Opens in a new tab

MCP3421A0T-E/CH

18-Bit Delta-Sigma ADC, I2C, PGA 1-8x, 2.048V Ref, SOT-23-6

16299

Effective Inventory

Image for reference only

Manufacturer Part:

MCP3421A0T-E/CH

Package:

SOT-23-6 (2.9 x 1.6 x 1.1 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The MCP3421A0T-E/CH from Microchip Technology is an 18-bit delta-sigma ADC with I2C interface, onboard 2.048V reference, and programmable gain amplifier (PGA) in a tiny SOT-23-6 package.

Key Specifications

Type 18-Bit Delta-Sigma ADC with I2C Interface
Resolution 18 / 16 / 14 / 12 bits (selectable)
Sample Rate 3.75 / 15 / 60 / 240 SPS
Input Type 1 differential
Reference Voltage 2.048V internal (+/-0.05%, 5 ppm/C)
PGA Gain 1x, 2x, 4x, 8x
INL 10 ppm of FSR (max)
Interface I2C (Standard/Fast/High-Speed)
Supply Voltage 2.7 V to 5.5 V
Supply Current 145 uA (continuous), 39 uA (1 SPS one-shot)
Package SOT-23-6
Operating Temperature -40C to +125C

Features

  • 18-bit resolution in tiny SOT-23-6 package
  • Onboard 2.048V reference with 5 ppm/C drift
  • Programmable gain amplifier (1x to 8x)
  • Self-calibration of offset and gain per conversion
  • One-shot and continuous conversion modes
  • I2C interface with standard/fast/high-speed modes
  • Ultra-low 39 uA in one-shot mode at 1 SPS

Applications

  • Precision weigh scales and strain gauges
  • Temperature sensing with RTD/thermocouple
  • Battery fuel gauging
  • Portable instrumentation
Product Introduction: MCP3421A0T-E/CH Product Introduction

The MCP3421A0T-E/CH from Microchip Technology is a single-channel 18-bit delta-sigma ADC in a tiny SOT-23-6 package. The device integrates a precision 2.048V reference (+/-0.05%, 5 ppm/C drift), programmable gain amplifier (1x/2x/4x/8x), and an internal oscillator. Resolution and sample rate are programmable: 18-bit at 3.75 SPS, 16-bit at 15 SPS, 14-bit at 60 SPS, or 12-bit at 240 SPS. The onboard PGA allows direct measurement of small signals like thermocouple outputs and strain gauge bridges without external amplification. Self-calibration of offset and gain is performed automatically on each conversion. The one-shot mode reduces supply current to just 39 uA for battery-powered applications.

Working Principle: MCP3421A0T-E/CH Working Principle

The MCP3421A0T-E/CH uses a third-order delta-sigma modulator followed by a digital decimation filter. The modulator oversamples the input at a high frequency (approximately 3.072 MHz internal clock) and converts the analog signal into a 1-bit data stream. The decimation filter reduces the data rate to the selected output rate (3.75 to 240 SPS) while increasing effective resolution. Higher oversampling ratios (lower output rates) provide more resolution: 18 bits at 3.75 SPS requires 2^17 = 131072 oversampling ratio. The PGA before the modulator amplifies small input signals up to 8x, improving the signal-to-noise ratio for low-level inputs. The onboard 2.048V reference sets the full-scale range at +/-2.048V / PGA. Each conversion includes automatic offset and gain calibration, where the modulator measures internal zero and full-scale references and applies digital correction to the output code. The I2C interface provides read access to conversion results and write access to configuration bits (PGA gain, sample rate, conversion mode).

Pin Description: MCP3421A0T-E/CH Pin Definition and Functions
Pin Name Type Function
1 SCL Input I2C clock
2 SDA I/O I2C data
3 VSS Ground Ground
4 VIN+ Input Differential non-inverting input
5 VIN- Input Differential inverting input
6 VDD Power Supply voltage (2.7-5.5V)
Application Scenarios: In which products and applications is MCP3421A0T-E/CH used
  • 24-bit effective weigh scale using 18-bit ADC with PGA x8 for load cell
  • K-type thermocouple temperature measurement with cold junction compensation
  • 4-20mA current loop receiver with 250 Ohm shunt and 18-bit ADC
  • Portable battery fuel gauge with one-shot mode for power saving
Alternative Models: What chips are recommended as replacements for MCP3421A0T-E/CH
Manufacturer Part Number Package Notes
Microchip MCP3422A0-E/SN SOIC-8 2-channel version
Microchip MCP3424SL SOIC-14 4-channel version
TI ADS1115IDGSR VSSOP-10 16-bit, 4-ch, similar class
ADI AD7124-4BCPZ LFCSP-24 24-bit, 4-ch, higher performance
Microchip MCP3561R TSSOP-20 24-bit, SPI, upgrade path

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1