Opens in a new tab

TPS72012YZUR

1.2V 300mA LDO, 85mV Dropout, 45uA Iq, DSBGA-4 (0.64×0.64mm)

3456

Effective Inventory

Image for reference only

Manufacturer Part:

TPS72012YZUR

Package:

DSBGA-4 (0.64 x 0.64 x 0.5 mm, chip-scale)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TPS72012YZUR from Texas Instruments is a 1.2V fixed-output, 300mA LDO regulator with 85mV dropout, 45 uA Iq, and enable pin in a DSBGA-4 chip-scale package.

Key Specifications

Type 1.2V Fixed Low-Dropout Linear Regulator
Output Voltage 1.2 V (fixed)
Output Current 300 mA
Dropout Voltage 85 mV (typical) @ 300mA
Input Voltage 1.6 V to 5.5 V
Quiescent Current 45 uA (typical)
PSRR 68 dB @ 1kHz
Output Noise 23 uVrms (10Hz-100kHz)
Enable Yes (active HIGH)
Package DSBGA-4 (0.64 x 0.64 mm)
Operating Temperature -40C to +125C

Features

  • Ultra-small 0.64 x 0.64 mm DSBGA package
  • 85 mV dropout at 300mA
  • 45 uA quiescent current
  • 68 dB PSRR at 1kHz
  • 23 uVrms ultra-low output noise
  • 1% output voltage accuracy
  • Stable with 0.47 uF ceramic output capacitor

Applications

  • FPGA core voltage regulation (1.2V)
  • Portable device power management
  • RF module power supply
  • Battery-powered precision analog
Product Introduction: TPS72012YZUR Product Introduction

The TPS72012YZUR from Texas Instruments is a 1.2V fixed-output LDO regulator in an ultra-small 0.64 x 0.64 mm DSBGA (Die-Size BGA) chip-scale package. The 85 mV typical dropout at 300mA enables efficient 1.2V regulation from a 1.5V or 1.8V supply rail. The 45 uA quiescent current is low enough for battery-powered applications while the 68 dB PSRR and 23 uVrms output noise support noise-sensitive RF and analog loads. The enable pin provides logic-controlled on/off switching with less than 1 uA shutdown current. Stability is maintained with just a 0.47 uF ceramic output capacitor. The 1% output voltage accuracy ensures tight regulation for core voltage requirements.

Working Principle: TPS72012YZUR Working Principle

The TPS72012YZUR uses a PMOS pass element in a common-source configuration with the error amplifier driving the gate. The internal bandgap reference generates a precision 0.5V reference that is compared with a divided-down version of the output voltage. The error amplifier adjusts the PMOS gate to maintain regulation. The 85 mV dropout is achieved by using a low-VGS(th) PMOS transistor that can operate with minimal headroom. The 68 dB PSRR at 1kHz comes from the high loop gain at audio frequencies. The 23 uVrms output noise is achieved through careful design of the bandgap reference and error amplifier noise contributions. The DSBGA package directly exposes the die bumps, providing the smallest possible footprint with no package parasitics between the die and PCB. The enable pin controls a bias switch that disconnects all internal circuitry in shutdown, reducing supply current to less than 1 uA.

Pin Description: TPS72012YZUR Pin Definition and Functions
Pin/Bump Name Type Function
A1 EN Input Enable (HIGH=on, LOW=off)
A2 OUT Output Regulated 1.2V output
B1 GND Ground Ground
B2 IN Input Unregulated input (1.6-5.5V)
Application Scenarios: In which products and applications is TPS72012YZUR used
  • FPGA 1.2V core rail from 1.8V I/O supply with 85mV dropout
  • BLE radio 1.2V supply with 68dB PSRR for clean RF
  • Portable sensor node 1.2V rail with 45uA quiescent current
  • Space-constrained design requiring 0.64mm x 0.64mm package
Alternative Models: What chips are recommended as replacements for TPS72012YZUR
Manufacturer Part Number Package Notes
TI TPS72018YZUR DSBGA-4 1.8V version, same family
TI TPS72001YZUR DSBGA-4 Adjustable version, same family
TI TLV70012DQNR SON-4 1.2V, 300mA, similar class
Microchip MIC5365-1.2YD5-TR SOT-23-5 1.2V, 150mA, larger package
Diodes Inc AP2112K-1.2TRG1 SOT-23-5 1.2V, 600mA, larger package

Recommend Parts

MSP432P401RIPZR

Ultra-low-power Cortex-M4F MCU, 48MHz, 256KB Flash, 14-bit ADC, 850nA standby, 100-LQFP

Brand: TI

Package: 100-LQFP (14 x 14 x 1.4mm)

IN STOCK: 3750pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PTN78060WAH

4.5A positive-input buck-IT module, adjustable, SMD module

Brand: TI

Package: Module (34.3 x 19.3 x 8.2 mm)

IN STOCK: 4786pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC16F1526-I/PT

8-bit PIC16 MCU, 14KB Flash, 768B RAM, 30-ch 10-bit ADC, 10x CCP, 64-TQFP, XLP

Brand: MICROCHIP

Package: TQFP-64 (10.0 x 10.0 x 1.05 mm)

IN STOCK: 5600pcs

Cargo cycle: 3-7 Days

The minimum order is 1

R2A20178NP

8-channel 8-bit voltage output DAC, R-2R architecture, buffered rail-to-rail output, SPI interface up to 25MHz, 2.7-5.5V

Brand: Renesas

Package: 24-pin HWQFN (4x4x0.75mm)

IN STOCK: 6399pcs

Cargo cycle: 3-7 Days

The minimum order is 1

VS-40CPQ100-N3

Dual Schottky rectifier, common cathode, 2x20A, 100V, 0.61V VF, TO-247AC-3L, Vishay Q-series, 175 degC TJ, guard ring

Brand: VISHAY

Package: TO-247AC 3L (3-lead through-hole, 15.5mm width, tab for heatsink, common cathode configuration)

IN STOCK: 8950pcs

Cargo cycle: 3-7 Days

The minimum order is 1

BSC040N10NS5

OptiMOS 5 N-ch 100V 4mΩ 136A MOSFET, SuperSO8

Brand: infineon

Package: PG-TDSON-8 (SuperSO8, 5 x 6mm)

IN STOCK: 10509pcs

Cargo cycle: 3-7 Days

The minimum order is 1