Opens in a new tab

SN74LVC1G04DBVR

Single inverter gate, 1.65-5.5V, 3.3ns tpd, SOT-23-5

32567

Effective Inventory

Image for reference only

Manufacturer Part:

SN74LVC1G04DBVR

Package:

SOT-23-5 (2.9 x 2.8 x 1.45 mm, 0.95mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The SN74LVC1G04DBVR from Texas Instruments is a single inverter gate in a 5-pin SOT-23 package, designed for 1.65V to 5.5V VCC operation. It performs the Boolean function Y = NOT(A) with a maximum propagation delay of 3.3ns at 3.3V. Featuring ±24mA output drive at 3.3V, over-voltage tolerant inputs up to 5.5V, Ioff circuitry for live insertion, and low 10µA static supply current, it supports partial-power-down and mixed-voltage designs across the -40°C to +125°C range.

Key Specifications

Logic Function Single Inverter (Y = NOT A)
Number of Channels 1
Supply Voltage (VCC) 1.65V to 5.5V
Input Voltage Tolerance Up to 5.5V (over-voltage tolerant)
Propagation Delay (tpd) 3.3 ns max at 3.3V
Output Drive Current ±24 mA at 3.3V
Static Supply Current (ICC) 10 µA max
Input Capacitance 7 pF (typical)
Output Type Push-Pull (CMOS)
Ioff Support Yes (live insertion, partial-power-down)
ESD Protection 2000V HBM, 200V MM, 1000V CDM
Operating Temperature -40°C to +125°C
Package SOT-23-5 (2.9 x 2.8 mm)

Features

  • Single inverter gate performing Y = NOT(A)
  • Wide VCC operating range: 1.65V to 5.5V
  • Over-voltage tolerant inputs accept up to 5.5V
  • 3.3ns maximum propagation delay at 3.3V
  • ±24mA balanced output drive at 3.3V
  • Ioff circuitry for live insertion and partial-power-down
  • 10µA maximum static supply current
  • Comprehensive ESD protection (2000V HBM)
  • latch-up immunity exceeds 100mA (JESD 78 Class II)
  • Multiple package options (SOT-23, SC70, X2SON, USON, DSBGA)

Applications

  • Logic inversion and level translation in mixed-voltage systems
  • Signal conditioning and buffer/driver applications
  • LED drive and indicator circuits
  • Board-level glue logic in space-constrained designs
  • Hot-swap and live-insertion capable systems
Product Introduction: SN74LVC1G04DBVR Product Introduction

The SN74LVC1G04DBVR from Texas Instruments is a single inverter gate in a compact SOT-23-5 package, operating from 1.65V to 5.5V. It performs the Boolean function Y = NOT(A) with a maximum propagation delay of 3.3ns at 3.3V and ±24mA output drive. Over-voltage tolerant inputs up to 5.5V and Ioff circuitry enable mixed-voltage designs and live insertion. With 10µA max static current and -40°C to +125°C operation, it is ideal for logic inversion, level translation, and glue logic in space-constrained applications.

Working Principle: SN74LVC1G04DBVR Working Principle

The SN74LVC1G04DBVR is a single-stage CMOS inverter gate that performs the Boolean function Y = NOT(A). When the input A is at logic HIGH (near VCC), the PMOS transistor turns off and the NMOS transistor turns on, pulling the output Y to logic LOW (near GND). Conversely, when the input is logic LOW, the PMOS turns on and the NMOS turns off, pulling the output HIGH. The push-pull CMOS output stage provides symmetrical ±24mA drive capability at 3.3V, enabling it to drive moderate capacitive loads directly. The input stage is designed to tolerate voltages up to 5.5V regardless of VCC, allowing the device to be used as a level translator from higher-voltage logic to a lower-voltage domain. The Ioff circuitry ensures that when VCC is 0V, the output enters a high-impedance state, preventing damaging backflow current during partial-power-down or live insertion events. The internal ESD protection clamps on all pins provide robustness against electrostatic discharge events.

Pin Description: SN74LVC1G04DBVR Pin Definition and Functions
Pin Name Type Function
1 A Input Data input (over-voltage tolerant to 5.5V)
2 GND Power Ground
3 Y Output Data output (push-pull, inverted from A)
4 NC — No connect (or VCC on some variants)
5 VCC Power Supply voltage (1.65V to 5.5V)
Application Scenarios: In which products and applications is SN74LVC1G04DBVR used
  • Logic signal inversion in microcontroller and FPGA designs
  • Voltage level translation between 3.3V and 5V logic domains
  • LED indicator drive circuits with ±24mA output capability
  • Glue logic for board-level signal routing in constrained layouts
  • Hot-swap and live-insertion card applications using Ioff feature
Alternative Models: What chips are recommended as replacements for SN74LVC1G04DBVR
Manufacturer Part Number Package Notes
Texas Instruments SN74LVC1G04DCKR SC70-5 Smaller package, same function
Texas Instruments SN74LVC1G04DPWR X2SON-5 Ultra-small 0.8×0.8mm package
Nexperia 74LVC1G04GW SOT353-5 Pin-compatible alternative
ON Semiconductor NC7SV04P5X SOT-23-5 1.65-5.5V, similar specs
Diodes Inc 74LVC1G04DW-7 SOT-23-5 Cost-effective alternative

Recommend Parts

MCP6S26-I

6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

Brand: MICROCHIP

Package: SOIC-14 (150 mils body width)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MM3Z9V1

9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

Brand: ON

Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

IN STOCK: 10735pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT89S51

8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

Package: PDIP-40 / TQFP-44 / PLCC-44

IN STOCK: 15000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

GD32F303CBT6

Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

Brand: gigadevice

Package: LQFP-48 (7x7mm, 0.5mm pitch)

IN STOCK: 3342pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MIC5205-3.3YM5-TR

3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

Brand: MICROCHIP

Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

IN STOCK: 9858pcs

Cargo cycle: 3-7 Days

The minimum order is 1