Opens in a new tab

MCP4812T-E/SN

Dual 10-bit DAC, SPI, 2.048V int ref, AEC-Q100, SOIC-8

7654

Effective Inventory

Image for reference only

Manufacturer Part:

MCP4812T-E/SN

Package:

SOIC-8 (4.9 x 3.9 x 1.75 mm, 1.27mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The MCP4812T-E/SN from Microchip is a dual-channel 10-bit voltage output DAC with internal 2.048V reference and SPI interface in an 8-pin SOIC package. Operating from 2.7V to 5.5V, it features 4.5 µs settling time, selectable 1x or 2x gain output, INL of ±0.5 LSB (typ), and DNL of ±0.1 LSB (typ). AEC-Q100 Grade 1 qualified, it supports simultaneous DAC updates via the LDAC pin and includes a power-on reset circuit.

Key Specifications

Resolution 10 bits
Number of DAC Channels 2
Output Type Voltage (buffered, rail-to-rail)
Internal Voltage Reference 2.048V
Output Gain 1x or 2x (selectable)
Settling Time 4.5 µs (typ)
INL (typ) ±0.5 LSB
DNL (typ) ±0.1 LSB
Gain Error ±2% FSR
Interface SPI (3-wire, Microwire compatible)
Supply Voltage 2.7V to 5.5V
Supply Current (typ) 415 µA
Operating Temperature -40°C to +125°C
Package SOIC-8 (4.9 x 3.9 mm)

Features

  • Dual 10-bit DAC with independent output channels
  • Internal 2.048V voltage reference
  • Selectable unity or 2x gain output
  • 4.5 µs settling time (typical)
  • Rail-to-rail output swing
  • SPI interface with 20 MHz clock support
  • Simultaneous DAC update via LDAC pin
  • Power-on Reset (POR) for reliable startup
  • AEC-Q100 Grade 1 qualified for automotive
  • Double-buffered input registers

Applications

  • Set point and offset trimming in control systems
  • Sensor calibration and compensation
  • Portable instrumentation and battery-powered devices
  • Optical communication device calibration
  • Automotive analog output generation
Product Introduction: MCP4812T-E/SN Product Introduction

The MCP4812T-E/SN from Microchip is a dual-channel 10-bit voltage output DAC with an internal 2.048V reference in an 8-pin SOIC package. Operating from 2.7V to 5.5V, it features 4.5 µs settling time, selectable 1x/2x gain output, rail-to-rail output swing, and SPI interface up to 20 MHz. AEC-Q100 Grade 1 qualified with double-buffered registers and LDAC pin for simultaneous updates, it is designed for set point control, sensor calibration, and portable instrumentation applications.

Working Principle: MCP4812T-E/SN Working Principle

The MCP4812T-E/SN uses a resistor-string DAC architecture where the digital input code selects a tap point along a precision resistor divider chain connected to the internal 2.048V reference. This architecture inherently provides low DNL error (±0.1 LSB typ) and monotonicity without missing codes. The output buffer amplifier provides rail-to-rail output swing and can be configured for 1x gain (0 to VREF output) or 2x gain (0 to 2×VREF output) via the gain selection bit in the SPI command word. Double-buffered input registers allow both DAC channels to be loaded independently via SPI, then updated simultaneously using the LDAC (latch DAC) pin for synchronized output changes. The SPI interface supports clock rates up to 20 MHz for fast updates. The Power-on Reset (POR) circuit ensures both DAC outputs start at zero-scale during power-up, preventing glitch outputs. The 415 µA typical supply current enables battery-powered operation.

Pin Description: MCP4812T-E/SN Pin Definition and Functions
Pin Name Type Function
1 VDD Power Supply voltage (2.7V to 5.5V)
2 CS# Input Chip Select (active low)
3 SCK Input Serial Clock input
4 SDI Input Serial Data Input
5 LDAC# Input Latch DAC input (active low, simultaneous update)
6 VOUTB Output DAC Channel B analog output
7 VSS Power Ground
8 VOUTA Output DAC Channel A analog output
Application Scenarios: In which products and applications is MCP4812T-E/SN used
  • Set point and offset trimming in closed-loop control systems
  • Sensor calibration and compensation circuits
  • Portable and battery-powered instrumentation
  • Optical communication device bias calibration
  • Automotive analog reference and control voltage generation
Alternative Models: What chips are recommended as replacements for MCP4812T-E/SN
Manufacturer Part Number Package Notes
Microchip MCP4802T-E/SN SOIC-8 8-bit version, same family
Microchip MCP4822T-E/SN SOIC-8 12-bit version, higher resolution
Microchip MCP4812T-E/MS MSOP-8 Same spec, smaller MSOP package
Texas Instruments DAC60508ZRTER VQFN-16 8-channel 12-bit DAC
Analog Devices AD5662BRJZ-1 SOT-23-8 16-bit, single channel nanoDAC

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1