Opens in a new tab

AD713JRZ-16

Quad BiFET Op Amp, 16V/us, 4MHz, 1us 0.01% Settling, SOIC-16

1234

Effective Inventory

Image for reference only

Manufacturer Part:

AD713JRZ-16

Package:

SOIC-16 (10.3 x 7.5 x 1.5 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The AD713JRZ-16 from Analog Devices is a quad precision BiFET operational amplifier with 16 V/us slew rate and 4 MHz bandwidth, the quad version of the AD711, in an SOIC-16 package.

Key Specifications

Type Quad Precision BiFET Operational Amplifier
Channels 4
Supply Voltage +/-4.5 V to +/-18 V
Slew Rate 16 V/us (minimum)
Gain Bandwidth Product 4 MHz
Input Offset Voltage 2 mV (max, J grade)
Input Bias Current 15 pA (typical)
Settling Time 1 us to +/-0.01%
Supply Current per Channel 2.5 mA (typical)
Package SOIC-16
Operating Temperature 0C to +70C (J grade)

Features

  • Quad version of the AD711 precision BiFET op amp
  • 16 V/us minimum slew rate
  • 1 us settling time to +/-0.01%
  • Ultra-low 15 pA input bias current
  • 300 uV typical offset voltage
  • 88 dB CMRR
  • Enhanced replacement for TL084 and LF347

Applications

  • Multi-channel active filters
  • Precision multi-channel signal conditioning
  • 4-channel DAC/ADC buffer arrays
  • Professional audio mixing consoles
Product Introduction: AD713JRZ-16 Product Introduction

The AD713JRZ-16 from Analog Devices is the quad version of the AD711 precision BiFET operational amplifier. All four channels share the same high-performance BiFET process with 15 pA input bias current, 16 V/us minimum slew rate, and 1 us settling time to +/-0.01%. The device is an enhanced replacement for the industry-standard TL084 and LF347, offering superior DC precision (300 uV typical offset vs. 3-5 mV for TL084) and faster settling time. The SOIC-16 package provides a compact footprint for 4-channel applications. Note: This product is not recommended for new designs; the ADA4610-4 is the recommended replacement with rail-to-rail output and improved performance.

Working Principle: AD713JRZ-16 Working Principle

The AD713JRZ-16 uses the same BiFET (Bipolar + JFET) process as the AD711, with ion-implanted JFET input transistors providing 15 pA input bias current and bipolar gain and output stages delivering 16 V/us slew rate. Each of the four amplifier channels is independent with dedicated input and output pins, sharing only the supply rails. The laser-trimmed input offset voltage of 300 uV typical (J grade) is achieved through wafer-level trimming. The 1 us settling time to +/-0.01% (approximately 12-bit accuracy) makes it suitable as a DAC output buffer in data acquisition systems. The class AB output stage can drive 600 Ohm loads with adequate output swing. The internal compensation ensures stability in gains of 1 or greater.

Pin Description: AD713JRZ-16 Pin Definition and Functions
Pin Name Type Function
1 1OUT Output Channel 1 output
2 1IN- Input Channel 1 inverting input
3 1IN+ Input Channel 1 non-inverting input
4 VS+ Power Positive supply
5 2IN+ Input Channel 2 non-inverting input
6 2IN- Input Channel 2 inverting input
7 2OUT Output Channel 2 output
8 3OUT Output Channel 3 output
9 3IN- Input Channel 3 inverting input
10 3IN+ Input Channel 3 non-inverting input
11 VS- Power Negative supply
12 4IN+ Input Channel 4 non-inverting input
13 4IN- Input Channel 4 inverting input
14 4OUT Output Channel 4 output
15,16 NC – No connect
Application Scenarios: In which products and applications is AD713JRZ-16 used
  • 4-channel 12-bit DAC output buffer array with 1us settling
  • Quad active filter bank for multi-channel sensor conditioning
  • 4-channel photodiode amplifier array with pA bias current
  • Professional audio 4-channel summing amplifier
Alternative Models: What chips are recommended as replacements for AD713JRZ-16
Manufacturer Part Number Package Notes
ADI ADA4610-4ARUZ TSSOP-14 Recommended replacement, RR output
TI OPA4141AIDR SOIC-14 Quad JFET, 11MHz, similar class
TI TL074ACDR SOIC-14 Industry standard, lower cost
ADI AD712JRZ SOIC-8 Dual version of AD713
ADI AD711JRZ SOIC-8 Single version of AD713

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1