Opens in a new tab

LMV358IDGKR

Dual RRIO op-amp, 2.7-5.5V, 1MHz GBW, VSSOP-8

14371

Effective Inventory

Image for reference only

Manufacturer Part:

LMV358IDGKR

Package:

VSSOP-8 (3 x 4.9 x 1.45 mm, 0.65mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The LMV358IDGKR from Texas Instruments is a dual low-voltage rail-to-rail output operational amplifier in an 8-pin VSSOP (DGK) package. Operating from 2.7V to 5.5V, it features 1MHz gain-bandwidth product, 1V/µs slew rate, 210µA total supply current (dual), and zero crossover distortion. With an input common-mode range extending 0.2V below the negative rail and rail-to-rail output swing, it is optimized for low-voltage single-supply applications as a cost-effective replacement for LM358 in 5V systems.

Key Specifications

Number of Channels 2 (Dual)
Supply Voltage Range 2.7V to 5.5V
Gain-Bandwidth Product 1 MHz (typical)
Slew Rate 1 V/µs (typical)
Input Offset Voltage 7 mV max (at 25°C)
Input Offset Drift 5 µV/°C (typical)
Input Bias Current 250 nA max
CMRR 65 dB (typical)
Supply Current (both channels) 210 µA (typical)
Output Current 40 mA (typical)
Input Common-Mode Range -0.2V to VCC-0.8V
Output Swing (to V-) 65 mV (typical, no load)
Output Swing (to V+) 120 mV (typical, no load)
Voltage Noise (1kHz) 39 nV/√Hz (typical)
Operating Temperature -40°C to +125°C
Package VSSOP-8 (3 x 4.9 mm)

Features

  • Dual low-voltage operational amplifier
  • Rail-to-rail output swing
  • Input common-mode range includes ground (-0.2V below V-)
  • 1MHz gain-bandwidth product
  • Zero crossover distortion output stage
  • 210µA total quiescent current (both channels)
  • Direct upgrade path to LMV358A for improved precision
  • 2.7V to 5.5V single-supply operation
  • ESD protection: 2000V HBM, 1000V CDM
  • Cost-effective replacement for LM358 in low-voltage systems

Applications

  • Battery-powered instrumentation and signal conditioning
  • Low-voltage sensor interface and amplification
  • Active filter circuits in portable electronics
  • Audio preamplifiers and buffer circuits
  • Single-supply analog signal processing
Product Introduction: LMV358IDGKR Product Introduction

The LMV358IDGKR from Texas Instruments is a dual low-voltage rail-to-rail output operational amplifier in an 8-pin VSSOP package. Operating from 2.7V to 5.5V, it delivers 1MHz gain-bandwidth product, 1V/µs slew rate, and zero crossover distortion. With input common-mode range extending 0.2V below ground and rail-to-rail output swing, it consumes only 210µA total quiescent current. A cost-effective drop-in for LM358 in 5V and below systems, it is ideal for battery-powered instrumentation, sensor interfaces, and portable signal conditioning.

Working Principle: LMV358IDGKR Working Principle

The LMV358IDGKR integrates two independent operational amplifiers using a bipolar input stage optimized for low-voltage operation. The input stage supports a common-mode range from 0.2V below the negative rail (ground in single-supply) to approximately VCC – 0.8V, enabling ground-sensing applications. The output stage uses a complementary push-pull architecture with rail-to-rail output swing (within 65mV of ground and 120mV of VCC under no load) and zero crossover distortion, achieved by ensuring both the NPN and PNP output transistors are never simultaneously off during output transitions. The 1MHz gain-bandwidth product and 1V/µs slew rate support moderate-speed signal processing. The 210µA total supply current (both channels) makes it efficient for battery-powered designs. Internal compensation provides unity-gain stability without external components. The Ioff feature is not included (unlike the LVC logic family), but the device withstands input voltages up to 5.5V on any pin without latch-up.

Pin Description: LMV358IDGKR Pin Definition and Functions
Pin Name Type Function
1 1OUT Output Channel 1 output
2 1IN- Input Channel 1 inverting input
3 1IN+ Input Channel 1 non-inverting input
4 GND Power Ground (negative supply)
5 2IN+ Input Channel 2 non-inverting input
6 2IN- Input Channel 2 inverting input
7 2OUT Output Channel 2 output
8 VCC Power Positive supply (2.7V to 5.5V)
Application Scenarios: In which products and applications is LMV358IDGKR used
  • Battery-powered portable instrumentation and medical devices
  • Low-voltage sensor signal conditioning and amplification
  • Active RC filters in single-supply audio and data acquisition
  • Current-sense amplification in power management circuits
  • General-purpose analog signal processing in 3.3V and 5V systems
Alternative Models: What chips are recommended as replacements for LMV358IDGKR
Manufacturer Part Number Package Notes
Texas Instruments LMV358AIDGKR VSSOP-8 Upgraded version, lower offset (4mV), lower noise
Texas Instruments LMV358IDR SOIC-8 Same die, larger SOIC package
Texas Instruments LMV358IPWR TSSOP-8 Same die, TSSOP package option
Analog Devices OPA2314AIDGKR VSSOP-8 3MHz GBW, RRIO, precision upgrade
Microchip MCP6002-I/SN SOIC-8 1MHz GBW, RRIO, 1.8V min supply

Recommend Parts

MCP6S26-I

6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

Brand: MICROCHIP

Package: SOIC-14 (150 mils body width)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MM3Z9V1

9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

Brand: ON

Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

IN STOCK: 10735pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT89S51

8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

Package: PDIP-40 / TQFP-44 / PLCC-44

IN STOCK: 15000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

GD32F303CBT6

Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

Brand: gigadevice

Package: LQFP-48 (7x7mm, 0.5mm pitch)

IN STOCK: 3342pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MIC5205-3.3YM5-TR

3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

Brand: MICROCHIP

Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

IN STOCK: 9858pcs

Cargo cycle: 3-7 Days

The minimum order is 1