current source outputs
23 SET RSET resistor to VCC (sets segment current)
24 VCC +5V supply
19 DOUT Serial data output (cascade)
Application Scenarios: In which products and applications is MAX7219CNG used
  • 8-digit 7-segment clock display using SPI with BCD decode and 16-level dimming
  • 8×8 LED matrix display with cascaded MAX7219 for scrolling message boards
  • Instrument panel with 3-wire SPI interface replacing 16+ I/O direct drive
  • LED counter display with programmable brightness for ambient light adaptation
Alternative Models: What chips are recommended as replacements for MAX7219CNG
Model Manufacturer Key Difference
MAX7221CNG ADI SPI-compatible (no decoded mode), cluster compatible
HT16K33 Holtek I2C interface, 16×8 LED driver, built-in matrix
TM1637 Titan Micro 4-digit only, 2-wire, lower cost, very popular
IS31FL3731 Lumissil I2C, 16×9 matrix, per-LED PWM, Charlieplex

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1