Product Overview
The LM293DR from Texas Instruments is a dual differential comparator with low input offset voltage, operating from single 2V to 36V or dual +/-1V to +/-18V supplies in an SOIC-8 package.
Key Specifications
| Type | Dual Differential Comparator |
| Channels | 2 |
| Supply Voltage | 2 V to 36 V (single) or +/-1 V to +/-18 V |
| Input Offset Voltage | 1 mV (typical) |
| Response Time | 1.3 us (typical) |
| Input Bias Current | 25 nA (typical) |
| Output Current | 16 mA (sink) |
| Package | SOIC-8 |
| Operating Temperature | -25C to +85C |
Features
- Wide 2 V to 36 V single supply range
- Low 1 mV typical input offset voltage
- Open-collector outputs for wire-OR
- Input common-mode range includes ground
- Low input bias current (25 nA typical)
- Zero-crossing detection
- Voltage level comparison and monitoring
- Oscillator and timing circuits
- Window comparators and threshold detectors
- AC zero-crossing detector for TRIAC phase control
- Battery low-voltage monitoring with hysteresis
- Window comparator for over/under voltage protection
- Relaxation oscillator for LED flasher circuits
Applications
Product Introduction: LM293DR Product Introduction
The LM293DR from Texas Instruments is a dual differential comparator designed for operation from a single 2 V to 36 V supply or dual +/-1 V to +/-18 V supplies. The device features low 1 mV typical input offset voltage and fast 1.3 us response time, making it suitable for precision voltage comparison applications. The open-collector outputs allow wire-OR connection and interface with logic families from 5 V to 36 V. The input common-mode voltage range includes ground, enabling single-supply operation without level shifting. The LM293 is the industrial temperature grade of the popular LM393/LM293/LM393 family.
Working Principle: LM293DR Working Principle
The LM293DR contains two independent voltage comparators. Each comparator has inverting (-) and non-inverting (+) inputs and an open-collector output. When the voltage at the non-inverting input exceeds the voltage at the inverting input, the output transistor turns off, and the output goes HIGH (determined by the external pull-up resistor). When the inverting input voltage exceeds the non-inverting input, the output transistor turns on, pulling the output LOW. The open-collector output configuration allows the output to sink up to 16 mA and enables wire-OR connections where multiple comparator outputs share a single pull-up resistor. The input stage uses PNP transistors, allowing the common-mode input range to extend to ground (0 V) for single-supply operation.
Pin Description: LM293DR Pin Definition and Functions
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1OUT | Output | Comparator 1 output (open-collector) |
| 2 | 1IN- | Input | Comparator 1 inverting input |
| 3 | 1IN+ | Input | Comparator 1 non-inverting input |
| 4 | GND | Power | Ground / negative supply |
| 5 | 2IN+ | Input | Comparator 2 non-inverting input |
| 6 | 2IN- | Input | Comparator 2 inverting input |
| 7 | 2OUT | Output | Comparator 2 output (open-collector) |
| 8 | V+ | Power | Positive supply (2-36V) |
Application Scenarios: In which products and applications is LM293DR used
Alternative Models: What chips are recommended as replacements for LM293DR
| Manufacturer | Part Number | Package | Notes |
|---|---|---|---|
| TI | LM393DR | SOIC-8 | 0-70C commercial grade |
| TI | LM2903DR | SOIC-8 | Automotive grade, same family |
| ST | LM293DT | SOIC-8 | Pin-compatible equivalent |
| onsemi | LM293DR2G | SOIC-8 | Pin-compatible equivalent |
| Microchip | MCP6541T-I/SN | SOIC-8 | CMOS, push-pull, lower power |
Recommend Parts

W25Q80VSSI
8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V
Brand: Winbond
Package: SOIC-8 208mil (5.3×8.0mm)
IN STOCK: 4316pcs
Cargo cycle: 3-7 Days
The minimum order is 1

AT89S51
8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.
Brand: Atmel (Microchip)
Package: PDIP-40 / TQFP-44 / PLCC-44
IN STOCK: 15000pcs
Cargo cycle: 3-7 Days
The minimum order is 1

GD32F303CBT6
Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48
Brand: gigadevice
Package: LQFP-48 (7x7mm, 0.5mm pitch)
IN STOCK: 3342pcs
Cargo cycle: 3-7 Days
The minimum order is 1

MIC5205-3.3YM5-TR
3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5
Brand: MICROCHIP
Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)
IN STOCK: 9858pcs
Cargo cycle: 3-7 Days
The minimum order is 1








