Opens in a new tab

DS3231MZ+TRL

I2C RTC with TCXO, +/-5ppm, 2 Alarms, Battery Backup, SOIC-8

8765

Effective Inventory

Image for reference only

Manufacturer Part:

DS3231MZ+TRL

Package:

SOIC-8 (4.9 x 3.9 x 1.5 mm, 150mil)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The DS3231MZ+TRL from Analog Devices (Maxim Integrated) is an I2C RTC with integrated TCXO and crystal, +/-5 ppm accuracy, and two programmable alarms in an 8-pin SOIC package.

Key Specifications

Type I2C Real-Time Clock with Integrated TCXO and Crystal
Interface I2C (400 kHz max)
Time Accuracy +/-5 ppm @ +25C (+/-0.432 s/day)
Supply Voltage 2.3 V to 5.5 V
Battery Backup Current 3 uA (typical @ 3.63V)
Temperature Range for Accuracy -40C to +85C (+/-5 ppm)
Alarms 2 programmable
Square Wave Output 1 Hz, 1.024 kHz, 4.096 kHz, 8.192 kHz
SRAM 23 bytes (battery-backed)
Package SOIC-8 (150 mil)
Operating Temperature -40C to +85C

Features

  • Integrated TCXO and crystal – no external crystal needed
  • +/-5 ppm accuracy over -40C to +85C
  • +/-2 ppm accuracy at +25C
  • I2C interface up to 400 kHz
  • Two time-of-day alarms
  • Programmable square wave output
  • 23 bytes battery-backed user SRAM
  • Power-fail monitor and switchover

Applications

  • Data logging timestamping
  • Embedded system real-time clock
  • Power meter time-of-use billing
  • Industrial controller scheduling
Product Introduction: DS3231MZ+TRL Product Introduction

The DS3231MZ+TRL from Analog Devices (formerly Maxim Integrated) is a low-cost I2C real-time clock (RTC) with an integrated temperature-compensated crystal oscillator (TCXO). The device eliminates the need for an external 32.768 kHz crystal, as both the oscillator and crystal are integrated in the 8-pin SOIC package. The TCXO provides +/-5 ppm accuracy over the full -40C to +85C temperature range and +/-2 ppm at +25C, resulting in less than +/-0.432 seconds per day drift. The device includes two programmable time-of-day alarms, a programmable square wave output at 1 Hz, 1.024 kHz, 4.096 kHz, or 8.192 kHz, and 23 bytes of battery-backed user SRAM. The power-fail circuit automatically switches to battery backup when VCC drops below VBAT.

Working Principle: DS3231MZ+TRL Working Principle

The DS3231MZ+TRL integrates a 32.768 kHz MEMS (Micro-Electro-Mechanical System) resonator with a temperature-compensated oscillator circuit on a single die. An on-chip temperature sensor measures the die temperature periodically (once per 64 seconds by default) and the digital compensation engine adjusts the oscillator load capacitance to maintain the target frequency. The temperature compensation polynomial is factory-calibrated for each device, storing compensation coefficients in non-volatile memory. The RTC counter chain divides the 32.768 kHz oscillator output down to 1 Hz and maintains seconds, minutes, hours, day, date, month, and year registers, automatically handling leap years through 2100. The I2C interface (address 0x68) provides read/write access to all time, alarm, and control registers. The power-switching circuit monitors VCC and switches to VBAT when VCC falls below the power-fail threshold (approximately 2.45V), maintaining timekeeping with only 3 uA battery current.

Pin Description: DS3231MZ+TRL Pin Definition and Functions
Pin Name Type Function
1 VBAT Power Battery backup supply (2.3-5.5V)
2 SDA I/O I2C serial data
3 SCL Input I2C serial clock
4 GND Ground Ground
5 32KHZ Output 32.768 kHz output (enabled by control bit)
6 INT/SQW Output Alarm interrupt or square wave output
7 NC – No connect
8 VCC Power Main supply (2.3-5.5V)
Application Scenarios: In which products and applications is DS3231MZ+TRL used
  • Industrial data logger with precise timestamping and battery backup
  • Power meter time-of-use tariff scheduling with +/-5ppm accuracy
  • Security camera event timestamp with I2C interface
  • GPS-denied timing system with autonomous clock reference
Alternative Models: What chips are recommended as replacements for DS3231MZ+TRL
Manufacturer Part Number Package Notes
ADI DS3231SN+TRL SOIC-16 More pins, same core, 32KHz output
Microchip MCP7940N-I/SN SOIC-8 Requires external crystal, lower cost
ST M41T81S SOIC-8 Requires external crystal, similar function
Epson RX8130CE SOP-14 Integrated crystal, similar accuracy
ADI DS3232MZ+TRL SOIC-8 Same + 256 bytes SRAM

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1